First Alert Smartbridge Mobile User Manual

Smartbridge Mobile Software V2.3.7

iPhone / iPad

1. Launch the Apple App store and search for “Smartbridge”.

2. Once the app is downloaded and installed, launch the app and enter your SmartBridge ID

number. Under the advanced tab you must enter the User Name and Password you set in the

DVR under the “Network User” accounts.
Note: Default Username is “abc” and default password is “123”.

3. You will now be logged in and be able to view your camera(s). Initially, the app will launch in

Quad channel mode, as shown below. Please note that the view can be switched to portrait or

landscape view by tilting the Apple device itself.

1

4. Press the button to switch the quad View mode. Here the different camera channels

can be cycled through by swiping to the left or right to view additional cameras installed.

Double tap one channel to place that channel in full screen mode. Double tap again to return

the quad view mode.

5. Press the arrow key button in quad view mode and the app will exit quad view mode

and return to the main screen.

2