First Alert SA320CN User Manual

Product features:

• Utilizes both ionization and photoelectric smoke sensors for optimal performance

• Intelligent sensing technology reduces non- emergency or nuisance alarms

• Single Button Silence/Test mutes unwanted alarms

• Operates on 2-AA batteries (included)

• 10-Year Limited Warranty

SA320CN

Dual Sensor Smoke Alarm

Optimal sensing of smoke particles produced in both aming and smoldering res.

Dual Smoke Sensors

Smart Sensing

Mute Button

Individual Item Dimensions: Case Pack Dimensions

Retail Pack/

Item #’s: Description: UPC

SA320CN Smoke Alarm 029054007384 30029054007385 3/1 2.5 7 8.5 0.73 7.75 7.31 9.06 2.28

I2of5

Selling Unit D/L” W” H” (lbs) D/L” W” H” (lbs)

CM3047

CAT.

SA320CN

MOUNTING

TOP VIEW SIDE VIEW

5.0"

2.0"

ARCHITECTURA L A N D ENGINEERING SP EC

The smoke alarm shall be a First Alert Model SA320 and shall provide at a minimum the following features and functions:

1. Two smoke sensing chambers - photoelectric and ionization.

2. Powered by two AA alkaline batteries and have a solid state piezo horn rated at 85dB at 10 ft. and shall be capable of self restoring.

3. A visual power-on indicator to conﬁrm unit is receiving power.

4. Two Latching features: Alarm Latch to easily identify initiating alarm after alarm condition has subsided. Low battery latch: to visually identify which unit is in low battery condition. Two Silence Features: Alarm Silence to temporarily silence nuisance alarms. Low Battery Silence to silence low battery chirp for up to 8 hours.

5. Two Locking features - tamper resistant locking pins that lock battery drawer and/or alarm to mounting bracket.

6. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 95%.

7. The unit shall contain mounting hardware and shall be listed for wall or ceiling mounting.

8. The unit shall have a gasketless base for easy install keeping alarm secure over a wide rotation range to allow for true alarm alignment.

9. The unit shall at a minimum meet the requirements of UL217, CSFM, NFPA 72 and the ICC.

BRACKET

ation and be capable of

TECH NIC AL SPE C S

Alarm Dimensions: 5.0” dia x 2.0”H

Weight: 8.6 oz

Operating Voltage: Two 1.5V AA alkaline batteries

Temperature Range: 40°F (4°C) to 100°F (38°C)

Humidity Range: 10% to 95% relative humidity (RH)

Audio Alarm: 85dB at 10 feet

Test/Silence: Electronically simulates smoke condition, causing the unit to alarm. Press and hold test/silence button

Alarm Reset: Automatic when smoke clears

Smoke Sensors: Photoelectric and Ionization

Indicator Lights/Sounds: DC Power: Intermittent Green LED Local Alarm: Red LED ﬂashes rapidly Alarm Latch: LED ﬂashes red 2 sec on, 2 sec off after local alarm stops Low Battery Latch: LED ﬂashes green 2 sec on, 2 sec off

Listing: Listed to UL217 Standard

S H I PPING SP ECS:

Individual Carton Dimensions 2.5"L x 7.0"W x 8.5"H

.sbl 37.0 thgieW

4 83700 45092 0 CPU

Master Carton Dimensions 7.7"L x 7.31"W x 9.06"H

Master Pack 3

.sbl .282 thgieW

300 29054 00738 5 :5fo2I

INSTALLATION OF ALA R M

THE PARTS OF THIS SMOKE ALARM

TOP OF ALARM

1. Test/Silence button

2. Slide-open battery drawer

3. Power/Alarm light

BOTTOM OF ALARM

1. Mounting bracket

2. Mounting Slots

3. Battery Drawer - Install 2 AA batteries here

4. Turn this way to remove from bracket

5. Turn this way to attach to bracket

Pallet Information

Cases per Layer 30

Number of Layers: 5

Cases per Pallet: 150

Units per pallet: 450

BATTERY DRAWER LOCK

Remove Pin from

Mounting Bracket

ﬁrstalert.com

Close Door. Insert Pin in Holes through alarm and Battery Drawer

First Alert is a registered trademark of the First Alert Trust BRK is a registered trademark of BRK Brands, Inc. CM3044

.sbl 350 :thgieW