First Alert 2084DF, 2118DF, 2054DF User Manual
Operation & Installation Guide
MFFS2054DF84DF18DFE0809
ENGLISH
Model 2054DF
Model 2084DF
Model 2118DF
DIGITAL
Read These Instructions Very Carefully!
Home and Office Security Safes
Index
Overview of Your Safe .............................................
Programming Preparation .......................................
Step 1. Installing Batteries
Step 2. Opening Safe with Override Key
Programming a Passcode .........................................
LCD Display Menu
Step 3. Programming a Passcode
Opening & Closing Digital Safe ...............................
Open Safe with Passcode & Key
Close Safe
Open Safe with Override Key
Additional Features: Shelves....................................
Additional Features: Bolt-Down Kit .........................
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Consumer Affairs ...................................................
Use, Care and Maintenance .....................................
Page 8
Page 10
For Your Protection
• Do not remove the Serial Number tag from the safe.
• Store Emergency Override Keys away from (NEVER INSIDE) safe.
• Record all Safe Identication Numbers on Safe Identication
Record (last page).
• Save this manual and NEVER keep it inside the safe.
Overview of Your Safe
WELCOME!
Your new First Alert® Fire Theft Safe™ will provide years of safe and secure
protection for your valuables, important documents and other personal items.
All First Alert® safes are designed and built using the highest manufacturing
standards to ensure maximum user satisfaction under a variety of conditions.
With proper care, your First Alert® safe will provide “Peace of Mind” for many
years to come.
Thank you and Enjoy!
The following list outlines the items and quantities of each included with
your new safe. Please carefully check the list to confirm all items have been
received. If any item is missing, then please contact Consumer Affairs
@ 1-800-223-8566.
Package Contents
All Models
1 First Alert® Firesafe
1 Operation & Installation Guide
2 Companion Entry Keys
Models 2054DF (only)
1 Bolt-Down Kit Including:
1 Mounting Template
4 Break-off Bolts
4 Washers
1 Removable Shelf
Models 2084DF / 2118DF (only)
1 Adjustable Shelf
4 Shelf Support Clips
Important: DO NOT RETURN SAFE TO STORE
If you are missing parts, have difculty programming your safe or
have any other questions pertaining to its proper use and care, DO
NOT RETURN your safe to the store. Please contact Consumer Affairs
at 1-800-223-8566 (USA & Canada) for assistance.
Home and Office Security Safes
1
Programming Preparation
Step 1. Installing Batteries
The digital keypad is powered by 4 “AA” batteries which
must be installed before you can begin programming
your personal code. For your convenience, we have
provided you with 4 “AA” batteries. For best results
and depending on use, we recommend replacing the
batteries at least once a year.
1. Locate battery compartment to the right of the
digital keypad.
2. To open the compartment, press firmly in on the
battery cover and slide it to the right for removal.
3. Install 4 new “AA” batteries in the battery
compartment. Make sure they are installed in the
correct direction as marked on the inside of the
battery compartment.
4. Once the batteries are installed properly, replace
the cover by sliding it back on from the left.
Important: BATTERY REMOVAL
If the batteries are removed or fail, the
keypad memory will NOT be erased.
BATTERY
COMPARTMENT
Step 2. Open Safe with Override Key (square top)
You will need access to the inside of the safe door to begin
programming. You must use the Emergency Override Key
(square top) to open the door for the first time.
1. Insert the Emergency Override Key (square top) in the
lock, turn to the left (counterclockwise) and pull the door open.
Important: TURN OVERRIDE KEY TO LEFT ONLY
When using the Emergency Override Key, you must
ONLY TURN IT TO THE LEFT. Turning it to the right
may cause key to become stuck in the cylinder and
may cause damage to the lock.
2
Programming A Passcode
LCD Display Menu
Your new Digital Firesafe features an LCD display to assist in programming and
operating your safe. A menu of the codes is as follows:
LCD
Ready to enter your passcode
Passcode successfully programmed
Correct passcode entered
Incorrect passcode entered
Batteries (“AA”) must be replaced
Step 3. Programming a Passcode
Use the digital keypad to program your own 3 to 8 digit
passcode. You may choose or change your personal
passcode at any time by following these steps:
1. Locate the memory button marked on the
inside of the door.
2. Using a pen or other blunt tip, quickly push
and release the memory button.
3. After you hear a “beep”, the LCD display will read
“OPEN” and you may begin entering your personal
code (from 3 to 8 numbers) followed by the # button.
4. Next, you will hear a longer “beep” and the
LCD display will read “CODE”, indicating that your
personal code has been successfully programmed and
can now be used to open your safe.
DISPLAY
MEMORY
BUTTON
Important: SECURITY LOCKOUT PERIODS
For added security, the safe will automatically “Lockout” entry
for 5 minutes after three attempts to open with an invalid
passcode. After three more invalid attempts within this time
period, a one-hour “lockout” period will begin. During these
“Lockout” periods, entry MUST BE MADE using the emergency
override key.
Home and Office Security Safes
Loading...