Firex 592SC, 591S User Manual

The professional choice in fire safety.

The NEW remote accessories are designed to be used with
Firex duct smoke detectors to provide the most complete
functionality ever available in such a device.

The remote accessory is available with either the single gang
remote indicator/control (591 models), or with the addition of
a single gang strobe assembly (592 models). Both versions
are compatible with standard Decora style cover plates
(choice of white, red or stainless steel). A strobe-only version
(593 models) is available for retrofit upgrade of “controller
only” installations.

The indicator/control assembly provides:

●

Visual indication of detector Pilot, Trouble and Alarm
Functions

●

Selectable audible indication of Alarm, Trouble or both

●

Buzzer Silence function, with silenced indication and
“ringback” following condition correction

●

Lamp/Buzzer test function

●

Key-Operated detector Test and Reset functions

●

Lever-operated “No-Tools” terminal block

●

Port for plugging in the optional strobe assembly

●

Black “DUCT SMOKE DETECTOR” decal included for
front plate

●

Blue “SMOKE”, red “FIRE” strobe lens decals included for
both horizontal and vertical mounting

Strobe Connection

The strobe assembly provides visual indication of alarm
conditions, and is connected to the indicator/control
assembly via the provided polarized connector.

To install the strobe module, simply plug the provided
connector onto the pins as indicated on the rear of the
indicator/control module. Snap the strobe lens into the cover
plate, and install cover plate following completion of remote
module wiring.

NOTE: The strobe and audible buzzer features are not ADA
compliant, and not intended for life safety notification or
evacuation purposes (public mode). These functions are for
duct smoke detector status indication only (private mode).

Duct Smoke Detector
Remote Accessories

Universal Voltage Models Compatible with
230 VAC, 115 VAC, 24 VAC or 24 VDC operation

2650-760 Ionization • 2650-761 Photoelectric
2650-660 Ionization • 2650-661 Photoelectric
2650-560 Ionization • 2650-561 Photoelectric

NEW ACCESSORIES

591S

592SC

Audible Buzzer Configuration

There are two jumpers located on the rear of the
indicator/control assembly. To enable audible buzzer
operation for Alarm or Trouble conditions, simply leave the
jumpers in place. To disable either or both functions,
remove the appropriate jumper(s).

TBL

ALM

Buzzer will

function on

both Alarm

and Trouble

Conditions

TBL

ALM

Buzzer will

function on

on Alarm

Condition

only

TBL

ALM

Buzzer will

function

on Trouble

Condition

only

TBL

ALM

Buzzer

will not

function

on Alarm

or Trouble

Conditions

591 Series Remote Accessory Controllers

591W Remote Indicator/Control Assembly w/White Single Gang Cover Plate
591R Remote Indicator/Control Assembly w/Red Single Gang Cover Plate
591S Remote Indicator/Control Assembly w/Stainless Steel Single Gang Cover Plate

592 Series Remote Accessory Controllers with Strobe

592WC Remote Indicator/Control Assembly w/Strobe Assembly (Clear Lens); White Double Gang Cover Plate
592WO Remote Indicator/Control Assembly w/Strobe Assembly (Opaque Lens); White Double Gang Cover Plate
592RC Remote Indicator/Control Assembly w/Strobe Assembly (Clear Lens); Red Double Gang Cover Plate
592RO Remote Indicator/Control Assembly w/Strobe Assembly (Opaque Lens); Red Double Gang Cover Plate
592SC Remote Indicator/Control Assembly w/Strobe Assembly (Clear Lens); Stainless Steel Double Gang Cover Plate
592SO Remote Indicator/Control Assembly w/Strobe Assembly (Opaque Lens); Stainless Steel Double Gang Cover Plate

593 Series Remote Accessory Strobes (as an optional field upgrade kit for existing installed 591 Series Controllers)

593RC Strobe Assembly (Clear Lens); Red Double Gang Cover Plate
593RO Strobe Assembly (Opaque Lens); Red Double Gang Cover Plate
593SC Strobe Assembly (Clear Lens); Stainless Steel Double Gang Cover Plate
593SO Strobe Assembly (Opaque Lens); Stainless Steel Double Gang Cover Plate
593WC Strobe Assembly (Clear Lens); White Double Gang Cover Plate
593WO Strobe Assembly (Opaque Lens); White Double Gang Cover Plate

Products

Controls Americas

515 South Promenade Avenue
Corona California 92879-1736 USA
Cust. Svc. Telephone [phone]
Cust. Svc. Facsimile [phone]
[e-mail]

3505 Laird Road Unit #14
Mississauga Ontario L5L 5Y7 Canada
Cust. Svc. Telephone [phone]
Cust. Svc. Facsimile [phone]
[e-mail]

Technical Service

Telephone [phone]
Facsimile [phone]
[e-mail]

© 2006 Invensys Controls Americas 6/06 - #150-1991

Power Requirements: Standby 13mA

Alarm LED 22mA
Trouble with Buzzer 33mA
Trouble Silenced 33mA
Trouble without Buzzer 13mA
Alarm with Buzzer 37mA
Alarm Silenced with Buzzer 37mA
Alarm with Buzzer and Strobe 154mA
Alarm Silenced with Buzzer and Strobe 157mA
Lamp Test with Buzzer 62mA
Lamp Test with Buzzer Silenced 52mA

Sound Pressure: 60db @ 10 ft.

Dimensions: Single Gang Plate:

4-1/2” (114.3 mm) H x 2-3/4”
(69.85 mm) W

Double Gang Plate:

4-1/2” (114.3 mm) H x 4-1/2”
(114.33 mm) W

Wiring: 14-28 AWG. Solid or Stranded

Approvals: U.L. Listed for use with Firex duct

smoke detectors including all 2650
Series duct smoke detectors
UL URRQ, URRQ7.S7425 / CSFM / MEA

Silence and Ringback Functions

On the occasion where an audible alarm or trouble condition needs to be silenced while the detector
condition is inspected and remedied, the indicator/control module provides a silence function. The slide
switch located on the front of the module is pushed DOWN to activate the silence function.

Upon correction of the notified condition, the silenced buzzer will resume sounding. The ringback
feature serves as a reminder to reset the silence switch to the “normal”, UP position.

Note that the strobe module, when installed, will not stop operating when the silence function is engaged.

Wiring

For appropriate duct detector wiring terminals, please refer to detector and remote
accessory installation instructions.

T

H

R

E

E

Y

E

A

R

W

A

R

R

A

N

T

Y

R

US

LISTED

268A Listed

MEA ACCEPTED

Normal

“Standby”

Mode

Silenced

Mode

T

I

N

S

I

G

A

L

C

I

L

F

F

O

O

R

E

N

T

I

A

A

T

S

S

T

L

A

A

T

H

E

S

S

R

F

I

A

R

M

E

E

E

C

R

I

V