Firestone Sport Rite, NCD-5819-3 User Manual

AIR COMMAND

AIR COMPRESSOR ACCESSORY KIT

2047 / 2232

INSTALLATION INSTRUCTIONS

Congratulations on your purchase of a new Ride-Rite
Air Compressor Accessory Kit. This kit will be an asset to
your vehicle, meeting nearly any of your air supply needs.

Please take a few minutes to read through the
instructions, identify the components, and learn how to
properly install your Air Compressor Accessory Kit.

PARTS LIST

COMPRESSOR 9210 1
AIR TANK 9127 1
25 FT. EXTENSION HOSE 9006 1
3/8" -16 x 1" HEX BOLT 4
3/8" -16 FLANGED HEX NUT 4
3/8" FLAT WASHER 4
10 -32 x 1" MACHINE SCREW 3
10 -32 NYLON-INSERT HEX NUT 3
3/16" FLAT WASHER 6
PUSH-TO-CONNECT

1/4 NPT MALE FITTING 1

NOTE:

If you are planning to install the Ride-Rite Fully
Automatic control or Cab Control Height Adjustment
systems, the Air Compressor Accessory Kit and the Ride­Rite air helper springs kit designed to fit your vehicle must
first be installed. Contact Firestone for more information.

TOOLS REQUIRED:

• U

TILITY KNIFE

• F

LAT SCREW DRIVER

• W

IRE CRIMPER/STRIPPER

• (2) 9/16"

PRESSURE SWITCH 1
COMPRESSOR T-FITTING 1
TANK VALVE 1
18 FT. AIR LINE TUBING 9038 1
NYLON TIE 6
15 FT. 16 GAGE WIRE WITH 1/4"
SPADE CONNECTOR 1
QUICK-SPLICE CONNECTOR 1
FEMALE SPADE TERMINAL 1
20 AMP BLADE FUSE 1
FUSE HOLDER 1

OPEN-END WRENCH

• 3/8"

• E

• 1/2"

• 3/8"

LECTRIC DRILL

DRILL BIT

WRENCH
WRENCH

24-8128 03-01 NCD-5819-3

Air T ank Attachment

3/8”-16 X 1-1/2

HEX BOLTS

3/8” FLAT WASHER

VEHICLE PANEL

3/8” LOCK NUT

PUSH-TO-CONNECT

MALE CONNECTOR

AIR TANK BRACKET

Air Compressor Accessory Kit

WR1-760-2047

INFLATION VALVE

AIR TANK

AIR LINE

PUSH-TO-CONNECT
MALE CONNECTOR

25' Extension Hose

AIR LINE

AIR TANK BRACKET

PRESSURE

SWITCH

RED WIRE

BRASS "T"

FITTING

RED WIRE TO FUSE

BOX OR OTHER

POWER SOURCE

+

AIR COMPRESSOR

BLACK WIRE

Figure “A”