Fire Sense PH01-S XL Series, PH01-SS XL Series Instruction Manual
Questions, problems, missing parts? Before returning to your
retailer, call our customer service hotline at 1-866-985-7877,
9 a.m. – 6 p.m., EST, Monday – Friday or email at
cservice@welltraveled.net.
ATTACH YOUR RECEIPT HERE
Serial Number ______________ Purchase Date _____________
XL Series Patio Heater
Instruction Manual
Supplier Model# PH01-S, PH01-SS
Item # 61587,61588,61589,61590,61591,61592,61593
61594,61595,61600,61601
1
TABLE OF CONTENTS
Table of Contents………………………………….....................Page 2
Before You Begin............................................................Page 2
Safety Information.........................................................Page 3-4
Package Contents………………………………….....................Page 5
Hardware Contents..........................................................Page 6
Assembly.........................................................................Page 7-16
Operating Instructions……………......................................Page 16-19
Care and Maintenance……………………..............................Page 19-20
Troubleshooting……………………………………......................Page 21
Replacement Parts List.....................................................Page 22
Warranty Information…………….....................................…Page 23
BEFORE YOU BEGIN
Please read and understand this entire manual before attempting to assemble, operate or install this appliance.
If you have any questions regarding the product, please call customer service 1-866-985-7877, 9 a.m. –
6 p.m., EST, Monday – Friday.
This manual contains important information about the assembly, operation and maintenance of this patio
heater. General safety information is presented in the first few pages and is also located throughout this manual.
Keep this manual for future reference and to educate new users of this appliance. This manual should be read
in conjunction with the labeling on the appliance. Safety precautions are essential when any mechanical or
propane fueled equipment is involved. These precautions are necessary when using, storing, and servicing.
Using this appliance with the respect and caution demanded will reduce the possibilities of personal injury or
property damage. The following symbols shown below are used extensively throughout this manual. Always
heed these precautions, as they are essential when using any mechanical or propane fueled equipment.
2
SAFETY INFORMATION
3
SAFETY INFORMATION
4
PACKAGE CONTENTS
PART
DESCRIPTION
QTY
1
Reflector
3 outer pcs and 1 center cap
2
Head Assembly
1
3
Gas Hose
1 pc (attached to head assembly)
4
Post Assembly
2 pcs
5
Regulator
1
6
Tank Housing
1
7
Post Support
1
8
Support Legs
3 pcs
9A
Base
1
9B
Sand/Waterbox
1 (pre-assembled to base)
10
LPG Cylinder Holder
3
11
Wheel Assembly
1 pc (hardware is pre-assembled
to wheel assembly)
*Some XL Series models include an optional table assembly
which is to be installed immediately after Step 9. Please refer to
page 12 for a list of table components and assembly instructions.
5
HARDWARE CONTENTS
Blister Pack Hardware Contents: (Packaged inside the top section of the Heater Carton)
Zip Lock Bag Hardware Contents: (Packaged inside the Heater Carton)
4-PC Reflector Hardware Bag: (Packaged with the 4-Pc reflector panels)
6
ASSEMBLY
PREPARATION
Before beginning assembly of this appliance, make sure all parts are present. Compare all parts with package
contents list as listed on page 5 of this manual. If any part is missing or damaged, do not attempt to assemble
this product. Contact customer service for replacement parts.
ESTIMATED ASSEMBLY TIME: 60 minutes
Tools Required for Assembly (Included)
Open end wrench 10mm and 13mm
Tools Required for Assembly (NOT included):
Philips screwdriver w/medium blade
Leak Test Solution (one part liquid dishwashing detergent and three parts water)
Adjustable opening wrench, 8" long
Other items required for assembly:
AAA Battery: This heater has a Rapid-Spark Electronic Ignition system and will require installation of
1) AAA battery. (NOT INCLUDED) The battery should be installed by unscrewing the RED IGNITER
BUTTON on the front of the burner head assembly.
Once the battery has been installed please test the ignition system by briefly pressing the red igniter
button. If you hear a rapid series of sparks your Rapid-Spark Electronic Ignition system is working
properly. If you do not hear any sparks please check to make sure the battery in installed in the correct
direction and that it is fresh and fully charged.
Otherwise please refer to the troubleshooting guide on page 21 of this manual for further assistance.
Sand (25 Lbs) for filling the Sand/Waterbox: Your Fire Sense XL Series patio heater comes standard
with an empty PVC Sand/Waterbox container which is pre-assembled to the heater base. Once filled with
sand, this weighted container will add approximately 25 lbs. to the base of the heater providing extra
stability and safety.
Tip: When filling with sand, having a funnel on hand will be helpful. If possible, use easy-to-pour, dry
silica sand (available at most home improvement centers.)
Note: The Sand/Waterbox container may also be filled with water (mild weather climates) or automotive
windshield washer fluid (cold weather climates) however, the additional weight when filled with water or
windshield washer fluid will only add approximately 18 lbs. to the heater base as compared to the 25 lbs. when
filled with sand.
Tip: To add an additional 5-6 lbs. of weight to a sand filled base, add water (mild weather climates) or windshield
washer fluid to the base after filling it with sand.
7
Loading...