Fire Sense 61491 User Manual

ASSEMBLY INSTRUCTIONS

ITEM 61491, CAST ALUMINUM BENCH

Table of Contents:

General Information...................Page 2

Safety Information……………………Page 2

Preparation................................Page 2

Parts List…………………………………..Page 3
Assembly………………………………….Page 4

Warranty Information………………Page 5

**IMPORTANT NOTICE**

Do NOT return to place of purchase. For customer

Service and warranty issues, please contact our

TOLL FREE HOTLINE: [phone] or Email: [e-mail].

Hotline hours: Mon – Fri, 9AM to 6PM, EST

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

1

ITEM 61491, CAST ALUMINUM BENCH

GENERAL INFORMATION:

Your new bench is made from the finest materials available. It should provide many
years of enjoyment with minimal care.

Keep your bench clean and apply a coat of wax a few times a year. For best results,
clean the bench with warm soapy water and use an outdoor furniture wax. If you use
furniture covers, always make sure the bench is clean and completely dry before
covering as mold may form in dark, wet places. Check the bolts on your bench regularly
to make sure they are tight.

To provide a rust free product this bench is made of Cast Aluminum which is a relatively
soft material. Be careful not to over tighten your hardware. Stripped hardware is not
covered under the manufacturer's warranty. The weight limit for this bench is 225 lbs.

SAFETY INFORMATION:

WARNING

DO NOT stand or allow children to stand on the assembled product.
DO NOT tighten bolts completely until instructed to do so. After final alignment, make
sure all nuts and bolts are securely fastened.
NEVER use a power tool to assemble or tighten your furniture. Perform periodic checks
to make sure the hardware is secure and tighten if needed.

CAUTION

READ all instruction before beginning assembly. Failure to do so may result in faulty
assembly and potential injury. Assemble the item on a soft, non-abrasive surface such as
a carpet or cardboard to avoid damaging the item.

PREPARATION

Before beginning assembly, make sure all parts are present. Compare parts received
with the "Parts List." If any part is missing or damaged, do NOT attempt to assemble the
product. Contact our Customer Service Hotline toll-free at 1-866-985-7877, Mon – Fri,
9AM to 6PM, EST.

2