Outdoor Patio Heater
Model # LIP-10A-TGG-LPG-SP
Item # 61125/61126/61127/61128/61 130
ATTACH YOUR RECEIPT HERE
Serial Number ___________ Purchase Date ______
Questions, problems, missing parts? Before returning to your
retailer, call our customer service hotline at 1-866-985-7877,
9 a.m. – 6 p.m., EST, Monday – Friday or email at
cservice
welltraveled.net.
- 1 -
PACKAGE CONTENTS
PART DESCRIPTION QTY
A Reflector Panel
4 pcs (packed
in 2 inner ctns)
B Reflector Center Cap 1
C Head Assembly
1 (packed in 1
inner ctn)
D Tank Housing 1
1 (attached to
E Gas Hose
Head
Assembly)
F Upper Post 1
1 (packed with
G Regulator
Head
Assembly)
H Lower Post 1
I Post Supports
3 (packed in 1
inner ctn)
J Base 1
2 (packed with
K Wheels
Head
Assembly)
- 2 -
HARDWARE CONTENTS
SAFETY INFORMATION
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install this appliance.
If you have any questions regarding the product, please call customer service 1-866-985-7877, 9 a.m. –
6 p.m., EST, Monday – Friday.
This manual contains important information about the assembly, operation and maintenance of this patio
heater. General safety information is presented in the first few pages and is also located throughout this manual.
Keep this manual for future reference and to educate new users of this appliance. This manual should be read
in conjunction with the labeling on the appliance. Safety precautions are essential when any mechanical or
propane fueled equipment is involved. These precautions are necessary when using, storing, and servicing.
Using this appliance with the respect and caution demanded will reduce the possibilities of personal injury or
property damage. The following symbols shown below are used extensively throughout this manual. Always
heed these precautions, as they are essential when using any mechanical or propane fueled equipment.
- 3 -
SAFETY INFORMATION
PREPARATION
Before beginning assembly of this appliance, make sure all parts are present. Compare all parts with package
ASSEMBLY
contents list and hardware contents as listed on pages 2 and 3 of this manual. If any part is missing or damaged,
do not attempt to assemble this product. Contact customer service for replacement parts.
ESTIMATED ASSEMBLY TIME: 60 minutes
Tools Required for Assembly (NOT included):
Phillips screwdriver w/medium blade
Leak Detection Solution
Adjustable wrench (2) (Note: 10mm wrench or socket should fit M6 bolt; 13mm wrench or socket should fit M8
bolt.)
- 5 -