OWNER’S MANUAL
Tabletop Heater
Safety First!
Read and become familiar
with this entire manual.
Please retain this manual for reference
TABLE OF CONTENTS
• Read These Safety Instructions………………………….. 1
• Contents Breakdown……………………………………… 2
• Screw Packing List………………………………………… 3
• Assembly Procedure………………………………………. 3
• Assembly……………………………………………………. 4
• Safety First………………………………………………….. 7
• Tabletop Heater Location…………………………………. 8
• Checking For Leaks………………………………………... 8
• Before Operating…….……………………………………... 8
• Operating……………………………………………………. 9
• After Operating……………………………………………… 11
• Maintenance………………………………………………… 11
• Storage………………………………………………………. 11
• Troubleshooting…………………………………………….. 12
READ THESE SAFETY INSTRUCTIONS
If you smell gas:
• Shut off gas to the appliance.
• Extinguish any open flame.
• If odor continues, immediately call your gas supplier or your Fire
Department.
WARNING
Failure to comply with these instructions could result in a fire or
explosion that could cause serious bodily injury, death, or property
damage.
ATTENTION
• Only to be used outdoors.
• Warning: Accessible parts may be very hot. Keep young children
away.
• Turn off the gas supply at the gas container after use.
• Any modification of the a
liance may be dangerous.
FOR YOUR SAFETY
• Gas leaks may cause a fire or explosion that can cause serious bodily injury
or death, or damage to property.
• You must follow all leak checking procedures before operating this unit.
• Never use an open flame to check for leaks.
WARNING
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of
this or any other appliance.
Danger: Carbon Monoxide hazard:
1. This appliance can produce carbon monoxide which has no odor.
2. Using it in an enclosed space can kill you.
3. Never use this appliance in an enclosed space such as a camper, tent, car or
home.
• Do NOT touch or move heater for at least 45 minutes after use.
• Dome is hot to the touch.
• Allow dome to cool completely before touching.
1
Item
No.
1 M6 Castle nut 3 11 Burner 1
2 Reflector 1 12 3/16” bolt 4
3 6mm Washer 3 13 M5x10mm bolt 1
4 Emitter screen 1 14 Tank Housing 1
5 Guard 1 15 Igniter button 1
6 Door Plate 1 16 Control knob 1
7 Base 1 17 Handle 1
8 Cast Iron weight 1 18 Regulator 1
9 M6x15mm bolt 4 19 60mm pin 3
10 3/16” bolt 4 20 M6 flange nut 3
Item Qty.
Item
No.
Item. Qty.
SCREW PACKAGING LIST
Item Qty. Item Qty.
M6 Castle Nut 3 M5x10mm bolt & M5 nut 1
6mm washer 6 60mm pin 3
M6x15mm bolt 4 M6 flange nut 3
3/16” bolt 8 Wrench 1
ASSEMBLY PROCEDURE
Tools needed: (not included)
• Adjustable opening wrench (2) 20 cm long
• Slip joint pliers 23 cm long
• Philips screwdriver w/medium blade
3