Fire Magic Grill Accessory Cover User Manual
Grill & Accessory Cover
This cover is for use with your Fire Magic product. It is constructed
of a durable material that will protect your appliance when not
in use. Many covers are designed with double-stitched vents to
provide ventilation.
To install a built-in cover, place the cover over your unit, with
the Fire Magic logo facing forward. If the cover is equipped with
clips, carefully secure them at the front-bottom edge of the unit.
Reference Fig. 1-1 for an example.
To install a countertop cover, place the cover over your unit,
with the Fire Magic logo facing forward/upward. If the corners of
the cover are equipped with elastic cords, carefully pull each cord
over the notches found on the corners of the unit.
Built-in cover shown, design may vary
To install a stand alone cover, place the cover over your unit
with the Fire Magic logo facing forward. If the cover is equipped
with Velcro strips, they may be used to secure the skirt portion of
the cover.
To clean the cover, use mild hand soap with warm water and a
sponge.
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
REV 2 - 1412091120
This cover is for use with your Fire Magic product. It is constructed
of a durable material that will protect your appliance when not
in use. Many covers are designed with double-stitched vents to
provide ventilation.
To install a built-in cover, place the cover over your unit, with
the Fire Magic logo facing forward. If the cover is equipped with
clips, carefully secure them at the front-bottom edge of the unit.
Reference Fig. 1-1 for an example.
Fig. 1-1
It is recommended that you wash the cover only
as needed.
To prevent mold and mildew: wipe down and
dry your cover with a soft towel or cloth after
cleaning or rainfall.
L-C2-412
Grill & Accessory Cover
To install a countertop cover, place the cover over your unit,
with the Fire Magic logo facing forward/upward. If the corners of
the cover are equipped with elastic cords, carefully pull each cord
over the notches found on the corners of the unit.
To install a stand alone cover, place the cover over your unit
with the Fire Magic logo facing forward. If the cover is equipped
with Velcro strips, they may be used to secure the skirt portion of
the cover.
To clean the cover, use mild hand soap with warm water and a
sponge.
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
REV 2 - 1412091120
Built-in cover shown, design may vary
Fig. 1-1
It is recommended that you wash the cover only
as needed.
To prevent mold and mildew: wipe down and
dry your cover with a soft towel or cloth after
cleaning or rainfall.
L-C2-412
Loading...