Fire Magic 3092 User Manual

AUTOMATIC GRILL SHUT-OFF
1-HOUR TIMER INSTRUCTIONS
Rated up to 100,000 BTUs /
Model # 3092
Fit the Automatic Grill Shut-Off Timer in the gas supply line before the grill. The timer accommodates
Important: Ensure you connect the gas supply to the
side marked “IN” on the timer (see photo). It MUST NOT be fi tted within 18" of the grill, or it will overheat, causing damage to the timer and may result in a leak.
Use pipe joint compound on male fi ttings attached to the timer.
To use, set the dial (turn clockwise) to the desired time to shut
To use, set the dial (turn clockwise) to the desired time to shut off. The dial is marked in 3 one hour increments (any position
off. The dial is marked in 3 twenty minute increments (any in between is an estimate of that hour). The timer dial will auto
position in between is an estimate of that set time). The timer rotate (counter-clockwise) and will shut off the gas supply when
dial will auto rotate (counter-clockwise) and will shut off the gas the dial reaches OFF (i.e. the time is completed).
supply when the dial reaches OFF (i.e. the time is completed).
Important: When using the timer for periods of less than
Important: When using the timer for periods of less than
one hour, you must fi rst set the dial to 1 hour (to
twenty minutes, you must fi rst set the dial to activate), then return (counter-clockwise) to the
20 minutes (to activate), then return (counter­desired amount of time. This will ensure proper
clockwise) to the desired amount of time. This timer operation. See Fig. 1-1.
will ensure proper timer operation. See Fig. 1-1.
1
/2" NPT piping (both ends).
Max temperature 125°F
Gas fl ow direction
(to grill)
Gas supply
side
Turn past 20 minutes
to activate
Time settings: 20-60 minutes
Timer setting mark
(shown here in OFF)
Grill side
Fig. 1-1
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
REV 1- 1411100710
AUTOMATIC GRILL SHUT-OFF
1-HOUR TIMER INSTRUCTIONS
Model # 3092
Fit the Automatic Grill Shut-Off Timer in the gas supply line before the grill. The timer accommodates
Important: Ensure you connect the gas supply to the
side marked “IN” on the timer (see photo). It MUST NOT be fi tted within 18" of the grill, or it will overheat, causing damage to the timer and may result in a leak.
Use pipe joint compound on male fi ttings attached to the timer.
To use, set the dial (turn clockwise) to the desired time to shut
To use, set the dial (turn clockwise) to the desired time to shut off. The dial is marked in 3 one hour increments (any position
off. The dial is marked in 3 twenty minute increments (any in between is an estimate of that hour). The timer dial will auto
position in between is an estimate of that set time). The timer rotate (counter-clockwise) and will shut off the gas supply when
dial will auto rotate (counter-clockwise) and will shut off the gas the dial reaches OFF (i.e. the time is completed).
supply when the dial reaches OFF (i.e. the time is completed).
Important: When using the timer for periods of less than
Important: When using the timer for periods of less than
one hour, you must fi rst set the dial to 1 hour (to
twenty minutes, you must fi rst set the dial to activate), then return (counter-clockwise) to the
20 minutes (to activate), then return (counter­desired amount of time. This will ensure proper
clockwise) to the desired amount of time. This timer operation. See Fig. 1-1.
will ensure proper timer operation. See Fig. 1-1.
1
/2" NPT piping (both ends).
Rated up to 100,000 BTUs /
Max temperature 125°F
Gas fl ow direction
(to grill)
Gas supply
side
Turn past 20 minutes
to activate
Time settings: 20-60 minutes
L-C2-362
Timer setting mark
(shown here in OFF)
Grill side
Fig. 1-1
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
REV 1- 1411100710
L-C2-362
Loading...