Firefly OL3461 Instruction Manual

Instruction Manual

Electric Patio Heater

Model:OL3461

Please read these instructions carefully before using

your new halogen heater

Unpack the halogen heater making sure that all the items are
present and that there are no components left in the box and
that the heater head is free from any packing material.

Using the detailed drawing follow the steps to assemble your
halogen heater.

Do not connect the halogen heater to the electrical supply
until all the assembly is complete.

Do not connect the halogen heater to the electrical supply if
any of the components or the power cord is damaged in any
way.

Assembling Process

Step 1: Fix the Tube to the base using 3pcs M6*50 bolts.

Step 2: Place the Decoration Cover onto the Tube.

Step 3: Feed the Power Cord through the Base and the Tube。
Step 4: Push the Heater Head onto the Tube and fix in position using the
M4*8mm screws.

Step 5: Fix the Power Cord on the Base by using 4*15mm screws.

Complete!

Caution

Only use the halogen heater on a firm solid horizontal area where all
the feet on the base are in contact with the floor. (Should the heater be
tilted or fall over the auto cut off switch will activate)

1. Site the heater outside or in a large open area and well away

from any obstructions such as branches or where the heater is
near any objects that can be effected by heat, such as furniture,
curtains or other inflammable objects (minimum distance 1
metre).

2. Do not use this heater in the immediate surroundings of a bath,

a shower or a swimming pool.

3. Do not use in unventilated areas

4. Do not use where gas, petrol, paint or other inflammable

goods are stored.

5. Do not push any items through, obstruct or cover the grill of

the heater head.

6. Do not position immediately above or below an electrical

socket.