1
User Manual for Firefly Microscope GT200 Version: 1.0
GT200
DIGITAL MICROSCOPE
User Manual
THANKS FOR SELECTING A FIREFLY MICROSCOPE
To take full advantage of this product’s advanced capabilities,
and to properly and safely use this product, please read the manual carefully.
2
User Manual for Firefly Microscope GT200 Version: 1.0
Copyright 2011 by Firefly Global.
or
duplicate,
in any form, this manual or any part
All
Global (www.fireflyglobal.com).
Firefly
the
Global
product,
assumes
no
responsibility
that may result from failure to use this
instructions, cautions, warnings,
Software
The
provisions
of the
product
reverse-engineered, d
This
ownership
in this
software
product
is
protected
applicable
is copyright of
by U.S. and i nte rn atio na l copyright la
worldwide.
Under such laws,
software incorporated with this
in which it is
is not a sale of
of
the
embe
i
sassem
the
software
software
dded. The
bled or
remain with Firefly and/or its ven
Caution:
Changes
purchaser’s authority to
or
modifications not
operate
rights are
reserved.
thereof
for any injury, or for any
or
indicati
Firefly
ons
for u s e
Global and its
the
instrument
software
may not be
otherwise reduced
or any copy of th e
expressly approved
the equi
pment and its warranty.
No one is
with
out
product
in
published in this
vendors.
ws
licensee
as
intended
is
copied,
to
human-perceivable
software;
dors.
by Firefly Global
permitted to
permission
illegal or
impr
accordance
manual.
All
rights
and
entitled
in the
are
international
to
use
operation
decompiled,
all
rights, title, a n d
reproduce
from Firefly
oper
use of
with the
reserved.
treaty
the copy
of the
form.
will
void t he
3
User Manual for Firefly Microscope GT200 Version: 1.0
TABLE OF CONTENTS
Table of Contents.......................................................................................................3
Introduction ..............................................................................................................4
Warnings & Cautions.................................................................................................5
Warning ....................................................................................................................................5
Caution......................................................................................................................................5
Check List ..................................................................................................................7
Nomenclature............................................................................................................8
Operation...................................................................................................................8
Operation...................................................................................................................9
Setting up the software application： ..........................................................................................9
Connect to PC：......................................................................................................................... 9
Power the Device On： ..............................................................................................................9
recommended holding position:................................................................................................ 10
low ratio 10-100x:.................................................................................................................... 10
high ratio >100x:..................................................................................................................... 11
Focus： ................................................................................................................................... 11
Brightness Adjustment: ............................................................................................................ 12
Using Focus:............................................................................................................................ 12
Using the image capture control: .............................................................................................. 12
Standby and Remove device:.................................................................................................... 13
Launch the Software Application:.............................................................................................. 14
Viewing the Images: ................................................................................................................ 14
Video and Image Settings......................................................................................................... 14
Maintenance and service.........................................................................................16
Cleaning recommendation......................................................................................................... 16
Recycling
Service policy........................................................................................................................... 17
the system
components
............................................................................................. 16
Specifications ..........................................................................................................18
Limited Warranty
...................................................................................................19
Troubleshooting.......................................................................................................21
Frequently Asked Questions (FAQs): ......................................................................................... 21
4
User Manual for Firefly Microscope GT200 Version: 1.0
INTRODUCTION
The Firefly Microscope System consists of a digital Microscope and software application. Only a computer
equipped with a free USB port is needed to use the system.
The Firefly Microscope System is designed for effective operation under a variety of conditions and typical
video parameters are set at the factory. The software allows users to adjust most parameters including
Saturation, Hue, Brightness, Contrast and Sharpness for desired applications.
System Requirements
The Firefly Microscope System
operating system, a viewing screen, and a PC with an available USB 1.1 or 2.0 port.
Intended use
The Firefly Microscope System is intended to conveniently enable mobile inspection of objects.
requires a user PC system running Windows XP Service Pack 2 or later
User Profile
The Firefly Microscope System is intended for applications such as:
Art / Watches / Jewelry inspection and repairs
Electronic components inspection and repairs
Coin examination for collectors
Schools and Science Education
Medical examinations
Insect dissection and examination
Plant anatomy inspection
Skin test
Textile inspection
Industrial inspection
Print Check
5
User Manual for Firefly Microscope GT200 Version: 1.0
WARNINGS & CAUTIONS
Warning
Caution
Plea s e f amiliariz e all
information in this
throughout
A warning statement in this manual
corrected or discontinued immediately, could lead to injury, illness, or
not
death.
Do not use in the presence
This
service
This
This
obtained
are
A caution
corrected
quipment damage,
e
this manual.
product
to
authorized service personnel.
instrument
product generates
from the
not intended
statement
or
discontinued immediately
operating personnel
summary.
has no user serv
is not
software application FireflyPro. These
for m e dica l or other
in this manual identifies condition
or data
Specific
iden
of fl
amma
iceable/replaceable
intended to be used in the eye.
and re
loss.
cords
with the
warnings
tifies
a condit ion
ble anesthetics.
reference images
diagnostic pu rp o s e s.
, could lead to
general
and
cautions are also found
or
safety
or pr
actice
parts.
equipment
Please
from
reference images
practice,
which if
refer all
inputs
which
failure,
if
not
In
order to obtain
thoroughly read this manual.
Do not use the Firefly Microscope if
components
.
assistance
Do not attempt to
glutaraldehyde
gas disinfectant.
The s ig na l
devices
example,
devices
output
complying
IEC 60950), as
to the Firefly Microscope System
optimum performance and
y
ou
of the
system. Contact customer
disinfect
products, ethylene
(USB Port)
with IEC
the Firefly Microscope System using
connector
60601-1,
appropriate to
ensure patient safety,
notice any
oxide gas, steam or any other liquid or
is
intended
or other IEC
the device.
is not allowed. You
signs
service fo
of
for
con
standards
Conn
damage
r immediate
nection
(for
ecting
additional
are
to the
of only
6
User Manual for Firefly Microscope GT200 Version: 1.0
responsible for verifying that the system
system standard
the
IEC
60601-1-1.
complies
with the
requirements
of
This
product complies with
electromagnetic interference
equipment
th
is
device
or be affected by other
in close proximity to other equip
current requ
ired standards
and should not present problems
devices. As a precaution,
ment.
for
to other
avoid
using
Do not apply alcohol, chem
optical
assembly
will
icals,
damage
or
water to
internal
the lens. Any liquids
comp
onents.
entering
the
7
User Manual for Firefly Microscope GT200 Version: 1.0
CHECK LIST
Before starting, check that all the following items have been included with your product. If anything is
missing, contact your dealer.
Microscope x 1pc Tripod x 1 pc Tripod Adapter x 1 pc
Stand Holder x 1 pc Clip x 1pc
Software Application CD
8
User Manual for Firefly Microscope GT200 Version: 1.0
NOMENCLATURE
9
User Manual for Firefly Microscope GT200 Version: 1.0
OPERATION
To obtain a clear image, please grip the Firefly Microscope; remain still and avoid vibration as much as
possible during observation.
Setting up the software application：
Prior to us ing the Firefly Microscope for the fi
instructions
the
provided
with the installation CD.
rst time,
install the
Fi r e f l y P r o s o f t w a r e a p p l i c a t i o n fo llowing
Connect to PC：
Connect the Firefly Microscope to the
PC’s
USB port
Power the Device On：
Setting the switch to "ON/LED" will activate the device, and the red indicator will turn on.
*** The first time you open the device, Windows operating system will
automatically
system
not to move switch to the OFF position or pull out the USB connector
Please wait about 2 minutes to complete the driver installation)
is installing the drivers, DO NOT TURN OFF THE DEVICE - that is do
install the appropriate device driver, while the
… Please wait for about 2 minutes …
… Windows driver installation completed …
10
User Manual for Firefly Microscope GT200 Version: 1.0
Using the Firefly Microscope
System:
recommended holding position:
It is suggested to hold the microscope, transparent cover forward, with the thumb held on
equipment. This holding position offers relative stability and allows lens control. The index finger is
the
free to rotate and adjust the focus wheel (as shown).
still
low ratio 10-100x:
The digital microscope is placed in the "Base". The open viewing
area at the bottom of the base allows placement of samples under
the microscope for observation
.
View Area
11
User Manual for Firefly Microscope GT200 Version: 1.0
high ratio >100x:
When there is a need to zoom in more than 100 times, maintaining body stability becomes more paramount.
In such instances, a microscope stand is recommended. When a stand is not available, it is suggested that
the digital microscope focus wheel opening should be placed towards the user, and the transparent
cover vertically downward. This enables easy access to the focus wheel and a very stable position. A
smooth desktop may be used as an observation platform. (Shown below)
Device vertically downward (stable observation)
Focus：
Based on the relative height of the observed object, the focus wheel can be turned for a clear image.
a higher magnification is required, the focus wheel can be turned to the left (see below). If a larger
When
field of view is required, the microscope
can be moved farther away and the wheel turned to the right.
12
g
User Manual for Firefly Microscope GT200 Version: 1.0
Brightness Adjustment:
On left rear side of the microscope, a knob allows the user to
control the brightness of the LEDs:
Backward Turn: Decrease Brightness
Forward Turn: Increase Brightness
Using Focus:
Default Position: Match the scale 50 to arrow mark.
Free Focus:
Rotate wheel to fine
tune the ima
Using the image capture control:
Press and release
system will generate a shutter sound from the PC speaker as
confirmation.
the Capture
Captur e
button to capture image frames. The
e.
13
User Manual for Firefly Microscope GT200 Version: 1.0
Standby and Remove device:
To temporarily turn off or remove the device, slide the power button to the “OFF” position. The
device must also be turned off through the Windows operating system:
• On your Microsoft Windows Desktop, click My Computer in the
left pane. Double-click the USB Video Device (Wireless Digital
Microscope in Windows Vista and Windows 7).
After turning off the device through Windows above, the m can be unplugged from
the PC’s USB port. Using this sequence will avoid transient voltages from potentially
causing hardware damage.
14
User Manual for Firefly Microscope GT200 Version: 1.0
Launch the Software Application:
Double-click the FireflyView.exe icon on your
computer desktop:
Viewing the Images:
FireflyView software controls your Firefly Microscope. Th e Microscope communicates with the PC
through a USB cable. The user can configure the video properties, review live images, capture
images, record video clips and store them for further review.
The main features of FireflyView are shown below:
Icon Function Description
Record Video Start and stop video recording
Snapshot Press to capture snapshot images
Preview Press to freeze/unfreeze microscope image
Help Access detailed Users Guide information
Set Change video and image properties as shown below
15
User Manual for Firefly Microscope GT200 Version: 1.0
Video and Image Settings
Pressing the SET button will provide access to the following capabilities
16
User Manual for Firefly Microscope GT200 Version: 1.0
MAINTENANCE AND SERVICE
Cleaning recommendation
CAUTION Do not apply alcohol, chemicals, or water to the lens. Any
liquids entering the optical assembly will damage internal compo
Use a dry cloth to
clean the Di
gital
Fir e f l y Microscope
System
nents.
on a weekly basis
.
Recycling
the system
Within the EU
Do not
separate
Parliament
Electri
If
specific
Outside
When the
according
dispose of
collection as
and the
cal Equipment (W
this
product
disposal information
the EU
product
to national, state, and
components
this
product
specified by
Council of the
EEE).
is
contaminated,
contact Cust
and
its components
as
unsorted
Directive 2002/96/EC of the
European
this directive does
local
regulations
municipal
Union on Waste El
omer Service.
reach end of life, recycle the product
refuse. Submit for
not apply. For m o r e
.
European
ectronic and
17
User Manual for Firefly Microscope GT200 Version: 1.0
Service policy
All repairs on produc t s un de r wa r ran ty must
Unauthorized repairs will void
product repair shall exclusively
If
the
product fails
your Firefly reseller.
Before contacting your resel ler
are
not causing
Product name and model number and complete description of
Serial nu mber of your product (if applicable).
Complete name, address and phone number of your
For
out-of-warranty repairs or spare parts orders, a purchase order (or credit
For parts orders,
If your product requires warranty, extended warranty, or non-warranty repair service, please contact
your Firefly reseller. A customer service representative will assist you in troubleshooting the problem
and will make every effort to solve it over the phone, avoiding potential unnecessary returns. In case
a return cannot be avoided, the representative will record all necessary information and will provide a
Return Authorization number, as well as the appropriate shipping address. The Return Authorization
number must be obtained prior to any return.
to
function properly — or if you need assistance, service, or
the
problem. When calling, please
the
the
warranty. In addition, whether or not covered
be
performed by Firefly-
, try to duplicate
required spare or replacement part numbers.
be
performed or approved by Fi refly or it s authorized re sellers.
certifi
ed
service
the
problem and check all access ories
be
prepared
fac
ility.
personnel.
to
provide:
the problem.
under
spare
warranty, any
parts — contact
to
ensure
card) number.
that
they
If you have
It
is
are the responsibility of
to
return your product for service, follow
Disconnect all ho se s, cables, sensors, power cords, and ancillary products (as
packing, unless you suspect they are associated with
Wherever possible
Include
a
packing list and
recommended
use the
that
original shipping carton and packing
the Return Authorization number.
all returned goods
the
sender.
these
recommended packing
the problem.
materials.
be
insured. Claims for loss or damage
instructions:
appropriate) before
to the
product
18
User Manual for Firefly Microscope GT200 Version: 1.0
SPECIFICATIONS
Item Specification
Weight Approximately 100 g (0.22 lb)
Length: 13.0 cm (5.2 inches)
Dimensions (approximate)
Power USB 5VDC, 150mA
Height: 3.6 cm (1.5 inches)
Width: 4.0 cm (1.6 inches)
Protection against ingress of
water
Operating conditions
Temperature +10°C to +40° C (+50°F to +104°F)
Relative humidity 30% to 75% noncondensing
Altitude 700 to 1060 hPa
Shipping and storage conditions
Temperature -20°C to +49°C (-4°F to +120°F)
Relative humidity 95% noncondensing max.
Safety Compliance FCC, CE and RoHS compliant
Patent Patent Pending
IPXØ
19
User Manual for Firefly Microscope GT200 Version: 1.0
LIMITED W
Limited Hardware Warranty (through distributors & resellers)
FireFly Global hardware products purchased in the U.S. come with a 1-year limited hardware warranty. The warranty is extended
through Firefly Global authorized representatives and resellers. If you have a warranty claim, please contact the store,
distributor, or website through which the product was purchased.
What is covered by this limited hardware warranty?
This limited hardware warranty covers defects in materials and workmanship in your FireFly Global hardware products.
What is not covered by this limited hardware warranty?
This limited hardware warranty does not cover:
• Software, including the operating system and software added to or bundled with the FireFly Global hardware products
• Problems that result from:
• External causes such as accident, abuse, misuse, or problems with electrical power
• Servicing not authorized by FireFly Global
• Usage that is not in accordance with product instructions
• Failure to follow the product instructions
• Problems caused by using accessories, parts, or components not supplied by FireFly Global
• Products with missing or altered serial numbers
• Products for which FireFly Global or its distributors have not received payment
• Normal wear and tear
ARRANTY
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE (OR JURISDICTION TO JURISDICTION). FIREFLY GLOBAL'S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN
HARDWARE IS LIMITED TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS WARRANTY STATEMENT. ALL EXPRESS AND
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES AND CONDITIONS
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THE LIMITED
WARRANTY PERIOD REFLECTED ON YOUR PACKING SLIP OR INVOICE. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED,
WILL APPLY AFTER THE LIMITED WARRANTY PERIOD HAS EXPIRED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU.
WE DO NOT ACCEPT LIABILITY BEYOND THE REMEDIES PROVIDED FOR IN THIS LIMITED HARDWARE WARRANTY OR FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LIABILITY FOR THIRD- PARTY CLAIMS
AGAINST YOU FOR DAMAGES, FOR PRODUCTS NOT BEING AVAILABLE FOR USE, OR FOR LOST DATA OR LOST SOFTWARE. OUR
20
User Manual for Firefly Microscope GT200 Version: 1.0
LIABILITY WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT OF A CLAIM. THIS IS
THE MAXIMUM AMOUNT FOR WHICH WE ARE RESPONSIBLE.
How long does this limited hardware warranty last?
The limited hardware warranty on all FireFly Global products begins on the date of the packing slip, invoice, or receipt. The
warranty period is not extended if a warranted product or any parts are repaired or replaced. FireFly Global may change the
availability of limited hardware warranties, at its discretion, but any changes will not be retroactive.
What do I do if I need warranty service?
Before the warranty expires, please contact the store, distributor, or website through which the product was purchased.
What will FireFly Global do?
FireFly Global or its authorized representative or reseller will repair any FireFly Global hardware products returned that prove to be
defective in materials or workmanship. If FireFly Global or its authorized representativse are not able to repair the product, we will
replace it with a comparable product that is new or refurbished.
When you contact our authorized representatives or resellers via phone or email, they will issue a Return Material Authorization
Number for you to include with your return. You must return the products in their original or equivalent packaging, prepay
shipping charges, and insure the shipment or accept the risk if the product is lost or damaged in shipment. The repaired or
replacement products will be returned to you. The reseller or authorized representative will pay to ship the repaired or replaced
products to you if you use an address in the United States (excluding Puerto Rico and U.S. possessions and territories). Otherwise,
the product will be shipped to you freight collect.
If it is determined that the problem is not covered under this warranty, you will be notified and informed of service alternatives that
are available to you on a fee basis.
How will you fix my product?
We use new and refurbished parts made by various manufacturers in performing warranty repairs and in building replacement
parts and systems. Refurbished parts and systems are parts or systems that have been returned to FireFly Global, some of which
were never used by a customer. All parts and systems are inspected and tested for quality. Replacement parts and systems are
covered for the remaining period of the limited hardware warranty for the product you bought. FireFly Global owns all parts
removed from repaired products.
May I transfer the limited hardware warranty?
Limited hardware warranties are not transferable.
21
User Manual for Firefly Microscope GT200 Version: 1.0
TROUBLESHOOTING
Frequently Asked Questions (FAQs):
Q1. What do I do if my Firefly Microscope and FireflyPro software suddenly stops working?
Answer:
Shutdown the Firefly Microscope and disconnect the USB data cable from the computer.
a)
Close the FireflyPro software.
b)
Wait for one minute, reconnect the USB data cord to system and switch the Microscope on.
c)
Double-click the FireflyPro icon on desktop to launch the software application again.
d)
Q2. When using the first version of Vista (not Vista SP1), there is a black visible region that randomly
appears, what can I do to fix this?
Answer:
Please update Windows Vista through Microsoft update, or click Toolbar - "Set -" default” – “OK” to
refresh the display.
Q3. What do I do when my computer is woken-up from standby or hibernation and FireflyPro software
stops working?
Answer:
Please close and try restarting the software application again.
Q4. Why is there no image displayed on FireflyPro image windows?
Answer:
a. Please verify whether the device is connected properly
b. Please switch the Microscope device “OFF” and back to either “LED1” or “LED2”
Q5. The Microscope is connected to the PC, but why can it not be used?
Answer:
a. Make sure the FireflyPro software is installed completely and properly.
b. Please verify whether the device is connected properly
c. Make sure the compact receiver is connected to the PC’s USB port.
d. Please unplug the compact receiver and plug into the PC’s USB port again.
Q6. How do I uninstall the FireflyPro software?
Answer:
To uninstall, go to Start -> Settings -> Control Panel -> Programs and Features -> Uninstall
Q7. Why does the video stream appear like a mosaic and update slowly (or not smoothly)?
Answer:
a. Too many software programs may be running simultaneously and overloading the CPU, or the
physical memory has reached its saturation. Please close unnecessary programs. If video stream
doesn’t improve, please reboot the system in order to release previously used memory.
22
User Manual for Firefly Microscope GT200 Version: 1.0
b. Check whether the system is infected by a virus.
c. The PC may be too old to properly drive the video stream and does not meet the minimum standards
set forth in the instructions. Please use faster system.
Q8. What to do if the Firefly Pro software application crashes?
Answer:
If the system crashes, disconnect the USB data cable and switch off the Microscope. Re-boot the PC
and, after system reboot, reconnect the Microscope, switch on and restart the FireflyPro application.
Loading...