Finlux Z-255-AFPADI Operating Instructions Manual

DOCKING SYSTEM

DIGITAL MICRO HI-FI SYSTEM

OPERATING INSTRUCTIONS

MODEL: Z-255-AFPADi

WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.

The lightning flash and arrowhead within the triangle is a warning sign alerting you of "dangerous voltage" inside the product.

CAUTION

DO NOT EXPOSE TO DRIPPING

OR SPLASHING LIQUIDS!

NOTE: CAUTION SYMBOLS ARE PRINTED ON REAR OF UNIT.

PLEASE REFER TO INSTRUCTION MANUAL.

E-2

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LASER DE CLASSE LASER DI PRIMA CLASSE KLASSE 1 LASER LASER PRIMERA CLASE LASER CLASSE 1 KLASSE 1 LASER PRODUKT

CAUTION:

VORSICHT:

VARNING:

ADVARSEL:

ATTNENZIONE:

ACHTUNG: AVISO:

INVISIBLE LASER RADIATION WHEN OPEN AND

INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.

UNSICHTBARE LASERSTRAHLUNG TRITT AUS, WENN DECKEL GEÖFFNET UND WENN SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT IST. NICHT DEM STRAHL AUSSETZENI.

OSYNLIG LASERSTRÁLNING NÄR DENNA DEL ÄR ÖPPNAD OCH

SPÄRR ÄR URKOPPLAND. STRÁLEN ÄR FARLIG.

USYNLIG LASERSTRÁLING VED ÁBNING. NÁR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÁ UDS/ETTELSE FOR STRÁLING.

RADIONS LASER INVISIDILE. NON GUARDARE

DIRETTAMENTE NELLA SORGENTE DEL LASER.

LASERLINSE NICHT BERÜHREN UNSICHTBARER LASERSTRAHL.

A LENTE NUNCA DEVE SER TOCADA.

PLEASE NOTE:

YOU WILL FIND THE RATING LABEL FOR THIS PRODUCT LOCATED ON THE BOTTOM OF THE UNIT.

CAUTION: GROUNDING OR POLARIZATION. THE PRECAUTIONS

SHOULD BE TAKEN SO THAT THE WIDER BLADE OF THE AC PLUG MUST MATCH THE SLOT IN RECEPTACLE "WALL SOCKET".

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS.

THE MAINS PLUG IS USED AS THE DISCONNECT DEVICE AND IT SHALL REMAIN READILY OPERABLE. TO COMPLETELY DISCONNECT THE POWER INPUT, THE MAINS PLUG OF THE APPARATUS MUST BE DISCONNECTED FROM THE MAINS COMPLETELY. THE MAINS PLUG SHOULD NOT BE OBSTRUCTED OR SHOULD BE EASILYACCESSED DURING INTENDED USE.

REMOTE

CONTROL

PLL

DIGITAL

TUNER

CLOCK

QUARTZ

DIGITAL

BLUE

BACKLIGHT

DISPLAY

MODEL Z-255-AFPADi ENGLISH MANUAL SIZE: 102(W) x 136(H)MM MATERIAL: 80G WOODFREE PAPER PRINTING COLOR: BLACK

E-3

LOCATION OF CONTROLS

1. CD DOOR

2. DOCKING DOOR

3. DOCKING ADAPTOR

4. SPEAKER (LEFT)

5. LCD DISPLAY

6. ON/ STANDBY KEY

7. BACK/ TUNE DOWN KEY

8. NEXT/ TUNE UP KEY

9. STOP/ CLOCK SET KEY

10. PLAY/ PAUSE/ FM MODE KEY

11. FUNCTION KEY

12. VOLUME DOWN (-)/ MEM - KEY

13. VOLUME UP (+)/ MEM + KEY

14. REMOTE CONTROL SENSOR

15. SPEAKER (RIGHT)

16. FM ANTENNA

17. VIDEO OUT SOCKET

18. SPEAKER OUTPUT SOCKET (LEFT & RIGHT)

19. AUX IN SOCKET

20. DC JACK SOCKET

E-4

POWER SUPPLY

PREPARATION OF REMOTE CONTROL

- REMOVE (GENTLY PULL OUT) THE PLASTIC "TAB" FROM THE BATTERY COMPARTMENTAT THE REAR OF THE REMOTE CONTROL.

- TEST THE REMOTE CONTROL BY PRESSING THE ON/ STANDBY KEY TO CHECK THAT THE UNIT SWITCHES ON PROPERLY USING THE REMOTE CONTROL.

THE REMOTE CONTROL UNIT CAN BE FOUND THE BATTERY COMPARTMENT UNDER THE UNIT.

REMOTE CONTROL:

1. ON/ STANDBY KEY

2. EQ KEY

3. FUNCTION KEY

4. BACK/ TUNE DOWN KEY

5. PLAY/ PAUSE/FM MODE KEY

6. NEXT/ TUNE UP KEY

7. REPEAT/ SLEEP KEY

8. STOP/ CLOCK SET KEY

9. VOLUME + / MEM + KEY

10. SNOOZE/ TIMER KEY

11. MEM/ PROG. KEY

12. VOLUME - / MEM - KEY

13. BATTERY COMPARTMENT

WHEN THE POWER IS THE ENTIRE DIGITAL DISPLAY WILL LIGHT UP WITH A BACK-LIGHT. THIS INDICATES THE HI-FI IS SWITCHED .

"ON"

"BLUE" "ON"

IMPORTANT : HOW TO TELL IF POWER IS "ON" ?

AC OPERATION (EXTERNAL AC-DC POWER ADAPTOR)

- THIS SET IS EQUIPPED WITH A "DC-JACK" CAPABLE OF ACCEPTING AC-ADAPTORS WITH A RATING OF DC = 7V, 2.5A,AND WITH A PLUG WITH THE FOLLOWING POLARITIES AS SHOWN (CENTER POSITIVE) :

- PLEASE USE ONLY THE SUPPLIEDAC-ADAPTOR TO OPERATE THE UNIT. USE OF OTHER ADAPTORS MAYDAMAGE THE UNIT OR CAUSE IT TO MALFUNCTION.

- PLUG THE TAIL END OFTHE AC-ADAPTOR INTO THE DC-JACK (SOCKET) ON THE UNDERNEATH OF THE MAIN UNIT.

- MAKE SURE THE VOLTAGE OF THE AC ADAPTOR OPERATES ATTHE SAME VOLTAGE AS YOUR LOCAL HOUSEHOLD VOLTAGE.

- INSERT THE PLUG AT THE END OF THE POWER CORD INTO THE WALLAC SOCKET.

- PRESS THE "ON/ STANDBY" KEY TO SWITCH ONTHE UNIT.

- THIS UNIT IS DESIGNED TO OPERATE WITHOUTEVER BEING TOTALLY POWERED "OFF". IT WILL EITHER BE "ON" OR IN "STANDBY MODE".

- IN STANDBY MODE, THE BLUE BACK-LIGHT OF THE DIGITAL DISPLAYWILL BE DIMMED BUT THE DISPLAY WILLSHOW THE CURRENT TIME (CLOCK FUNCTION).

- ANYTIME DURING STANDBY MODE,YOU CAN SWITCH "ON" THE UNIT BY PRESSING THE "ON/ STANDBY" KEY (ON REMOTE CONTROL OR FRONT PANEL OF THE MAIN UNIT).

- SAVE ENERGY BY SWITCHING THE SYSTEM TO "STANDBY" MODE.

789

11 121314

18 19

CONNECTION OF SPEAKER BOXES

- UNWRAP THE SPEAKER-CORDS OF BOTH SPEAKER-BOXES AND INSERT THE LEFT/RIGHT PLUGS INTO SOCKETS IN THE REAR OF MAIN UNIT.

- PLACE THE SPEAKER BOXES AS FARAPART AS POSSIBLE FOR BEST SOUND EFFECT.

E-6

DIGITAL CLOCK FUNCTION

- THE SET HAS A BUILT-IN DIGITAL CLOCK, WHICH IS DISPLAYED WHEN THE SET IS IN "STANDBY MODE". (THE DISPLAY WILL CONTINUOUSLY SHOW THE CURRENT TIME). IN THIS SITUATION THE BLUE BACKLIGHT IS NORMALLY DIMMED (TO SAVE ELECTRICITY).

HOW TO SET CORRECT TIME:

E-5

*NOTE: THAT WHEN THE DIGITAL CLOCK IS NOT SET, THE DIGITAL CLOCK DISPLAY SHALL CONTINUOUSLY FLASH TO INDICATE THAT THE CORRECTTIME HAS NOT YET BEEN SET.

SWITCH UNIT TO "STAND-BY" MODE

PRESS & HOLD FOR 3 SECONDS DISPLAY SHOWS HOUR OR HOUR (FLASHING)

CLOCK SET

PRESS TO SELECT 12-HOUR OR 24-HOUR CLOCK DISPLAY SYSTEM & PRESS TO CONFIRM YOUR SELECTION

CLOCK SET

PRESS REPEATEDLYTO SET THE CORRECT IN THE DISPLAY & PRESS TO CONFIRMHOUR

CLOCK SET

PRESS REPEATEDLY TO SET THE CORRECT IN THE DISPLAY & PRESS TO CONFIRMMINUTE

CLOCK SET

CORRECT TIME IS NOW SET & WILL BE SHOWN IN THE DISPLAY!

OR TUNE DOWN

TUNE UP

OR TUNE DOWN

TUNE UP

OR TUNE DOWN

TUNE UP

MINS80MINS70MINS60MINS50MINS

OFF*

MINS30MINS20MINS10MINS

- THIS SET HAS A SPECIAL SLEEP TIMER FUNCTION WHICH CAN AUTOMATICALLY SWITCH OFF THE UNIT. THIS IS USEFUL FOR SLEEPING TO MUSIC AT NIGHT.

- ATANY TIME WHILE THE UNIT IS OPERATING, PRESS & HOLD THE SLEEP KEY UNTIL THE “ZZZ” ICON & “SLEEP _ _ ” TEXT ARE DISPLAYED. PRESS KEY (ON REMOTE CONTROL) REPEATEDLY TO CHOOSE THE AUTOMATIC POWER OFF TIME.

(*OFF MEANS SLEEP TIMER IS DEACTIVATED)

SLEEP

AUTOMATIC POWER OFF SLEEP FUNCTION

AUTOMATIC POWER ON/OFF TIMER FUNCTION

HOW TO SET TIMER

- THIS SET HASA TIMER FUNCTION TO ENABLE YOUTO PROGRAM THE UNIT TO AUTOMATICALLY SWITCH ON OR OFF AT PRESET TIMES. THIS IS USEFULAS A MORNING ALARM CLOCK :

"" " "

1. ON “STANDBY” MODE, PRESS AND HOLD TIMER KEY (ONREMOTE CONTROL). THE

“TIMER ON” SYMBOLAPPEARS IN THE DISPLAY.

2. PRESS TO ADJUST THE HOUR OF THE DESIRED "ON"

TIME AND THEN PRESS TIMER KEY TO CONFIRM.

3. PRESS TO ADJUST THE MINUTES OF THE DESIRED

"ON" TIME ANDTHEN PRESS TIMER TO CONFIRM.

4. NOW THE WORDING INTHE DISPLAY CHANGES TO SHOW .

5. PRESS TO ADJUST THE HOUR OF THE

DESIRED "OFF" TIME AND THEN PRESS TIMER TO CONFIRM.

6. PRESS TO ADJUST THE MINUTES OF THE DESIRED

"OFF" TIME ANDTHEN PRESS TIMER TO CONFIRM.

7. NOW THE DISPLAY WILL INDICATE THE "WAKE UPMODE" (iPod/ iPhone/ iPad, RADIO or CD).

PRESS TO CHOOSE THE DESIRED MODE& PRESS TIMER TO CONFIRM.

8. THE DISPLAYTHEN SHOWS THE "WAKE UP VOLUME LEVEL" (LOUDNESS).

PRESS TO DECREASE OR INCREASE THE VOLUME LEVEL TO BE USED FOR THE MUSIC TO BE PLAYED WHEN THE TIMER SWITCHES ON THE UNIT AT THE PRE-SETTIME.

9. PRESS TIMER TO CONFIRM.

TUNE UP OR TUNE DOWN

"TIMER OFF"

TUNE UP OR TUNE DOWN KEYS

TUNE UP OR TUNE DOWN

TUNE UP

TUNE UP OR TUNE DOWN

(NOTE : THE AUTOMATIC ON/OFFTIMER WILL SWITCH ON THE UNIT AS IF YOU HAVE MANUALLY PRESSEDTHE "ON/ STANDBY KEY. IF YOU HAVE SELECTED "WAKE TO RADIO", THE EXACT PRESET RADIO BAND& STATION WILL BECOMEACTIVATED WHEN POWER SWITCHES ON).

10. FINALLYTHE UNIT WILL RETURN TO THE NORMALDISPLAY, EXCEPT THAT THE

SYMBOL WILL BE SHOWN, TO INDICATE THATYOU HAVE PROGRAMMED A ON/OFF

ALARM SETTING.

11. IN CASEYOU WISH TO DISABLE THE TIMER, PRESS THE TIMER KEY ONCE,

& THE SYMBOLWILL DISAPPEARS.

+ 4 hidden pages

Finlux Z-255-AFPADI Operating Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual