Finlux 55UT3EC320S-T User Manual
55 inch LED TV
55UT3EC320S-T
Owner’s manual
www.finlux.co.uk
50296202
Contents
Safety Information .................................................. 2
Getting Started ....................................................... 3
Notications & Features & Accessories .................. 3
Specication ........................................................... 5
Remote Control ...................................................... 6
Connections............................................................ 7
First Time Installation - USB Connections .............. 8
TV Menu Features and Functions .........................11
General TV Operation .......................................... 14
Using the 3D Mode ............................................... 14
3D Bluetooth Active Shutter Glasses.................... 17
Connectivity Functions ......................................... 19
Wireless Display .................................................. 21
Using DLNA Network Service ............................... 21
Internet Portal ....................................................... 22
iPlayer Application ................................................ 23
Internet Browser ................................................... 24
Software Upgrade................................................. 25
Troubleshooting & Tips ......................................... 25
Nero MediaHome Installation ............................... 26
PC Input Typical Display Modes .......................... 27
AV and HDMI Signal Compatibility ....................... 27
Supported File Formats for USB Mode ................ 28
Supported DVI Resolutions .................................. 29
Important Instructions ........................................... 30
English - 1 -
Safety Information
If there is lightning or storms, or if the TV is not
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
Don’t operate your TV in extreme ambient
conditions as this may cause damage to your TV.
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Note : Follow the on screen instructions for operating the
related features.
going to be used for a while (e.g. if going away
on holiday), disconnect the TV set from the
mains. The mains plug is used to disconnect
TV set from the mains and therefore it must
remain readily operable.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
IMPORTANT - Please read these instructions fully before installing or operating
WARNING: Never let people (including
children) with reduced physical, sensory or
mental capabilities or lack of experience and / or
knowledge use electrical devices unsupervised.
• For ventilation purposes, leave a free space of at
least 10 cm all around the set.
•Do not block ventilation holes.
•Do not place the TV on sloping or unstable surfaces,
the TV may tip over.
• Use this device in moderate climates.
• The power cord plug should be easily accessible. Do
not place the TV, furniture, etc. on the power cord.
A damaged power cord/plug can cause re or give
you an electric shock. Handle the power cord by the
plug, do not unplug the TV by pulling the power cord.
Never touch the power cord/plug with wet hands
as this could cause a short circuit or electric shock.
Never make a knot in the power cord or tie it with
other cords. When damaged it must be replaced,
this should only be done by qualied personnel.
•Do not use this TV in a humid or damp place. Do
not expose the TV to liquids. If any liquid falls into
the cabinet unplug the TV and have it checked by
qualied personnel before operating it any further.
•Do not expose the TV to direct sunlight or other
heat sources.
• The TV should not be placed near to open
ames or sources of intense heat such as
an electric heater.
• Excessive sound pressure from earphones
and headphones can cause hearing loss.
• Ensure that no open ame sources, such as
lit candles, are placed on top of the TV.
• To prevent injury, this TV must be securely
attached to the wall in accordance with the
installation instructions (if the option is available).
• Occasionally, a few non-active pixels may appear
on the screen as a xed blue, green or red point.
Please note that this does not affect the performance
of your product. Take care not to scratch the screen
with ngernails or other hard objects.
• Before cleaning, unplug the TV from the wall socket.
Only use a soft, dry cloth while cleaning.
Warning
Risk of electric shock
Caution
Important
Notice
Serious injury or death risk
Dangerous voltage risk
Injury or property damage risk
Operating the system correctly
Additional notes marked
English - 2 -
Getting Started
Notications&Features&Accessories
Environmental Information
This television is designed to consume less energy
to help save the environment. To reduce energy
consumption, you should take the following steps:
You can use the Power Save Mode setting, located
in the Picture menu. If you set the Power Save Mode
as Eco, the TV will switch to energy-saving mode
and the luminance level of TV set will be decreased
to the optimum level. Note that some picture settings
will be unavailable to be changed when the TV is in
Power Save Mode.
If Picture Off is selected, “Screen will be off in
15 seconds.” message will be displayed. Select
PROCEED and press OK to continue. The screen
will be off immediately.
When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.
StandbyNotications
If the TV does not receive any input signal (e.g. from
an aerial or HDMI source) for 5 minutes, it will go
into standby. When you next switch-on, the following
message will be displayed: “TV switched to stand-by
mode automatically because there was no signal
for a long time.” Press OK to continue.
The Auto TV OFF option(in Settings>Other Settings
menu) is set to Off by default. If this setting is changed
and the TV has been left on and not been operated
during the set time, it will switch into standby mode
after the set time has expired. When you next switchon, the following message will be displayed. “TV
switched to stand-by mode automatically because
no operation was made for a long time.” Press OK
to continue.
Features
• TV supports Ultra HD (Ultra High Denition - also
known as 4K) which provides resolution of 3840 x
2160 (4K:2K). It equals 4 times the resolution of Full
HD TV by doubling the pixel count of the Full HD TV
both horizontally and vertically. Ultra HD resolutions
are supported from HDMI inputs of the TV.
• Supports the viewing of 3D content from devices
such as a High Denition Satellite Receiver or Bluray Player via HDMI
• Remote controlled colour TV.
• Fully integrated digital TV(DVB-T2)
• HDMI inputs are for connecting a device that has
a HDMI socket.
• USB input.
English - 3 -
• Programme recording.
• Programme timeshifting.
• OSD menu system.
• Scart socket for external devices (such as DVD
Players, PVR, video games, etc.)
• Stereo sound system.
• Teletext.
• Headphone connection.
• Automatic programming system.
• Manual tuning.
• Automatic power down after up to six hours.
• Sleep timer.
• Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP, Vista,
Windows 7, 8 and 10
• Game Mode (Optional).
• Ethernet (LAN) for Internet connectivity and service
• 802.11n built in WIFI Support.
• DLNA
• Bluetooth support
• 100Hz frequency scan.
Accessories Included
Remote Control
Batteries: 2 x AAA
Instruction Book
Quick Start Guide
Side AV Connection Cable
Mini scart adapter cable
3D Glasses X 2
TVControlButtons&Operation
1. Standby On/Off button
2. TV/AV button
3. Programme Up/Down buttons
4. Volume Up/Down buttons
Operation with the Buttons on the
TV
Press button to decrease volume or
button to increase volume. Press P/
CH + button to select the next programme
or P/CH - button to select the previous
programme.
Press the or button at the same
time to view main menu. In the Main menu
select sub-menu using TV/AV button and set the
sub-menu using or buttons. To see what
options are available via the menu, refer to the menu
system section of this manual. Press the TV/AV button
in the control panel on the TV to switch between AV modes.
Note: Function indications of the buttons will be
displayed on the screen when pressed.
Inserting the Batteries into the Remote
Lift the cover on the back of the remote upward
gently. Install two AAA batteries. Make sure to
match the + and - ends of the batteries in the
battery compartment (observe the correct polarity)
Replace the cover.
Connect Power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.
Antenna Connection
Connect the aerial TV plug to AERIAL INPUT (ANTTV) socket located on the rear bottom side of the TV.
Rear bottom side of the TV:
Notication
Manufactured under license from Dolby Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
“HDMI, the HDMI logo and High-Denition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.”
“DLNA®©, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certication marks of
the Digital Living Network Alliance.”
“YouTube and the YouTube logo are trademarks of
Google Inc.”
English - 4 -
Information for Users on Disposal of Old
Equipment and Batteries
[European Union only]
These symbols indicate that equipment with these
symbols should not be disposed of as general
household waste. If you want to dispose of the
product or battery, please consider the collection
systems or facilities for appropriate recycling.
Notice: The sign Pb below the symbol for batteries indicates
that this battery contains lead.
Battery
Products
Specication
TV Broadcasting PAL B/G D/K K
Receiving Channels VHF (BAND I/III) - UHF
Number of Preset
Channels
Channel Indicator On Screen Display
RF Aerial Input 75 Ohm (unbalanced)
Operating Voltage 220-240V AC, 50Hz.
Audio Output Power
(WRMS.) (10% THD)
(BAND U) - HYPERBAND
1000
2x12,5W
Digital Teletext
Press TXT ( ) button to view digital teletext
information. Operate it with the coloured buttons, cursor
buttons and the OK button. The operation method may
differ depending on the contents of the digital teletext.
Follow the instructions displayed on the digital teletext
screen. When the TXT ( ) button is pressed again, the
TV returns to television broadcast.
Power Consumption 225 W
TV Dimensions DxLxH
(with foot)
TV Dimensions DxLxH
(without foot)
Display 55”
Display Resolution 3840 x 2160
Operation temperature
and operation
humidity:
Vesa M6 400 x 400
243 x 1232 x 768
99/106 x 1232 x 713
0ºC up to 40ºC, 85% humidity
max
English - 5 -
Getting Started
4
7
8
9
0
1
.,/@
2
3
5
6
OK
Q.MENU
EXIT
BACK
LANG.
2
1
SOURCE
/
/
P+
P-
V+
V-
Remote Control
(*) MY BUTTON 1:
This button’s main function is to run Youtube link.
However, if you want to change this function, you
can press MY BUTTON 1 for ve seconds when on
a desired source or channel, until the “MY BUTTON
IS SET” message is displayed on the screen. This
conrms that the selected MY BUTTON
is now associated with the selected function. Note that
if you perform rst time installation, MY BUTTON 1
will return to its default function.
(*) MY BUTTON 2:
Press MY BUTTON 2 for ve seconds when on a
desired source or channel, until the “MY BUTTON
IS SET” message is displayed on the screen. This
confirms that the selected MY BUTTON is now
associated with the selected function.
1. Source
2. Launches Netix Application
3. Internet Portal
4. Play ( in media browser mode )
5. Programme recording
6. Rapid reverse ( in media browser mode )
7. Mono/Stereo - Dual I-II / Current language (in
DVB channels)
8. Green button
9. Red button
10. Numeric buttons
11. Channel List/TV source
12. Menu
13. Volume up / down
14. Back (Return) / Index (in TXT mode)
15. Favourite channel list
16. Expand (in TXT mode) / Screen size
17. My button 1 / Youtube (*)
18. My button 2 (**)
19. Teletext / Mix
20. Electronic programme guide
21. Mute
22. Info / Reveal (in TXT mode)
23. Exit
24. Ok / Select / Hold (in TXT mode)
25. Programme up / down
26. Navigation buttons
27. Quick menu
28. Previous programme
29. Blue button
30. Yellow button
31. Subtitle on / off
32. Rapid advance ( in media browser mode )
33. Stop ( in media browser mode )
34. Pause (in media browser mode) / Timeshift
recording
35. Media browser
36. Launches Youtube
37. Standby button
38. Function LED
English - 6 -
Getting Started
Connections
Connector Type Cables Device
Mini Scart
Connection
(rear bottom)
VGA
Connection
(back)
PC/YPbPr
Audio
Connection
(back)
HDMI
Connection
(rear bottom
&side)
S/PDIF
(Optical Out)
(rear bottom)
Side AV
(Audio/Video)
Connection
(side)
Headphone
Connection
(side)
Mini Scart adapter cable
(supplied)
YPbPr or PC Connection Cable
(not supplied)
(Back)
Side AV Cable
(supplied)
NOTE: When connecting
a device via the YPbPr or
Side AV input, you must
use a connection cables
to enable connection. See
the illustrations above. |
To enable PC audio, you
will need to use the SIDE
AV CONNECTION cable’s
WHITE & RED inputs. | If an
external device is connected
via the SCART socket, the TV
will automatically switch to AV
mode.| When receiving DTV
channels (Mpeg4 H.264) or
while in Media Browser mode,
output will not be available
via the scart socket. | When
using the wall mounting kit
(optional), we recommend
that you plug all your cables
into the back of the TV before
mounting on the wall. | Insert
or remove the CI module only
when the TV is SWITCHED
OFF. You should refer to the
module instruction manual
for details of the settings.
| Each USB input of your TV
supports devices up to 500mA.
Connecting devices that have
current value above 500mA may
damage your TV.
HDMI 1 ARC (Audio Return Channel)
YPbPr
Connection
(back)
USB
Connection
(side)
CI
Connection
(side)
Subwoofer
Connection
(back)
(*) For external subwoofer connection
YPbPr Connection
(Cable not supplied)
English - 7 -
CAM
module
Getting Started
First Time Installation - USB Connections
Switching On/Off TV
Connect the power cord to the 220-240V AC, 50 Hz.
To Switch the TV On
Press the “ ” button, P+ / P- or a numeric button on
the remote control.
To Switch the TV Off
Press the “ ” button on the remote control or press
the “ ” push button on the TV. The TV will now switch
to standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode, the standby
LED can blink to indicate that features such as Standby Search,
Over Air Download or Timer is active. The LED can also blink
when you switch on the TV from standby mode.
First Time Installation
Plug aerial cable into the ANT socket on your TV.
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press OK.
The First Time Installation (FTI) screen will be
displayed next. Set your preferences using the
navigation buttons and when nished, press OK to
continue.
You can activate Store mode option to be available
in “Other settings” menu and your TV’s settings will
be optimized for best display quality. A conrmation
screen will be displayed. Select YES to proceed.
If Home Mode is selected, Store mode will not be
available after the First Time Installation. Press OK
button to continue.
NOTE: You can press MENU button to cancel.
After all the available stations are stored, the Channel
List will be displayed on the screen. If you like how the
channels are sorted according to the LCN (*), please
select “Yes” and than press OK.
Press MENU button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence (if available).
Media Playback via USB Input
You can connect a 2.5” and 3.5” inch (hdd with external
power supply) external hard disk drives or USB memory
stick to your TV by using the USB inputs of the TV.
IMPORTANT! Back up your les before making
any connections to the TV. The Manufacturer will
not be responsible for any le damage or data loss.
Certain types of USB devices (e.g. MP3 Players)
or USB hard disk drives/memory sticks may not be
compatible with this TV. The TV supports FAT32
and NTFS disk formatting but recording will not be
available with NTFS formatted disks.
While formatting a USB hard disk that has 1TB (Tera
Byte) or more le capacity, you can experience
problems with the formatting process.
Quickly plugging and unplugging USB devices, is a
very hazardous operation. This may cause physical
damage to the USB port and the USB device itself.
Do not pull out the USB module while playing a le.
You can use USB hubs with your TV’s USB inputs.
External power supplied USB hubs are recommended
in such a case.
It is recommended to use the TV’s USB input(s)
directly, if you are going to connect a USB hard disk.
Recording a Programme
IMPORTANT: When using a new USB hard disk drive,
it is recommended that you rst format the disk using
your TV’s “Format Disk” option.
Note: To record a programme, you should rst connect
a USB disk to your TV while the TV is switched off.
You should then switch on the TV to enable the
recording feature.
To use the recording function, you need to connect
a USB disk or an external hard disk drive to the TV
and the connected USB disk should have at least 1
GB capacity and should have 2.0 speed compatibility.
If the connected USB device does not support 2.0
speed, an error message will be displayed.
Note: Recorded programmes are saved into the
connected USB disk. If desired, you can store/copy
recordings onto a computer; however, these les will
not be available to be played on a computer. You can
play the recordings only via your TV.
Note: Lip Sync delay may occur during the timeshifting.
Radio record is supported. The TV can record
programmes up to ten hours.
Recorded programmes are split into 4GB partitions.
If the writing speed of the connected USB disk is not
sufcient, the recording may fail and the timeshifting
feature may not be available.
English - 8 -
Loading...