Finish Thompson S6 User Manual

S Series Motors

Model S6

*

Operation & Parts Manual

For EF Series Pump Tubes Only

*

Patent pending.

W

EU Declaration of Conformity

Finish Thompson Inc. hereby declares that the following electrical equipment fully complies with the
applicable health and safety requirements as specified be the EC directives listed. The product may
not be taken into service until it has been established that the driven Drum and Container Pump
complies with the provisions of all relevant EC Directives provided pumps manufactured by Finish
Thompson are used.

This declaration is valid provided that the devices are fully assembled and no modifications are
made to these devices.

Type of Device:

 Electric Motor for Driving Drum and Container Pumps

Model:

S6

EC Directives (and their applicable amendments):

Machinery Safety (2006/42/EC)

Electromagnetic Compatibility (2004/108/EC)

WEEE (2012/19/EU)

Batteries (2006/66/EU)

Specific standards applied:

EN ISO 12100-1 EN ISO 12100-2

EN 55014-1 EN 55014-2

EN 60529

EN 60745-1

Signed,

Casey D. Bowes

CEO and President

October 25, 2012

W

EU Declaration of Conformity

Finish Thompson Inc. hereby declares that the following electrical equipment fully complies with the
applicable health and safety requirements as specified be the EC directives listed. The product may
not be taken into service until it has been established that the driven Drum and Container Pump
complies with the provisions of all relevant EC Directives provided pumps manufactured by Finish
Thompson are used.

This declaration is valid provided that the devices are fully assembled and no modifications are
made to these devices.

Type of Device:

Battery Charger

Models:

S6 Li-Ion Charger, S6 Li-Ion Car Charger

EC Directives (and their applicable amendments):

Low Voltage (2006/95/EC)

Electromagnetic Compatibility (2004/108/EC)

WEEE (2012/19/EU)

Specific standards applied:

EN 60950
EN 55022

Signed,

Casey D. Bowes

CEO and President

October 25, 2012

Introduction

This manual pertains to the S6 rechargeable drum pump motor. Finish Thompson, Inc. thanks you for choosing our prod­ucts. We believe that the use of our products will be fully satisfactory. When properly installed and operated, your Finish
Thompson motor and pump will provide long, trouble-free service; therefore please read this manual carefully before car­rying out any operations on the pump-motor unit. Any use other than that described herein is considered incorrect and
consequently Finish Thompson, Inc. shall not be held responsible for any damages to people or things. In case of doubt
or enquiries, please apply to our technical service directly at the following address:

Finish Thompson, Inc.

921 Greengarden Rd.

Erie, PA 16501 U.S.A.

Tel. [phone]
Fax [phone]

www.finishthompson.com

fti@finishthompson.com

Index

Introduction ………………………………………………………………………….. 3

General Terms & Conditions, Warranty ………………………………………………… 4

Safety ……………………………………….………………………………………..5-7

Installation …………………………………………………………………………... 7

Motor Operation………................…….……………...………………………......……8

Charger Operation………....…….…........……………………………………......……8

Battery Pack Removal..………....…….……………………………….………......……9

Troubleshooting………....…….…........…………………………………....…......……9

Wall Hanger Instructions……....…….………………………………………..…......…10

Specifications & Identification .........…… ……………………………………………...11

Spare Parts ..…..……….……..………………………………..……………………...12

Warranty, General Terms & Conditions

1. The following terms and condition apply to the sale of machinery, components and related services and products, of Finish
Thompson, Inc. (hereinafter “the products”)

2. Finish Thompson, Inc. (the manufacturer) warrants only that:
a.) its products are free of defects in material, design and workmanship at the time of original purchase;

b.) its products will function in accordance with Finish Thompson, Inc. operation manuals; Finish Thompson, Inc.
does not guarantee that the product will meet the precise needs of the Customer, except for those purposes set out in
any invitation to render documents or other documents specifically made available to Finish Thompson, Inc. before
entering into this agreement;

c.) high quality materials are used in the construction of the pumps and that machining and assembly are carried out to
the highest standards. Except as expressly stated above, Finish Thompson, Inc. makes no warranties, express or
implied, concerning the products, including all warranties of fitness for a particular purpose.

This warranty shall not be applicable in circumstances other than defects in material, design, and workmanship. In particular

warranty shall not cover the following:

d.) Periodic checks, maintenance, repair and replacement of parts due to normal wear and tear;

e.) Damage to the product resulting from:
i. Tampering with, abuse or misuse, including but not limited to failure to use the product for its normal purposes
as stated at the time of purchase or in accordance with Finish Thompson, Inc. instructions for use and
maintenance of the product, or the installation or improper ventilation or use of the product in a manner
inconsistent with the technical or safety standard in force;

ii. Repairs performed by non-authorized service workshop, or opening of the unit by non-authorized personnel, or

use of non genuine Finish Thompson, Inc. parts;
iii. Accidents, force majeure or any cause beyond the control of Finish Thompson, Inc., including but not limited to

lightning, water, fire, earthquake, and public disturbances, etc.;

3. The warranty shall cover the replacement or repair of any part, which is documented to be faulty due to construction or
assembling, with new or repaired parts free of charge delivered by Finish Thompson, Inc. Parts subjected to normal wear and
tear shall not be covered by the warranty. Finish Thompson, Inc. shall decide as to whether the defective or faulty part shall be
replaced or repaired. Transportation charges are prepaid to Finish Thompson.

4. The warranty of the products shall be valid for a period of 12 months from the date of delivery, under the condition that notice of
the alleged defect to the products or parts thereof be given to Finish Thompson, Inc. within the term of 8 days from the discovery.

5. Repair or replacement under the terms of this warranty shall not give a right to an extension to, or a new commencement of, the
period of warranty. Repair or replacement under the terms of this warranty may be fulfilled with functionally equivalent
reconditioned units. Finish Thompson, Inc. qualified personnel shall be solely entitled to carry out repair or replacement of faulty
parts after careful examination of the motor. Faulty parts or components when replaced by Finish Thompson, Inc. will become the
property of Finish Thompson, Inc. If this warranty does not apply, the purchaser shall bear all cost for labor, material and
transportation.

6. Finish Thompson, Inc. will not be liable on any claim, whether in contact, tort, or otherwise, for any indirect, special, incidental, or
consequential damages, caused to the customer or to third parties, including loss of profits, process down time, transportation
costs, costs associated with replacement or substitution products, labor costs, installation or removal costs. In any and all events,
manufacturer’s liability shall not exceed the purchase price of the product and/or accessories.

7. Return Policy. Should you have any problems with this product, please contact the distributor in your area. The distributor will
determine if a return to the factory is necessary and will contact the factory for a Return Authorization Number. Otherwise,
contact our Technical Service Hotline [phone]) or email techservice@finishthompson.com if you have any questions

regarding product operation or repair.

4