Finelite HP-2 Installation Instructions Manual

HP-2 Wall Wash Arm Mount Installation Instructions

Overview

Stud

Step 5

Luminaire Closure

Page 7

Step 2

Assemble Arm to
Housing Brackets

Page 3

Step 1

Mounting Locations

Page 2

Step 3

Hang Luminaire and
Wire Connections

Page 4

Step 4

Joining Luminaires

Pages 5-6

© 2017 FINELITE, INC. ALL RIGHTS RESERVED. Form 98386. V2 11/17

Wall

Helpful Videos

0-10V Dimming

Patent Pending

Note: Starter/Independents only require 2 arm brackets up to 12-feet.

This is a hypothetical build to show the capabilities of this luminaire family and mount type. Your build may vary.

Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • [phone] • Fax: [phone] • www.finelite.com

CAUTION: All power connections to be installed to local/national codes by a Certified Electrician.

1 of 8

HP-2 Wall Wash Arm Mount Installation Instructions

Step 1 – Mounting Locations

A. Starter/Independent Mounting Locations

Starter/Independents only require 2 arm brackets up to 12-feet.

1/4" 1/4"

Endcap Endcap

1-1/8"

4-1/2"

Point A

B. Joiner/Ender Mounting Locations

1/4"

Luminaire*

Length

Junction Box

Feed Location

6" 6"

Luminaire*

Length

Starter

Wall Brackets

Luminaire*

Length

1/4"

Endcap

1-1/8"

4-1/2"

6"

Point A

Position luminaire on wall in desired location. Mark the bottom corner of the luminaire as Point A; DO NOT include endcap. Use Point A to mark feed
location and install junction box. Center of wall brackets is 6" from Point A. Make sure wall brackets have proper structurally secured backing (by others).

*Luminaire length not including endcap.

Patent Pending

Junction Box
Feed Location

Starter Joiner/Ender

Wall Brackets

6"

6"

6"

Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • [phone] • Fax: [phone] • www.finelite.com

CAUTION: All power connections to be installed to local/national codes by a Certified Electrician.

3/8"

© 2017 FINELITE, INC. ALL RIGHTS RESERVED. Form 98386. V2 11/17

2 of 8

HP-2 Wall Wash Arm Mount Installation Instructions

Step 2 - Assemble Arm to Housing Brackets

A. Install Wall Bracket

J-Box

Perspective View

Wall Bracket

B. Assemble Arm

Arm Assembly

Side View

Wall Bracket Cover

#10-32 x 5/8" Screws

(4) (provided)

Housing Bracket

Screws
(by others)

Level wall bracket to ensure proper mounting. Install screws or fasteners (by others)
appropriate for structure type through bracket and into structurally secured blocking.

Screws

(by others)

#10-32 x 5/8" Screws

(by others)

Electrical Wire

© 2017 FINELITE, INC. ALL RIGHTS RESERVED. Form 98386. V2 11/17

Perform this step for both arms on a flat surface. Slide arm attachment assembly into housing brackets. Ensure that wall bracket cover is away from the ends of the arm.
Pass electrical wire through the channel of the arm assembly. Install #10-32 x 5/8" screws (provided) to secure arm attachment assembly onto housing bracket.

¹ Preferred power feed location shown.
² Part by others but also available from Finelite upon request.

Patent Pending

Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • [phone] • Fax: [phone] • www.finelite.com

CAUTION: All power connections to be installed to local/national codes by a Certified Electrician.

3 of 8

HP-2 Wall Wash Arm Mount Installation Instructions

Step 3 - Hang Luminaire and Wire Connections

A. Hang Luminaire

Wall Bracket

Side View

Wall

Bottom
Hook

Arm Bracket

B. Connect Wires

C. Top Hook

Side View

Top Hook

B.

A.

Wall
Bracket

C. Secure Luminaire

Mounting
Magnets

Perspective View

#1/4-20 x 5/8"
Adjustment Screws
(provided)

Wall Bracket Cover

Wall Bracket
Cover

Let luminaire hang on the wall for wiring by hooking the arm bracket to engage bottom
hook onto the wall bracket.

#1/4-20 x 5/8"
Adjustment Screws

(provided)

Electrical
Connections

Arm Bracket,
Top Hook

A. Make electrical connections and push completed wiring into junction box. Install luminaire
onto wall by disengaging the bottom hook from the wall bracket. B. Rotate the arm assembly
perpendicular to the wall. C. Hook the arm bracket onto the wall bracket and engage the top
hook of the arm bracket.

© 2017 FINELITE, INC. ALL RIGHTS RESERVED. Form 98386. V2 11/17

Install #1/4-20 x 5/8" adjustment screws (provided) onto the arm brackets, engaging
the wall brackets. Use screws to level luminaire. Tighten to raise and loosen to lower.
Slide wall bracket cover along arm towards the wall until mounting magnets engage the
wall bracket cover to hold it in place. Turn power on to luminaire.

Patent Pending

Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • [phone] • Fax: [phone] • www.finelite.com

CAUTION: All power connections to be installed to local/national codes by a Certified Electrician.

4 of 8

HP-2 Wall Wash Arm Mount Installation Instructions

Step 4A - Joining Luminaires

A. Remove Diffuser

Side View

Wall

B. Hang Joiner/Ender C. Secure Joiner/Ender

Perspective View Side View

C. Top Hook

A. Bottom Hook

Starter

Wall

B.

Joiner/Ender

Wall Bracket Cover

Top Hook

Diffuser

Remove diffuser from starter and joiner/ender and set aside to prevent it from getting dirty
or damaged. We recommend using a thin, flat tool such as a putty knife.

Patent Pending

Let joiner/ender luminaire hang on the wall by hooking the arm bracket to engage bottom
hooks onto the wall bracket.

Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • [phone] • Fax: [phone] • www.finelite.com

CAUTION: All power connections to be installed to local/national codes by a Certified Electrician.

Joiner/Ender

A. Install luminaire onto wall by disengaging the bottom hook from the wall bracket.
B. Rotate the arm assembly perpendicular to the wall. C. Hook the arm bracket onto the wall

bracket, engaging the top hook of the arm bracket.

5 of 8

© 2017 FINELITE, INC. ALL RIGHTS RESERVED. Form 98386. V2 11/17

HP-2 Wall Wash Arm Mount Installation Instructions

Step 4B - Joining Luminaires

A. Remove Backplate

Right Perspective View

Backplate Assembly

#8-18 x 1/4"
Screw
(provided)

#8-18 x 1/4"
Screw
(provided)

B. Wire Connection

As luminaires are suspended perpendicular to the wall, connect plug-together wiring. Align starter
and joiner/ender luminaires together. Be careful not to damage any wiring.

C. Install Yoke Brackets

Perspective View

Starter

Plug-Together Wiring

Bottom-Up View

Joiner/Ender

Joiner/Ender

Starter

LED Harness

Unplug LED harness. Remove backplate(s) from starter and joiner/end by loosening (but not removing) only the two shown #8-18 x 1/4"
screws (one per side of the extrusion). There are two ground wire/safety straps that the backplate assemblies will hang from. Only remove the
backplate(s) that is adjacent to the joint.

Patent Pending

#8-18 x 1/4" Screws

(provided)

#10-32 x 5/8" Screws

(provided)

Yoke Bracket

(provided)

Joint Sleeve

Joint Sleeve

Yoke Brackets
(2) (provided)

Secure joint with two yoke brackets using #10-32 x 5/8" screws (provided). CAUTION: when installed correctly, these brackets will pull

luminaires together to make a tight joint. Do not over-tighten.

Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • [phone] • Fax: [phone] • www.finelite.com

CAUTION: All power connections to be installed to local/national codes by a Certified Electrician.

#10-32 x 5/8" Screws (2)(provided)

6 of 8

© 2017 FINELITE, INC. ALL RIGHTS RESERVED. Form 98386. V2 11/17

HP-2 Wall Wash Arm Mount Installation Instructions

Step 5 - Luminaire Closure

A. Install Adjustment Screws

Right Perspective View

#1/4-20 x 5/8"

Adjustment Screws

(provided)

Wall Bracket Cover

B. Reinstall Backplate(s)

Right Perspective View

Backplate Assembly

#8-18 x 1/4"
Screw
(provided)

#8-18 x 1/4"
Screw
(provided)

Install #1/4-20 x 5/8" adjustment screws (provided) onto the arm brackets, engaging the wall brackets. Use screws to level luminaire.
Tighten to raise and loosen to lower. Slide wall bracket cover along arm towards the wall until mounting magnets engage the wall
bracket cover to hold it in place.

#1/4-20 x 5/8"
Adjustment Screws

(provided)

Patent Pending

#8-18 x 1/4" Screws

(provided)

LED Harness

Reinstall backplate(s) and secure with #8-18 x 1/4" screws (one per side of the extrusion). Plug in LED harness.

Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • [phone] • Fax: [phone] • www.finelite.com

CAUTION: All power connections to be installed to local/national codes by a Certified Electrician.

© 2017 FINELITE, INC. ALL RIGHTS RESERVED. Form 98386. V2 11/17

7 of 8

HP-2 Wall Wash Arm Mount Installation Instructions

Step 5 - Luminaire Closure

C. Install Kick Plate Joiner

Bottom-Up View

Starter

Kick Plate Joiner

Kick Plate
Joiner

Joiner/Ender

Kick Plate
Joiner

D. Reinstall Diffusers

Align Diffuser
Here

Side View

Wall

Lobe

Kick Plate Joiner

Install kick plate joiner at the joint of the luminaires.

A. Rotate the kick plate joiner
B. Tip it into the back plate over the kick plates.

Kick Plate Joiner

(provided)

Patent Pending

Kick Plate

Kick Plate

A. B.

Diffuser

Reinstall diffuser by aligning it to the backplate as shown. Press the side with a lobe into the luminaire until it snaps.
Turn power on to luminaire.

Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • [phone] • Fax: [phone] • www.finelite.com

CAUTION: All power connections to be installed to local/national codes by a Certified Electrician.

© 2017 FINELITE, INC. ALL RIGHTS RESERVED. Form 98386. V2 11/17

8 of 8