Fine Fixtures FINF1004 Installation & Assembly

INSTALLATION INSTRUCTIONS

206 wembly Road.

New Windsor, NY 12553

Phone: [phone]

Fax: [phone]
info@nextures.com
www.nextures.com

Important Information

The bath must only be supported by the feet or base.
Do not support the bath by the rim.

Before installing a rim-mount bath faucet, refer to the online

product specification sheet. Ensure clearance under the rim

before drilling faucet holes in the rim.

Provide adequate floor support. Refer to the specification sheet
for specific floor-loading requirements.

Make sure the subfloor is level. Provide drain access from below.

Provide access to all plumbing connections. Observe all local
building and plumbing codes.

1. Construct the framing. Refer to the

specication sheet.

4. Install the drain to the bath.

Refer to the apron
instructions and
provide necessary
support.

5. For adhesive installation, apply a

generous amount of construction
adhesive to the bath feet or base.

Conventional woodworking tools

and materials for better installation

100% Silicone
Sealant

*Drop cloth
*Construction Adhesive

3. Install the rough plumbing.2. Optional Add-On Apron:

7. With help, lift the bath into position.

Verify level. Ensure the feet or base
are fully supported.

8. Make the nal drain

connections. Position a
protective liner
in the bath basin.

9. Install water-resistant wallboard

Water-Resistant Wallboard

11. Apply 100% silicone sealant around

the bath along the nished walls and deck.

Silicone Sealant

10. Install the nished wall and deck

material to within 1/16" (2 mm) of
the bath rim.

Finished Material

F O R A LIFE O F S TYLE

TM