How it Works
FINDER
Loading...
65.31.8.230.0300
Specification
6 pgs601.16 Kb0

FINDER 65.31.9.024.0300, 65.31.8.230.0300, 65.31.9.012.0300, 65.31.9.110.0300, 65.31.8.024.0300 Specification

Download
Page 1
65.31 65.61
1
1NO+1NC (SPST-NO+SPST-NC) 1NO+1NC (SPST-NO+SPST-NC)
20/40* 20/40*
250/400 250/400
5,000 5,000
1,000 1,000
1.1 1.1
1,000 (10/10) 1,000 (10/10)
AgCdO AgCdO
6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400
6 - 12 - 24 - 48 - 60 - 110 - 125 - 220
2.2/1.3 2.2/1.3
(0.8…1.1)U
N
(0.8…1.1)U
N
(0.85…1.1)U
N
(0.85…1.1)U
N
0.8 UN/0.6 U
N
0.8 UN/0.6 U
N
0.2 UN/0.1 U
N
0.2 UN/0.1 U
N
10 · 106/30 · 10
6
10 · 106/30 · 10
6
80 · 10
3
80 · 10
3
10/12 10/12
44
1,500 1,500
–40…+75 –40…+75
RT I RT I
Contact specification
Contact configuration
Rated current/Maximum peak current A
Rated voltage/Maximum switching voltage V AC
Rated load AC1 VA
Rated load AC15 (230 V AC) VA
Single phase motor rating (230 V AC) kW
Breaking capacity DC1: 30/110/220 V A
Minimum switching load mW (V/mA)
Standard contact material
Coil specification
Nominal voltage (U
N
) V AC (50/60 Hz)
V DC
Rated power AC/DC VA (50 Hz)/W
Operating range AC
DC
Holding voltage AC/DC
Must drop-out voltage AC/DC
Technical data
Mechanical life AC/DC cycles
Electrical life at rated load AC1 cycles
Operate/release time ms
Insulation between coil and contacts (1.2/50 µs)
kV
Dielectric strength between open contacts V AC
Ambient temperature range °C
Environmental protection
Approvals (according to type)
* With the AgSnO
2
material the
maximum
peak
current is 120 A - 5 ms on NO contact.
F
OR UL HORSEPOWER AND PILOT DUTY RATINGS
SEE “General technical information” page V
Copper side view
• 20 A rated contacts
• Flange mount/Faston 250
(6.3x0.8 mm) connection
Features
20 A Power relays 1 NO + 1 NC (SPST-NO + SPST-NC)
65.31 Flange mount Faston 250 connections
65.61 PCB mount
• AC coils & DC coils
• Cadmium Free option available
• 20 A rated contacts
• PCB mount -
bifurcated terminals
65.61
65 Series - Power relays 20 - 30 A
Page 2
65.31-0300 65.61-0300
1 NO (SPST-NO), ≥ 3 mm* 1 NO (SPST-NO), ≥ 3 mm*
30/50** 30/50**
250/400 250/400
7,500 7,500
1,250 1,250
1.5 1.5
1,000 (10/10) 1,000 (10/10)
AgCdO AgCdO
6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400
6 - 12 - 24 - 48 - 60 - 110 -125 - 220
2.2/1.3 2.2/1.3
(0.8…1.1)U
N
(0.8…1.1)U
N
(0.85…1.1)U
N
(0.85…1.1)U
N
0.8 UN/0.6 U
N
0.8 UN/0.6 U
N
0.2 UN/0.1 U
N
0.2 UN/0.1 U
N
10 · 106/30 · 10
6
10 · 106/30 · 10
6
50 · 10
3
50 · 10
3
15/4 15/4
44
2,500 2,500
–40…+75 –40…+75
RT I RT I
* Distance between contacts ≥ 3 mm
(EN 60335-1).
** With the AgSnO
2
material the maximum
peak current is 120 A - 5 ms on NO contact.
F
OR UL HORSEPOWER AND PILOT DUTY RATINGS
SEE “General technical information” page V
Contact specification
Contact configuration
Rated current/Maximum peak current A
Rated voltage/Maximum switching voltage V AC
Rated load AC1 VA
Rated load AC15 (230 V AC) VA
Single phase motor rating (230 V AC) kW
Breaking capacity DC1: 30/110/220 V A
Minimum switching load mW (V/mA)
Standard contact material
Coil specification
Nominal voltage (U
N
) V AC (50/60 Hz)
V DC
Rated power AC/DC VA (50 Hz)/W
Operating range AC
DC
Holding voltage AC/DC
Must drop-out voltage AC/DC
Technical data
Mechanical life AC/DC cycles
Electrical life at rated load AC1 cycles
Operate/release time ms
Insulation between coil and contacts (1.2/50 µs)
kV
Dielectric strength between open contacts V AC
Ambient temperature range °C
Environmental protection
Approvals (according to type)
2
Copper side view
Features
30 A Power relays 1 NO (SPST-NO)
65.31-0300 Flange mount Faston 250 connections
65.61-0300 PCB mount
• ≥ 3 mm contact gap
• AC coils & DC coils
• Cadmium Free option available
• 30 A rated contacts
• Flange mount/Faston 250
(6.3x0.8 mm) connection
• 30 A rated contacts
• PCB mount -
bifurcated terminals
65.61-0300
65 Series - Power relays 20 - 30 A
Page 3
3
Example: 65 series power relay, PCB with bifurcated terminals, 1 NO + 1 NC (SPST-NO + SPST-NC) contact, 12 V DC coil.
Ordering information
A: Contact material
0 = Standard AgCdO 4 = AgSnO
2
B: Contact circuit
0 = 1 NO + 1 NC
(SPST-NO + SPST-NC)
3 = NO (≥ 3 mm contact gap)
Series Typ e
3 = Faston 250 (6.3x0.8 mm)
with rear flange mount
6 = PCB with bifurcated terminals
No. of poles
1 = 1 NO + 1 NC (SPST-NO + SPST-NC)
Coil version
8 = AC (50/60 Hz) 9 = DC
Coil voltage
See coil specifications
6 1 0 09
D: Special versions
0 = Standard 9 = Type 65.31 without rear flange
mount
C: Options
0 = None
0 0
ABCD
... .
01265
Insulation according to EN 61810-1
1 NO + 1 NC 1 NO
Nominal voltage supply system V AC 230/400 230/400 Rated insulation voltage V AC 250 400 250 400 Pollution degree 3 2 3 2
Insulation between coil and contact set
Type of insulation Basic Basic Overvoltage category III III Rated impulse voltage kV (1.2/50 µs) 4 4 Dielectric strength V AC 2,500 2,500
Insulation between open contacts
Type of disconnection Micro-disconnection Full-disconnection Overvoltage category — III Rated impulse voltage kV (1.2/50 µs) — 4 Dielectric strength V AC/kV (1.2/50 µs) 1,500/2 2,500/4
Conducted disturbance immunity
Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV) Surge (1.2/50 µs) on A1 - A2 (differential mode) EN 61000-4-5 level 4 (4 kV)
Other data
Bounce time: NO/NC ms
5/6 (1 normally open + 1 normally closed)
7/— (normally open) Vibration resistance (10…150)Hz: NO/NC g 20/13 Shock resistance g 20 Power lost to the environment without contact current W 1.3
with rated current W 2.1 (65.31, 65.61) 3.1 (65.31/.61.0300)
Recommended distance between relays mounted on PCB mm ≥ 5
Technical data
65 Series - Power relays 20 - 30 A
Typ e
Coil version
AB C D
65.31 AC-DC 0 - 4 0 - 3 00- 9
65.61 AC-DC 0 - 4 0 - 3 00
Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold.
Page 4
Coil specifications
Contact specification
Nominal Coil Operating range Resistance Rated coil
voltage code
consumption
U
N
U
min
U
max
R
I at UN (50Hz)
VVVΩ mA
6 8.006 4.8 6.6 4.6 367 12 8.012 9.6 13.2 19 183 24 8.024 19.2 26.4 74 90 48 8.048 38.4 52.8 290 47 60 8.060 48 66 450 37
110 8.110 88 121 1,600 20 120 8.120 96 132 1,940 18.6 230 8.230 184 253 7,250 10.5 240 8.240 192 264 8,500 9.2 400 8.400 320 440 19,800 6
AC coil data
Nominal Coil Operating range Resistance Rated coil
voltage code
consumption
U
N
U
min
U
max
R I at U
N
VVVΩ mA
6 9.006 5.1 6.6 28 214 12 9.012 10.2 13.2 110 109 24 9.024 20.4 26.4 445 54 48 9.048 40.8 52.8 1,770 27.1 60 9.060 51 66 2,760 21.7
110 9.110 93.5 121 9,420 11.7 125 9.125 106 138 12,000 10.4 220 9.220 187 242 37,300 5.8
DC coil data
F 65 - Electrical life (AC) v contact current
1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature.
1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature.
4
65 Series - Power relays 20 - 30 A
Cycles
• When switching a resistive load (DC1) having voltage and current
values under the curve, an electrical life of ≥ 80·103can be expected.
• In the case of DC13 loads, the connection of a diode in parallel with
the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased.
H 65 - Maximum DC1 breaking capacity
DC breaking current (A)
DC voltage (V)
1 normally open + 1 normally closed type
1 normally open type
R 65 - DC coil operating range v ambient temperature R 65 - AC coil operating range v ambient temperature
Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4
limit for 1NO+1NC types
Page 5
Accessories
65 Series - Power relays 20 - 30 A
065.05
Top flange mount for types 65.31.xxxx.xxx9 065.05
065.05 with relay
065.05
065.05 with relay
065.07
Top 35 mm rail (EN 60715) mount for types 65.31.xxxx.xxx9 065.07
065.07 with relay
065.07
065.07 with relay
065.08
Rear 35 mm rail (EN 60715) mount for types 65.31.xxxx.xxx9 065.08
065.08 with relay
065.08
065.08 with relay
5
Page 6
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use