Fimi X8 Mini User guide

Please read the user manual carefully before using and keep the manual for future reference

FIMI X8 MINI User Manual

Services & Support

FIMI provides X8 Mini users with tutorial videos and the following information：

1. 《FIMI X8 MINI User Manual》

2. 《FIMI X8 MINI Quick Start Manual》

3. 《FIMI X8 MINI Disclaimer and Safety Operation Instructions》
Users are advised to watch tutorial videos before using the product and read
FIMI X8 Mini Disclaimer and Safety Operation Instructions carefully and get
to know the process of using by going through FIMI X8 Mini Quick Start Manual.
For more detailed product information, please refer to FIMI X8 Mini User Manual.
Please download the firmware on the link below ：https://www.fimi.com

4. Please scan the the following QR-code to download FIMI Mini App

1

Product Introduction

The FIMI X8 Mini is a high integrated and foldable drone equipped with long
flight time, strong wind resistance, 250g-class ultra-light design and other
advanced technologies which achieve functions like long-distance remote
control, intelligent flight, precise landing, etc. The built-in 3-axis gimbal
stabilizes the camera which is able to shoot 4K video at 30 fps and performs
real-time image transmission. The easy-to-use APP enriches with smart
features like one-tap edit, and fast connection, bring you more joyful flight trip.

Package List

Aircraft

Remote controller Battery ScrewdriverSpare Propellers

Instruction Screws USB-Cable Cable Gimbal Cover

2

Product Overview

1 Drone

Integrated gimbal cameraLanding gear Motor

Clockwise propeller Counterclockwise propeller

3

Optical flow camera

Power button Battery level light

IFI
W

RC

TOF sensor

Charging port

Wi-Fi/RC switchFlight status light

4

2 Remote controller

Left Stick

Mobile holderPower buttonBattery level lights

Right Stick

Auto returnCharging portStick storage slot

5

Antenna

Shoot button

Record button

Dial

6

Controller Functions

Buttons

Left stick

1

Right stick

2

RTH (Return to Home)

3

Photo button

4

Video button

5

Dial

6

Power button

7

Function description

Push stick forward to ascend
Pull stick backward to descend
Move stick left & right to Yaw CCW
Move sick right to Yaw CW

Push stick forward to Pitch (fly) drone forward
Pull stick backwards to Pitch (fly) drone backwards
Move stick left to Roll (fly) drone left
Move stick right to Roll (fly) drone right

Long press the button for over 2 seconds, and the
drone will enter RTH mode when you hear a beep.
Short press the button to cancel RTH mode

Short press to shoot the picture

Short press to start / stop recording

Adjust the pitch angle of gimbal camera

Short press to view the battery level
Short press+long press 2 seconds to power on/off

7

Right

Up

Backward

Forward

Drone heading

Up

Counter
clockwise

Down

Left stick Right stick

Note: The stick mode can be set in FIMI Navi Mini app. (The default is Mode 2)

Clockwise

Down

Left

Forward

Backward

RightLeft

8

Drone

Flight Mode:

GPS Mode

To achieve precise hovering, the drone is equipped with a GPS module. The intelligent
flight function works in GPS mode. Users can enable Sport Mode or Beginner Mode
in the flight settings. When the Beginner Mode is on, the flight speed, flight distance,
flight altitude and RTH altitude will be limited. In sport mode, the maximum flight speed
is 16m/s, the maximum ascending speed is 5m/s, and the maximum descending speed
is 3.5m/s.

VPU Mode (Vision Processing Unit Mode)

An Optical Flow module is also built into the drone for precise hovering and landing
at the home point. In VPU mode, the intelligent flight function is not supported. The
maximum flight speed is 10m/s (36 km/h), the maximum ascending speed is 3m/ s
(11 km/h), and the maximum descending speed is 2m/s (7 km/h). When the drone is
flying above a well-lit ground with a clear texture and the GPS signal is poor, it will
switch automatically to VPU mode.

ATTI Mode (Altitude Mode)

When the GPS signal is poor or the compass has interference, the drone enters in
ATTI mode. In this mode, the drone can start drifting horizontally and intelligent flight
mode is not supported. Therefore, in case of any accidents, we recommend flying in
an open area with good GPS signal reception. Once the drone enters in ATTI mode,
please land in a safe place as soon as possible.

9

Drone Lights

Drone heading

Drone status lights

Drone status Light status Drone lights

Initial check failed
Compass error
IMU error
Cannot take off

IMU is warmed up Self-checking Yellow lights fade in and out

Self-checking failed
Take-off forbidden
Flying error

Red lights are on

10

Compass calibration

Compass needs to be
calibrated

The drone disconnects
with the RC

Low battery warning Low battery

Extremely low battery
warning

Take off as normal

ATTI mode ATTI mode Red lights are on

Firmware update Firmware update

Directly connect with
the phone

Disconnect with the
phone

Pairing Pairing Tail lights turned off

Compass calibrating

Compass needs to be
calibrated

Signal is lost

Extremely low battery

Take off Green lights fade in and out

Connecting Status light flashes in turn

Signal lost Yellow lights fade in and out

Horizontal green light is on
and vertical red light is on

The red and yellow light is
flashing at regular intervals

Yellow lights fade in and out

Red lights flash quickly

Red lights double flash

The red and green light
flash at regular intervals.

11

Safety Protection

Failsafe Return

Failsafe return is only supported in GPS mode. When the drone and remote controller
signal is interrupted for more than 2 seconds, the flight control system built into the
drone will take over the control of your drone, plan the return path according to the
original flight path, then the drone will fly back and land at the home point. This function
works precisely if enough GPS satellites are locked, the compass has no interference
and the home point has been recorded correctly. If the wireless signal reconnects
during the failsafe return, the pilot can short press the RTH button to cancel, and the
drone will hover at the current position.

current altitude≥return altitude

home point home point

Low-power Protection

In flight, when the battery level is only enough for RTH, App advises users to return,
and the drone will return automatically after 10 seconds countdown. When the battery
level is only enough for landing, App advises users to land as soon as possible, and
the drone will land automatically after 10 seconds countdown. When the battery level
is at 15% usage left, the drone will be forced to land.

critical low b attery

15%10%0% 30%

landing batter y level

normal batter y levellow battery

current altitude<return altitude

Ascend first

（the default altitude i s 30m）

current batter y levelRTH battery level

100%

12

Hovering on the Edge of No-fly-zone

The drone will automatically hover in the restricted flight area designated by the state,
such as the edge of airports, and the App will appear corresponding hints. The user
can use sticks to fly the drone from the edge of the no-fly-zone, but the drone will not
enter the no-fly-zone.

No- fl y-zo ne

Intelligent Flight

Auto Take-off
When the conditions are right, tap the auto take-off icon on the left side of the APP
interface. In GPS mode, the drone will take off to an altitude of 4 meters and hover for
sticks control. In VPU mode, the drone will take off to an altitude of 1.2 meters and
hover for sticks control.

4m

GPS Mode VPU Mode

Auto Landing

When the conditions are right, tap the auto landing icon on the left side of the APP
interface.
Note: Users can short press the RTH button to exit intelligent flight.

Hover

1.2m

13

Auto Return

When the drone is in flight, the user can long press the auto return button to return the
drone. When the return distance is less than 10 meters and flight altitude is less than
3 meters, the drone will ascend to 3 meters first and return to the home point; if the
flight altitude is greater than or equal to 3 meters, the drone will directly return to the
home point.
When the return distance of the drone is greater than or equal to 10 meters and the
flight altitude is less than 30 meters, the drone will ascend to 30 meters and return to
the home point; if the flight altitude is 30 meters or more, the drone will directly return
to the home point . The user can press the Auto Return button or tap the APP to the
left to exit.

Altitude

altitude ≥30m
distance≥10m

30m

altitude ≥3m

dis ta nc e＜1 0m

3m

home point

altitude ＜3m
distance＜10m

10m

altitude ≤30 m
distance≥10m

Distance

14

Smart Track

Smart Track is supported only in GPS mode. The user can choose Trace, Profile, or
Lock in the App menu. The drone will trace the subject chosen at the App interface at
a distance.
In Trace mode, the heading will always lock at the target and trace it from the back at
a distance.

moving directionheading

In Profile mode, the heading will always lock at the target and trace it from the side at
a distance.

drone moving d irection

heading

moving direction

15

In Lock mode, the drone will hover at a place if flight speed is 0, following the target
360°. The user can also adjust flight speed, and the drone will fly around the target at
a certain distance.

flight sp eed =0m/s

camera trac king 360°

Note: In Smart Trace, users should always make sure to avoid people, animals and
obstacles in the tracking path to ensure the flight safety. Users should comply with
local laws and regulations when using the function.

Spiral flight

The user selects spiral flight on app, set the center point and radius. The drone will fly
around the center point at a default speed. It the user sets a POI, the drone will lock
and shoot the POI. Fly away from the central point to set radius. Set flight speed, move
direction and heading. If the heading is free,the user can drag a rectangle around a POI

flight sp eed = 0m/s

16

Center poi nt

If sticks are moved in flight, the flight altitude or radius will be changed.
Taking Mode 2 as example:

Up

Narrow radi us

POI

Counter
clockwise

Clockwise

Down

Left stick Right stick

Direction&

Speed

Expand radius

Direction&

Speed

17

Tap-fly

The user can select Tap-fly in the App. Tap map to choose a destination and set flight
speed, the drone will fly over there at a default speed in a straight line. If a point of
interest is set, the camera will be locked at the POI
Tap the map to choose a destination
Switch to image interface to drag a rectangle around the POI
Set flight altitude and speed

POI

Drone Destination

18

Course Lock

The user can select Course Lock mode in the App. The drone saves current fly direction
as heading. The user can control sticks to adjust direction of head and gimbal, but the
forward direction remains unchanged.

Tripod Mode

The max speed of the drone is 1m/s, and the max rotation speed is 60°/s. In
Tripod Mode, operation sensitivity is lowered simultaneously to shoot more
stable and smooth video.

Aerial Mode

The brake distance is lengthened and the angular speed of rotation is limited
to make sure the shooting videos are more stable and smooth

Note: Course Lock is enabled in Aerial Mode, Users can turn it on in the APP

19

Spiral Mode

The user can select Spiral Mode in the App. Set the central point and radius, the drone
will spirally fly upward and shoot a video simultaneously, showing a sense of space.

Fly to a point to set as the central point.
Fly away the central point to set radius.
Set spiral direction and flight distance to start and shoot a video at the same time.
The mission interrupted if the user moves sticks.

Radius

Center poin t

20

One-click Video

Soaring flight: Select a target and the drone will rise quickly according to the set

altitude, and shoot a video.
Dronie flight: Select a shooting target, the aircraft will automatically rise and fly far
away according to the set distance and current gimbal angle, and shoot a video.
Orbit flight: Select the target, the aircraft will keep the current altitude, take the
horizontal distance from the target as the radius, circle the target, and shoot a video.
Spiral flight: Select the shooting target, the aircraft will take the top of the target as
the center, and the horizontal distance from the target as the radius of the inner
circle, according to the set radius difference, to spiral around the center point for a
uniform speed and shoot a video.

One-tap Edit

1. One-tap edit video material as a 15-second short video. 5 templates and filters are
available.

2. Save the edited video.

3. Share the work to Youtube, Facebook and Twitter.

Waypoint

Choosing waypoint and drawing route both are available at map. The drone flies along
waypoint route at a default speed. If a point of interest is set, the camera will be locked
at the POI. The user can select a way to set waypoints, including choosing points in
flight or on the map, historical routes.
Choosing points in flight:

1. Control the drone to a point to set as a waypoint.

2. Using sticks to set flight altitude and heading direction, dials to set gimbal angle,
and actions when reaching the waypoint.

21

3. When all waypoints ready, please set waypoints routes attribute, including flight
speed, heading direction, action at the destination.

4. POI is enabled when executing waypoints.

Choosing points on the map

1. Tap map to add waypoint.

2. Set waypoint attribute, including flight altitude and action at the destination.

3. Drag the POI icon to the map, and set its altitude and relate waypoints.

4. when all waypoints ready, please set flight speed, failsafe action, and action at the
destination.

5. POI is enabled when executing waypoints.

Historical routes

1. Preview the waypoints and its attribute on "Favorite" after entering the "History" list.

2. Tap to start and show the real-time waypoints trace.

3. The drone fly as the historical route after taking off.

Waypoint

D

r

on

e head

ing

POI

22

SAR Mode

The user can select SAR Mode in the APP. With real-time GPS coordinates, the drone
could help user to search and rescue.
Image interface: show real-time coordinate and time of the drone, support digital zoom,
screen shots to share it online
Map interface: show real-time coordinate and time of the drone in ordinary map and
satellite map, screen shots to share it online

Precise Landing

In the process of Return to Home, the optical flow sensor will match landing pad features
above the home point. Once matched successfully, the drone will land on the landing
pad precisely.

Note: Please enable precise landing in the app before use it.

Fix-wing Mode

In Fix-wing Mode, the drone can only fly forward, not backward. The user can use sticks
to control flight speed and course as showed below (Mode 2).

Left stick

Right stick

push upward
Push downward
toggle left
toggle right

push upward
push downward

toggle left
toggle right

up
down
turn left
turn right

accelerate
decelerate
turn left
turn right

23

Propellers

Please install and remove propellers as the picture shown.
Attach the gray marked propellers to the motor mounting base with gray marks
on the arms.
Distinguish clockwise propellers and counterclockwise propellers before installation.

Need to use a screwdriver for installation and make sure screws are locked well.

24

Battery

Hardly push the battery, after the battery installed in place, there will be a "click" sound.
To remove the battery, you need to press the bottom buckle to pull out the battery.

Battery buckle

Safety tips: Please place the battery separately if don’t use it for a long time.

25

Charging

Use the USB cable to charge the battery as shown below.
The battery status light flashed when charging.
The battery level light off when charging finished.

It takes 2.5h to fully charge the battery via 5V/2A, 1.5h via 9V/2A and 1h via 9V/3A.

Note:

1. The power of charger affects the charging time. For ensuring the charging time, please
use charger with protocol of QC2.0 and above. PD protocol fast charging is not
supported.

2. Charging temperature ranges from 5℃~40℃. The battery can’t be charged if
temperature higher or below this range

26

Turning on and off

R

C

W

I

F

I

Short press+long press power button 2 seconds to power on/off .
Short press the power button to check battery level.
Please check Wi-Fi/RC toggle before turning on the drone. It is supposed to restart
the drone if switch the Wi-Fi/RC status.

Power button

27

Insert Micro SD card

When installing Micro SD card, please pull out the battery.
Insert the SD card into the SD card slot.
When removing SD card, press the SD card to pop out.

D

S

28

Equip and remove the gimbal protector

Equip and remove the gimbal protector as shown

Equip the gimbal protector as
the arrow leading

Remove the gimbal protector as
the arrow leading

29

Gimbal

FIMI X8 MINI combines a light weight 3-axis mechanical gimbal with the latest
professional control algorithms and ±0.005° control accuracy, which provides a stable
shooting platform for camera. The pitch axis, default to tilt from 10°to -90°, can be
adjusted by left dial of remote controller or App.The camera is equipped with 1/2.6 inches
CMOS sensor, 12M pixels and 26mm focal length.

10°

Working Mode

Horizontal to
the ground

Follow：
The angle between the gimbal’s
orientation and aircraft front remains
constant at all times.

-90°

FPV mode：
The gimbal synchronizes with the
movement of the aircraft to provide a
first-person flying experience.

Horizontal to
the drone

30

Remote controller

1 Turning on and off

Short press+long press power button 2 seconds to power on/off.
Short press to check battery level.

Power button

31

2 Charging

Connect the remote controller to a power adapter as shown below.
When the RC is in charge, the battery level lights are flashing.
When the RC is fully charged, the battery level lights go out.
It takes about 2.5 hours to fully charge the RC in the powered off condition.

32

3 Connect the remote controller

Use USB cable to connect the device as shown.
Unfold the RC to place the device.

2

1

33

4 Taking Videos & Photos

Press the shoot button to take a photo. A photo is taken when you hear 2 short sounds.
Press the record button to record video. Recording starts when you hear 2 short
sounds. Press again to stop recording with 4 short sounds.
The pitch angle of the gimbal can be controlled by toggling the left dial up and down.

Video button

Photo button

Dial

34

5 Sticks Control

Forward

（Mode 1)

Up

ClockwiseCounterclockwise

Backward

Left sticker Right sticker

Up

Down

Left sticker Right sticker

Forward

Backward

Left sticker Right sticker

（Mode 2)

ClockwiseCounterclockwise

（Mode 3)

Right Left

Down

Forward

Backward

Up

Down

Right Left

Right Left

ClockwiseCounterclockwise

35

Remote Controller Pairing

R

C

W

IFI

When a new remote controller or drone is replaced, please pair the remote controller
and the drone again as shown below：
Turn on the drone and remote controller.
Wait for 10 seconds, then long press the power button of controller until hearing the
beep sound, and the light will be flashing.
Long press the power button of the drone till the tail light off.
The code pairing succeeds when the power button on the RC turns white and the
tail light on the drone keeps on.

Long press the power button. Long press the power button.

Note：

1. Please ensure the drone and the RC stay within 0.5m while pairing.

2. Ensure the battery level of drone and RC are more than 10%.

36

Light status of remote controller

Remote lights

Short press the power button

Fade in and out

Flash in turn

Light keeps on

LED1 LED2 LED3 LED4 Battery level

Remote status

Check battery level

Not connected to the drone

Pairing or updating the firmware

Connection normal

75%＜ Battery level≤100%

50%＜ Battery level≤74%

25%＜ Battery level≤49%

10%＜ Battery level≤24%

The remote controller beeps to warn
that the battery level is less than 10%.

37

APP

Download and install Fimi Navi Mini app, register a FIMI user account or enter the
app directly.
Note：You are supposed to register and log in for enjoying more special flight modes.

Image Interface

1 2 3

9

8

1. .Return to login interface

：Tap to return to the home screen.

2. Real-time parameter

In Flight：Show the real-time status of the drone.

4

5

67

38

：Height from the home point.

：Distance from the home point.

VS

：Vertical speed of aircraft.

HS

：Horizontal speed of aircraft.

：Battery level is only enough for landing.

3.Signal status, battery status and default settings

18

：Display the current GPS signals. 0-6 means low signal and displays in red colour,
7-12 medium signal and in yellow colour, more than 13 great signal and in white colour.

：Display RC signal. Tap to enter the RC setting.

：Display video transmission signal.

：Display real-time battery level. Tap to enter battery setting.

：Tap to enter setting.

4.Camera

：Switch camera mode.

：Tap to start recording video.

：Tap to start shooting photos.

：Tap to shoot one-tap video.

：Tap to choose from photo mode, video mode, one-tap video and smart flight mode.

：Tap to preview captured photos and videos.

39

5.Smart flight

：Switch various switch modes from waypoint mode, spiral mode, route mode,
tripod mode and so on.

：Flight planning mode includes setting POI, flight route and historical route.

：Smart tracking includes trace tracking, profile tracking and lock tracking.

：Spiral flight.

：Waypoint flight.

：SAR mode.

：Aerial mode.

：Tripod mode.

：Flight direction locked.

：Fixed wing.

：Time lapsed mode.

6.Gimbal and image parameter

：Show remaining and total storage of SD card.

4K/30

：Camera parameter settings, tap to set EV,ISO,shutter,video or photo mode,
resolution, video size, white balance, etc.

：Tap to show shutter parameter.

：Tap to show ISO parameter.

：Tap to show EV parameter.

40

-57.3

：Display the current pitch angle of the gimbal，Long press the gimbal for more
than 2 seconds to vertically downward, double-click the gimbal to return to
center

7. Light metering and locked exposure

Tap any position on the app to meter the light or lock the exposure value.

8. Map: Display the location of drone. Switch interfaces from specific
map, orientation ball and guided map.

Interface of map:

41

：Tap to center the drone.

：Display the location of the drone.

：Display the location of the Home.

：Display the location of the phone.

：Tap to correct the direction.

：Switch the map.

：Home point.

：Tap to switch to guided map.

：Represent the direction of the phone.

：The position of drone to the phone. And the direction of the drone.

：Compass.

：Blue area means the orientation of the drone.

9.Shortcuts

：Tap to auto takeoff.

：Tap to auto land the drone.

： Tap to return the drone.

42

RC

WIF

I

Wi-Fi mode connection：

RC

WI

FI

1. Move the Wi-Fi/RC button to the right when the aircraft is off as shown in the figure.

Note:
After switching the Wi-Fi mode, the remote control and the aircraft cannot be connected;
if you need to use the remote control again to control, turn off the aircraft and move the
Wi-Fi/RC button to the left

43

2. Open the APP, click "connect" in Wi-Fi mode

Follow the steps in the APP to display the interface after successful connection

：Virtual key switch

-57.3

：Click the gimbal angle, the adjustment bar will pop up on the right，Long press
the gimbal for more than 2 seconds to vertically downward, double-click the
gimbal to return to center

44

Flight

Distinguish the direction of the drone
The side of gimbal camera is head of drone.

Distinguish the direction of drone through status light.

Drone heading

Safety tips：User should face to the tail of drone when operating it, in case of accident
caused by wrong direction.

45

Prepare to Fly

Make sure that the battery of the aircraft and remote controller is sufficient.
Make sure that the propeller is properly installed and free from damage and aging.
Make sure that the camera lens is clean.
Make sure that the SD card is inserted.

Manual take off/land

Keep both sticks to the bottom inner still over 3 seconds, the propellers start spinning.
Release both sticks once propellers spinning, and firmly push the left stick upward
to take off the drone.
When the drone in flight, release the sticks and the drone will hover automatically.

Left stick Right stick

Left stick Right stick

Slowly move the left stick downward to land the drone.

Once the drone landed, push and hold the left stick down over 5 seconds, the motors
will stop.

Safety tips: The drone has no waterproof function. Please be careful of landing
environment. Do not land on an inclined plane for safety.

Left stick

Right stick

46

Stop propellers in an emergency

When motors can't properly turn off, please toggle the left stick to the bottom inner
in maximum range, and press Auto return-to-home button for 5 seconds
simultaneously, the motors will stop.

Safety tips: Do not do the operation above during normal flight to avoid motors being
stopped in the air.

47

Flying Condition Requirement

1. The drone is suitable for people above 16 years who have full civil capacity.

2. Make sure to keep some distance from people, animals, trees, vehicles and buildings
while using the drone. Please be careful when someone approaches.

3. Keep away from airports, railways, highways, high-rise buildings, utility poles and
other dangerous environments when operating the drone.

4. Keep away from the areas with complex electromagnetic signals such as communication
base stations and high-power antennas when operating the drone.

5. he flight altitude and distance of the drone corresponding to the take- off point will
be limited based on relevant regulations and policies.

6. Do not use this product at the place and time prohibited by regulations and policies.

7. To protect the legitimate rights and interests of users, please follow the product
safety instructions when using.

8. Do not operate the drone in bad weather such as strong winds, rain, snow, or fog.

9. Please operate the drone in a broad place with a good GPS signal.

10. It is suggested that user should make the first flight under the guidance of an
experienced pro.

48

Maintenance and Calibration

Remote Controller Calibration

Please try to calibrate the remote controller when you detect inconsistencies between
stick control and drone flying. Select "RC Calibration" in the remote controller menu
Tap" Start" to calibrate the center, do not move sticks Skip to sticks calibration once
the center calibration succeed Skip to dial calibration once the sticks calibration succeed
Note: Please turn off the power of the drone before calibrating the remote controller.
RC calibration is not available in flight

Compass Calibration

If the magnetic field changes, the compass needs to be re-calibrated to ensure flight
safety. If the drone's compass needs to be calibrated, the App will give corresponding
hints and guidance. After entering the flight control menu, please select "compass
calibration", and then calibrate based on prompts on the App.
Note: Please connect the drone before calibration. Compass calibration is not
available in flight.

Gimbal Calibration

Click "gimbal calibration" and enter the calibration page in the gimbal settings menu.
After the drone is placed smoothly, click to start calibration. Do not move the drone
during the calibration process. After the calibration is completed, the App interface
shows "Calibration succeed". If the App interface shows "Calibration failed", please
recalibrate.
Note: Gimbal calibration is not available in flight.

49

Propellers Maintenance

Propellers are wearing parts. When they're damaged, replace them in time to ensure
flight safety and efficiency.

Battery Maintenance

Do not throw the battery into fire; Do not batter the battery; Lithium battery's capacity
reduces significantly in low temperature conditions. Do not use the battery when it is
below 0 degrees. Do not place the battery under the burning sun.

Gimbal Maintenance

The gimbal of X8 MINI, integrated with the drone, does not need to disassemble.
Please be careful not to scratch the camera when store the drone. Please keep the
camera clean for better image quality.

Drone Self-check

The drone enters the self-check when the drone is powered on. If the self-check failed,
App will pop up corresponding hints.

Firmware Upgrade

Please check the firmware version regularly, new version will be updated by Fimi Navi
App to prompt users to update. Please download new firmware when the App is
connected with the drone and remote controller

50

Drone Specifications

Drone

Product model：FMWRJ04A7

Max ascending speed：5m/s

Max descending speed：3.5m/s

Max flight speed：16m/s

Operating temperature：0~40℃

Suitable altitude：≤4000m

Operating frequency：5.725-5.825GHz

Dimensions：145×85×56mm (folded)

200×145×56mm (unfolded)

Take-off weight：Drone with standard version

battery weight: around 258g

Drone with pro version battery

weight: around 245g

Standard version battery usage time: 30-minutes

Flight time：

(no wind environment and at a constant flying speed of 6m/s)

Pro version battery usage time: 31-minutes

(no wind environment and at a constant flying speed of 6m/s)

Satellite positioning systems：GPS/GLONASS/BEIDOU

Hovering accuracy：Vertical±0.1m (within TOF sensor working range)

±0.5m（when GPS positioning is active）

Horizontal: ±1.5

Remote controller

Net weight：About 260g

Dimensions: 165x89x47mm

Operating frequency：5.725-5.825GHz

Type：Rechargeable lithium battery

Battery voltage: 3500mAh

Nominal voltage: 3.7V

Input: 5V 2A

Max transmission distance: About 8000m

Operating temperature: 0~40℃

Suitable altitude：≤4000m

51

Gimbal camera

Controllable rotation range: 10° ~ -90°(Pitch)

Angular vibration range：±0.005°

Lens: FOV 80°

Camera aperture：f2.0

Camera focal distance：3.54mm

Equivalent focal distance：26mm

Sensor：1/2.6" SONY CMOS

Effective pixels：12M pixels

ISO range：100-3200

Shutter speed：32~1/8000s

Max video resolution：

3840×2160 I 30fps I 25fps I 24fps

Max bitrate：100Mbps

File system：FAT32

Image format: JPG，JPG+DNG

Video format： MP4

Recommended SD card：

Micro SD(U3 grade and above）8~256GB

Note：
*The standard version battery usage time is 30 minutes, measured at a constant flying speed
of 6m/s (no wind or breeze environment) after being fully charged
*The Pro version battery usage time is 31 minutes, measured at a constant flying speed of
6m/s (no wind or breeze environment) after being fully charged
*Remote control distance reaches to 8km (FCC) in open area and no interference. All t
and data above come from FIMI laboratory. Errors may occur in actual use because of
and environmental changes.

Standard version smart battery

Type：Li-ion 2S

Weight： 102g

Capacity：2400mAh

Voltage：7.2V

Limited voltage：8.4V

Energy：17.28Wh

Suitable charging temperature: 5~40℃

Pro version smart battery

Type：LiPo 2S

Weight： 86g

Capacity：2200mAh

Voltage：7.7V

Limited voltage：8.8V

Energy：16.94Wh

Suitable charging temperature: 5~40℃

esting

operating

52