Fimi TX10 User guide

Please read the user manual &Disclaimer carefully before using and keep it for future reference.

FIMI TX10 User Manual & Disclaimer

Disclaimer and Warning

Thank you for p urchasing this pro duct. In order to prote ct your legitimate r ights and interests, p lease

read the Qui ck Start Guide, D isclaimer, and Safe Oper ating Guidelines p rovided with this p roduct

carefull y before using this p roduct. FIMI Techno logy Co., Ltd. (hereinaf ter referred to as FIMI Technology)

reserve s the right to update th e related guides and d ocuments. Befo re setting up and usin g this product,

please vis it the offici al website of fimi (ht tp://www.f imi.com) to downlo ad the manual and read i t carefully

1. FIMI Technolo gy does not take up any res ponsibility fo r any consequenc es caused by purchas ing and

maintain ing this product t hrough unoffi cial channels.

2. Once you st art to use this pro duct, it is deeme d that you have read, unde rstood, approved an d accepted

the instr uction manual, qu ick start guide, d isclaimer and safe o peration guidel ines of this produc t.

3. In the pro cess of using thi s product, pleas e be sure to strictly a bide by and implem ent the requireme nts

includi ng but not limited to t he instructi ons and safety inst ructions.FI MI Technol ogy is not responsi ble for

the advers e consequences c aused by not followi ng instruction s manual or tutoria l videos.

4. For any per sonal injury, acci dent, proper ty loss, legal di spute, and other inc idents caused by t he violation

of the safet y instructions o r the force majeure fa ctors, all unfavorab le events that cause co nflicts of

interest sha ll be borne by the users . FIMI Technology wil l not bear any responsib ility.

5. FIMI Technol ogy will not bear any re sponsibility f or any violation of la ws and regulations t hat occurs

directl y or indirectly by the u ser using this produ ct.

6. Do not mo dify this produ ct without aut horization, and i f resulting in prop erty loss and pe rsonal injury,

FIMI Technolo gy will not bear any c ompensation and l egal responsibil ity.

7. When the prope ller rotates at high sp eed, it may cause seri ous injury to the hu man body. To ensure

user safet y, please t urn off the powe r of the drone when o perating the pro pellers. The leg al responsibili ty

caused by ig noring this ar ticle shall be bor ne by the user.

8. Relevant na tional laws and regu lations could rest rict the fligh t zone. Before flyin g this product, use rs

should un derstand the relevan t local regulatio ns. The user shall bea r all the responsibi lities for the

relevant leg al liabilities ar ising from non-co mpliance with t he above provisions.

Operation guidelines

1. The drone i s dangerous to a cer tain extent and is no t suitable for use and o peration by perso ns under

the age of 18 and o ther persons who d o not have full capabi lity of flying an d operating this p roduct.

2. Please make su re to keep a certain d istance from peo ple, animals, trees, ve hicles and buil dings when

the drone is i n use. When someone a pproaches, please h andle with care.

3. When op erating the dron e, please keep away from d angerous environ ments such as airp orts, railways,

highways, ta ll buildings and po les.

4. When op erating the drone , please stay away from tel ecommunicat ion stations, hig h-power antennas

and other are as with complex el ectromagneti c signals.

5. The fli ght height and fl ight distance of th e drone relatived to th e take-off point w ill be limited acc ording

to relevant law s and policies.

6. Do not use t his product at a plac e and time where the u se of this product is p rohibited by regul ations

and polic ies.

7. In order to prote ct the legal righ ts and interests of use rs, please ensure that yo u follow the produ ct

safety ins tructions dur ing the use and operat ion.

8. Do not f ly in bad weather such a s in strong wind, rain, sn ow, fog, etc.

9. Please ch oose a place with go od GPS signal and op en environment to f ly.

10. It is reco mmended that the u ser takes the first f light under the gu idance of an experi enced user.

Product description

The Fimi rem ote control with sc reen has built-in thi rd-generation Ro kLink high-def inition digit al image

transmis sion system, which is c ompatible with F IMI X8 SE 2022 and subs equent drone prod ucts.It can

achieve a co ntrol distance of up t o 10km at 1080p 30 F PS with the transmi ssion low delay.The remote

control c omes with a built-i n 5.5-inch of 1920x 1080p touch scre en, the highest bri ghtness can reach

1000 cd/m², and suppor t Android 9.0, 4G , Wi-Fi and satellite p ositioning fu nctionalit y.

Buttons and functionality of the remote control

21 3 4 5 6

15
14

13
12

8

91011

7

16 17 18 20 21 22

30

29

19

23

24

25

26

28

27

1. Custom bu tton: The system default s one click to return to th e menu, double clic k to return to the

main inter face (Home butt on function), and long pre ss for 2 seconds to disp lay all the applicat ions

in use. (Ident ifier: C1)

2. Antenna: Transmi t control signal and v ideo image

3. Scale k nob: Logo silkscreen AU X1

4. Scal e knob: Logo silkscree n AUX2

5. Flight c ontrol joystick: T he system defaults to the M ode 2 (U.S. setup)

6. Custom key: Fn c omposite funct ion (identif ication: C2):

1 . Zoom: C2+Ri ght wheel

2 .Pairing: P ress and hold C1+C2 for 5 sec onds at the same time . When entering the p airing, the

batter y indicator will be i n the form of a marquee un til the pairing is su ccessful. If th e pairing fails

within 6 0 seconds, the pairi ng mode will be exite d

3. Forced sh utdown: Press and ho ld the power but ton for 8 seconds

7. Display: Touch s creen, screen size is 5 .5-inch, resolu tion 1920*108 0p, maximum br ightness 100 0cd/m²

8. Speaker : For playing the system vo ice, key prompt tone

9. 1/4" screw hol e: For remote control to f ix tripod

10. Cooli ng holes: For coolin g the remote control

11. Microphone

12. Drone ligh t control button s: Long flight light, f ill light custom b utton (short press to t urn on/off the

auxilia ry light, long pres s for 1.5 seconds to tur n on/off the long f light light

13. Airpl ane mode switch but ton: Three modes, fr om left to right: sm ooth, normal, spor t

14. Power bu tton: Short pres s then long press for 1.5 s econds to turn on th e remote control. Wh en the

remote con trol is on, press it to tur n on/off the scre en; when the power is on, l ong press for 1.5 seco nds

to shutdown /restart

15. Indica tor light: Displays t he current power leve l of remote control an d current status

16. Photo and v ideo recording b uttons：Short p ress for the Photogr aph or recording, lo ng press for 1.5

seconds t o switch between p hoto/video rec ording

17. External mic rophone jack: Sup ports ordinar y 3.5mm earph ones

18. SIM car d slot: Standard SIM c ard

19. HDMI p ort: Output rem ote control screen

20. Micro S D card slot: Suppo rts up to 128G

21. Type-C inter face: The user c an charge the remo te control while u sing. It can be con nected to a compu ter

to upgrade t he firmware of remo te control

22. Pause and ret urn button: Shor t press to pause, lon g press for 1.5 seconds t o return

23. Roller : By default it con trols the pitch an gle of the gimbal, or c an be customized f or third-part y gimbal’s

pitch or yaw a ngle control, mar ked with C7

24. Custom D IP Switch: Mark C3

25. Custom b utton: Mark C5

26. Joystic k compartme nt : Joystick can be dis assembled and store d here (the joystick need s to be

taken out fro m here for the first use)

27. Spare ba ttery: Spare bat tery increase s the battery li fe of the remote contr ol (spare battery is op tional)

28. Custom b utton: mark C6

29. Custom D IP Switch: Mark C4

30. Rolle r: The default state ca n adjust the EV/ISO val ue of the camera, and c an be customized for

third-pa rty payload gim bal’s pitch or yaw co ntrol, marked with C 8

Function definition of remote control indicator lights (four white lights)

The light i s always on in normal sta te, and the light will f lash when abnorma l

Short p ress the power but ton when the power is of f

1+Beep <10%, 1≤25%, 2≤50%, 3≤75%,4>75%, always on

Flashing slowly

4 lights are f lashing in turn

Always on

Check the b attery

Battery indicator

drone not c onnected

Remote cont rol pairing or
softw are upgrade

Communi cation is norma l

Basic parameter information

Image transmission

Operating frequency 2400-2483 MHz

The maxi mum control distan ce 10 Kilome ters

Storage sp ace ROM 16GB+ exp andable (up to 128G)

SIM card

Video ou tput interface

Audio out put interface

Built-in bat tery

Spare bat tery (optional)

Charging w ay Charging m ethod QC fast charge, su pport 12V/9V/5V

Rated power 20W

Charging time

Batter y life

All telec om (China)：

LTE-FDD B1/3/5/8 LTE-TDD B34/ 38/39/40/41
WCDMA B1/8

HDMI

Standard 3 .5mm audio por t

Li-ion bat tery (4800 mAh-7.2V)

Li-ion bat tery (4800 mAh-7.2V)

2 .5hour s（Use 9V USB ch arger）

4 hours

Charging a mbient temperatur e 0-4 0℃

Working environment temperature -10- 60℃

GNSS GPS,GLONASS,BEIDOU

Charge and view battery level

Please ful ly charge the remote co ntrol before using it fo r the first time.

The built-i n battery of the rem ote control will enter t he sleep mode as the fa ctory default , pl ease

charge and a ctivate it before use.

Using the rec ommended char ger. Charging time takes ab out 2.5 hours (9V charg er).

USB-C ca ble

(charger not i ncluded with the p roduct)

Check the b attery: Shor t press the power but ton when the power i s off.
Power on: Shor t press then long p ress for 1.5 seconds to tu rn on the remote cont rol.
Power off : Long press 1.5 seco nds to pop up the shutd own option, cli ck the shutdown op tion to shut down.

Batter y level

Low

High

Preparation before use

Take out the joystic k Install th e joystick Unfold th e antenna

In order to en sure the best transmis sion, the angle of the an tenna should be in acc ordance with the

flight environments.

Activation

When usin g the remote control fo r the first time, ple ase follow the instru ctions on the scree n.

Connect the drone

In the stand ard package, the dron e and the remote contro l are already paired by defa ult. When the

drone and th e remote control are tur ned on, they will be au tomatically con nected.

Pairing

After tu rning on the drone and t he remote control, lo ng press the pairin g button of the drone u ntil the

tail light g oes off, the drone en ters the pairing state, a nd then long press th e remote control C1+C2 at

the same ti me. After pressing t he butto ns for more than 5 second s, the remote control en ters the

frequenc y pairing state. Af ter a few seconds, the t ail light of the drone w ill be turned on ag ain, indicating

that the pai ring is success ful.

Sticks Control

Mode 1

Cou nter-

clockwise

Forward

Clockwise Left

Backward

Left stic k Right stic k

Up

Down

Right

Up

Forward

Mode 2

Mode 3

Cou nter-

clockwise

Up

Down

Right stic k

Right

Clockwise

Clockwise

Down

Left stic k

Forward

Left

Backward

Right

Left stic k

Left

Cou nter-

clockwise

Backward

Right stic k

3. FIMI Navi 2.0

After dow nloading and inst alling the APP, register a FIM I user account and l og in, click to enter th e flight

interfa ce, you can also use it w ithout loggin g in.

Note: You will not be a ble to enjoy some func tions without l ogging in, such as f light recording, e tc.

Connect to the APP

After lau nching the APP, click "E nter Device" to enter th e main interface o f the APP, and the option box

"Do you wa nt to allow Fimi Navi2.0 to ac cess rc? Click "OK " to connect.

Do you want to allow F imi Navi2.0 to access r c?

Cancel OK

Image transmission interface

1 2 3

9

678

4

5

1. Drone status

In fligh t： Display s the current statu s of the drone

GPS: Displ ays the current fli ght mode of the dron e, including GPS, V PU, ATTI

S： Displays the c urrent sport m ode of the drone

：Click to return to the inte rface

2. Real-time flight parameters

110m： The verti cal height bet ween the current po sition of the drone a nd the Home point

1111m: The horizontal di stance betwee n the current posit ion of the drone and t he Home point

VS 3.6m/s： The c urrent vertic al flight speed o f the drone

HS 6.6m /s: The current hori zontal flight spe ed of the drone fli ght

3. Signal status and general settings

： Displays G PS signal strength, 0 -6 in red for weak sig nal; 7-12 in yellow for m edium signal; 13 or

GPS

above in whi te for good signal

: Displays t he signal strength o f the connectio n between the rem ote control and the a ircraft, clic k to

enter the rem ote control setti ngs

： Displays re al-time batter y level, click to enter bat tery setting s

: Click to ente r settings

4. Camera operation

3:26: Video d uration

: Switch th e current mode of t he camera betwe en taking photos or v ideo recording

: Take a photo or star t video recording , or stop video recor ding

: Media lib rary, enter to downloa d or view the video a nd photos stored on th e Micro SD card inse rted

in the aircr aft

1X

: Displays Cu rrent zoom factor o r adjust zoom

5. Intelligent Flight

Entering t he Intelligent Flig ht page, you can per form one-key automa tic take-off, landi ng, return, pointi ng

flight, o rbiting flig ht, route flight, S elfie, spiral fl ight, and shootin g in tripod mode an d aerial photogra phy

mode

： One-key take-off

： One-key landing

： One-key retu rn

： Route flight, including f light setting, map setti ng and historical ro utes

： Smart m ode, including no rmal follow, paralle l follow and locked follow

： Flying aro und the point

： Pointing flight

： Selfi e flight (vertic al selfie, custom ized selfie)

： Helical fligh t

： SAR mode

： Aerial mode

： Tripod

： Course lock

： Fixed wing

6. Image parameters and settings

: For more para meter settings of t he camera, click to s et the video or photo m odes, resolutio n, image

sizes, white b alance, styles, e tc

: Displays t he remaining capac ity of the SD card a nd the total capaci ty of the SD card

4K/3 0: The current vi deo resolution /frame rate in vide o mode, or the image s ize in photo mode

: Displays t he current ISO value

: Displays t he current shutte r parameters

7. Accessory module - megaphone and release-and-drop module

: Open the m egaphone funct ion, click to enter to u se real-time shouti ng or other functi ons

: Open the re lease-and-drop f unction, click to e nter the control mo dule to lock and unl ock

8. Small map window

: Displays t he aircraft posi tion in real time, cli ck to switch to the map in terface

9. Flight shortcuts

: One-key auto matic takeoff

: One-key auto matic landing

: One-key retu rn

4. Remote control setups

Remote cont rol calibrati on：Click "Calibr ate" on the remote cont rol setting inter face to enter the re mote

control c alibration inte rface, and follo w the correspond ing prompts to comp lete the calibrat ion.

Remote cont rol customizat ion： You can cu stomize the shor tcut function s of the correspo nding buttons

and knobs o n the remote contro l.

Reset remote c ontrol parameter s: Click to restore the def ault parameters of th e remote control.

Application upgrade

To upgrade the AP P through the Inter net, open the FIMI N avi2.0 APP, click "Upgrad e Now" to enter the

downloa d and upgrade inter face. *If there is a n ew version of the APP, the upgra de entry will po p up on

the first i nterface of the A PP.

5. Peripheral port/slot

HDMI

TX10 has the fu nction to conne ct to an external HDM I display, which can syn chronize the scree n image

to the displ ay in real time. The por t is a standard HDM I A type, which sup ports up to 1920* 1080@60f ps

image out put. The display w ith HDMI shoul d have the minimum 192 0*1080P reso lution display c apability.

SIM card

TX10 suppo rts 2G, 3G, 4G co mmunicatio n, and suppor ts SIM cards of Chi na Mobile, China U nicom and Chin a

Telecom. The SI M card slot is a stand ard nano card slot. T he specific su pported form ats are as follows:

Network

LTE -F DD B1/3/5/8

LTE -TD D B34 /38/39/40 /41

WCDMA B1/8

GSM/EDGE 900/1800MHz

SD/TF card

The memory card slot on the front of t he TX10 remote control supports re ading and

writi ng high-speed SD/TF c ards. Please pay atte ntion to the follo wing when using:

1. The memor y card should be ha ndled as gently as po ssible, and should n ot be dropped, bump ed,

pinched , etc. that could ca use damage; avoid get ting contact w ith heat, high hum idity, strong magne tic

field, st rong electric f ield.

2. When usin g a memory card, tr y to avoid directly t aking out the card.

3. It is best n ot to use the flash mem ory card to write or r ead data when the TX10 re mote controller is

about to ru n out of battery, or whe n the battery level i s low.

4. In the pr ocess of using the me mory card, make sure t here is enough remai ning card capaci ty.

5. Be aware of any p ossible virus in fection.

6. Try to avoid usin g any card with the TX10 re mote control if the c ard has been used on a dev ice that

does not me et the specifi cations.

7. After the syste m is refreshed and th e SD card is inserte d for the first tim e, when selectin g the memory

card sett ing from the drop- down menu, please s elect "For Por table Storage Dev ice", not "For Addit ional

Storage Sp ace, Format Memor y Card".

8. When ins erting a memo ry card with ba d blocks or an NTFS-fo rmatted memo ry card, select t he memory

card sett ing from the drop-d own menu, DON’T select “ For additional sto rage space”, please select “

For Portable Stora ge”, when “Is this SD card format ted?" opti on box pops up, please select "Form at

SD card". Please do not take out the memory card durin g the process of formatt ing, it may cause card

abnormal ity.

Audio jack

TX10 has audi o input and output f unction, the inter face is a standard 3 .5mm audio jack , and supports

external m icrophone audi o input.

WIFI

TX10 suppo rts 2.4G and 5G WiF i communicati on functions of 8 02.11 a/b/g/ n/ac standard protoc ol.

6. Operating system

Language selection at first boot

：Click to enter langu age selection ：Click to enter the main inter face

System desktop

1

2 3 4

1. Time

View the c urrent time.

2. USB

Connec t the computer via U SB cable to transfer f iles, and copy the f iles on the remote co ntrol to

the comp uter.

3. Network signal status indication

Displays t he network signal s trength after co nnecting to Wi-Fi o r inserting a SIM c ard. It can be

turned o n or off using the dro p-down menu or thro ugh system settings .

4. The battery level of the remote control

Displays t he remaining batte ry power of the cur rent remote control.

5

5. Search apps

Click to ente r the search bar.

6. Interface slider

When ther e are many applicati ons in the interfac e, pull down the slid er to display the remain ing

applic ations.

6

Quick Panel Interface

Pull down f rom the top of the scree n to enter the Quick Pane l interface.

Navigation bar

Swipe le ft on the far right si de of the screen to pop u p the navigation bar.

: Displays t he applicatio ns opened in the ba ckground, corre sponding to press ing and holding th e C1 button

for 1.5 seco nds; on this inter face, you can also c lose the APP by swipi ng it up

：Return to the main inter face, corres ponding to doubl e-pressing the C1 b utton

：Return to the previous m enu, correspo nding to press the C1 b utton

Install third-party apps

TX10 suppo rts installing t hird-party An droid apps throug h SD card and app store.

Notice： Too many An droid app downloa ds and installatio ns will affect th e smoothness of th e operation

of the devic e.

7. Firmware upgrade

Power on the re mote control, and make su re that remote contro l’s network con nection is norma l.

Open the FI MI Navi2.0 App, if the re mote control has a ver sion update, the upgr ade entry will po p

up in the stat us bar of the App inter face, click to ente r.

FIMI Navi2. 0 will download and u pgrade the firm ware by itself.

After th e upgrade is compl ete, the remote contro l will restart auto matically.

Not ice：

• When upgra ding, make sure that the ba ttery level of the rem ote control is at least 2 0%.

• The entire up grade process wil l take up to about 10 minute s (depending on the c onnection to the ne twork and the num ber of

firmware to b e upgraded). Please ensu re that the remote cont rol can access to t he Internet through out the upgrade p rocess.