Page 1
1
Remove the aluminium outer bag taking care not to damage
the clear inner bag.
Immediately use the resin after opening the aluminium outer
bag.
Attention:
Do not mix different types or brands of resins.
Take steps to prevent damage as a result of spilling resin.
Wear disposable gloves and process only in a well ventilated
room.
2
Remove the separator from the centre of the bag.
3
Mix contents by kneading vigorously for at least two
minutes.
Make certain all the resin compound is squeezed from the
corners and edges of the bag.
4
Pouring of the resin:
Cut a small edge from the bag.
Carefully pour the resin into the joint shell.
Empty (hardened) resin packs can be disposed as regular
waste material.
Mixing instruction resin package
Filoform B.V. – de Panoven 17 – P.O. box 2 – 4191 NW Geldermalsen (NL) – +31 (0)345 58 82 20 – [email protected] – www.filform.com
Loading...