Fike 10-055-3-C, 10-060-2-C, 10-055-2-C, 10-060-3-C Installation Manual

Expanded Enclosures

Installation Guide

THREE BAY

EXPANDED ENCLOSURE 10-055-3-C CHEETAH / SHP 10-060-3-C SHARK

TWO BAY

EXPANDED ENCLOSURE 10-055-2-C CHEETAH / SHP 10-060-2-C SHARK

Manual P/N: 06-185

Revision No: 1, 11/01

FIKE CORPORATION

Fike Corporation - Offices

Fike Corporation World Headquarters

704 South 10 P.O. Box 610 Blue Springs, Missouri 64013 U.S.A.

Ph: (816) 229-3405 Fax: (816) 229-5082

Fike Europe

Toekomstlaan 52 B-2200 Herentals Belguim

Ph: 011-32-14-210031 Fax: 011-32-14-210743

Street

Fike South East Asia

81, Loyang Way Singapore, 1750 Singapore

Ph: 011-65-545-1188 Fax: 011-65-545-2139

Fike Latina

Avenida Paulista 2202, 3°, cj34 Cerqueira Cesar, Sao Paulo Brazil, CEP 01310-300

Ph: 011-55-11-251-5244 Fax: 011-55-11-284-8479

Fike Canada

4140 Morris Drive Burlington, Ontario L7L 5L6 Canada

Ph: (905) 681-3100 Fax: (905) 681-3107

Fike United Kingdom

10-11 Enterprise Estate Moorfield Road P.O. Box 540 Guildford, Surrey GU1 1RB United Kingdom

Ph: 011-44-8700-777-540 Fax: 011-44-7000-777-540

This document may not be reproduced, in whole or in part, by any means without the prior express written permission of Fike Corporation.



Fike

is a registered trademark of Fike Corporation.

Disclaimers

The information contained in this manual is as accurate as currently possible. This manual is intended to be an aid to Fike authorized sales outlets, who have been trained in an approved manner by Fike, and the user who is a customer of the Fike authorized sales outlet. Fike does not warrant that this manual is technically correct, complete, or free from writing problems or that the Fike products referenced therein are free from minor flaws.

In accordance with our policy of continuing product and system improvement, Fike reserves the right to change designs or specifications without obligation and without further notice.

Reader Responses

Fike encourages input from our sales outlets and end users on how we can improve this manual and the products themselves. Please direct all calls of this nature to Fike’s Product Support Department at (816) 229-3405.

Any communication received becomes the property of Fike Corporation.

Warranties

Fike provides a one-year limited manufacturer's warranty on this product. The standard warranty is printed in each Marketing Price List. All warranty returns must be returned from an authorized Fike Sales outlet. Contact Fike's Marketing Department for further warranty information. Fike maintains a repair department that is available to repair and return existing electronic components or exchange/purchase previously repaired inventory component (advance replacement). All returns must be approved prior to return. A Material Return Authorization (MRA) number should be indicated on the box of the item being returned. Contact the appropriate Regional Sales Manager for further information regarding Material Return Procedures.

U.L. S2203 Expanded Enclosures Installation Guide Page i F.M. 3009544 Manual P/N: 06-185 Revision No: 1, 10/01

FIKE CORPORATION

Section Page

1.0 PREFACE......................................................................................................................................................1

1.1 About This Manual .....................................................................................................................1

1.2 Product Support .........................................................................................................................1

1.3 Revision History .........................................................................................................................1

1.4 Terms Used in this Manual ........................................................................................................1

1.5 Safety Notices ...........................................................................................................................2

2.0 PRODUCT OVERVIEW ............................................................................................................................... 3

2.1 Product Description....................................................................................................................3

2.2 Listings and Approvals ...............................................................................................................3

2.3 Agency Standards and Compliance....................................................................................... 3-4

2.4 Related Documentation..............................................................................................................4

2.5 Expanded Enclosure Features...................................................................................................4

3.0 EQUIPMENT PRODUCTS ............................................................................................................................5

3.1 Equipment/Products............................................................................................................... 5-7

3.2 Equipment/Products – Spare Parts............................................................................................8

3.3 Enclosure Specifications ...................................................................................................... 9-14

4.0 DESIGN .......................................................................................................................................................15

4.1 Identify Local Code Requirements...........................................................................................15

4.2 Identify Specification and End-User Customer Requirements ................................................15

4.3 Ensure Proper Mounting Location ...........................................................................................15

5.0 INSTALLATION ..........................................................................................................................................17

5.1 Install Backbox/Enclosure ........................................................................................................17

5.2 Install Mounting Plates .............................................................................................................18

5.3 Install Miscellaneous Labeling .................................................................................................19

5.4 Install Internal Electronic Assemblies ................................................................................ 20-23

U.L. S2203 Expanded Enclosures Installation Guide Page ii F.M. 3009544 Manual P/N: 06-185 Revision No: 1, 11/01

FIKE CORPORATION PREFACE

1.0 PREFACE

1.1 ABOUT THIS MANUAL

This manual is intended to be a complete reference for the overview and installation of the Fike Expanded Enclosures. For specific instructions regarding wiring, refer to the specific Control Panel Manual. This manual is intended for the designer and installer.

Before you refer to any section in this manual, and before you attempt to install or use the Fike electronic hardware, be sure to read the important User Information that follows this explanation.

1.2 PRODUCT SUPPORT

If you have a question or encounter a problem not covered in this manual, you should first try to contact the sales outlet that sold the protection system. Fike has a worldwide distribution network. Each sales outlet sells, installs, and services Fike equipment. Look on the inside door, left-side, there should be a sticker with an indication of the sales outlet who sold the system. If you can not locate the sales outlet, please call Fike Customer Service for locating your nearest sales outlet, or go to our web-site at www.fike.com. If you are unable to contact your installing sales outlet or you simply do not know who installed the system you can contact Fike Product Support at (816) 229-3405, Monday through Friday, 8:00 a.m. to 5:00 p.m. CST.

1.3 REVISION HISTORY

Document Title: Fike Expanded Enclosure Installation Guide

Document Reorder Number: 06-185

Revision Section Date Reason for Change

0 All Sections 02 / 01 Initial Release 1 All Sections 09 / 01 Added Shark Information

1.4 TERMS USED IN THIS MANUAL

The following terminology is used frequently in this manual:

Term Description

Non-Power Limited A circuit designation given for wiring purposes. The amount of current

flowing through the circuit is unlimited vs. being limited, or power-limited.

Power Limited A circuit designation given for wiring purposes. The amount of current

flowing through the circuit is limited vs. being unlimited, or non-power limited.

Press Stud The backbox, door, and mounting plates all have 6-32 thread mounting studs

installed into the metal at appropriate mounting locations. This provides a sturdy location for securing the equipment.

Stand-off An aluminum or metal extension piece to provide spacing between mounting

assemblies. Fike chooses a 6-32 thread for its stand-off spacers. The pieces are typically referred to by the type of connection at each end of the part:

Male (M) – extension spacer with threaded screw end for use with connecting hex nut or female end of an additional standoff

Female (F) – extension spacer with threaded insert end for use with connecting to press stud or male end of an additional spacer.

U.L. S2203 Expanded Enclosures Installation Guide Page 1 of 23 F.M. 3009544 Manual P/N: 06-185 Revision No: 1, 11/01

PREFACE FIKE CORPORATION

1.5 SAFETY NOTICES

Be certain to read all the following caution before installing or using this device. Accidental damage to the device could result if this caution is not heeded!

CAUTION: The Expanded Enclosures are intended for mounting Fike manufactured

electronics control systems. This manual refers to only the mounting hardware, but electronics are frequently shipped with the mounting hardware. Each electonic control board contains static sensitive components. Handle the module by the edges only and avoid touching the integrated components. Keep the module in the protective static bags it was shipped in until time for installation. Always ground yourself with a proper wrist strap before handling the module(s). If the installer is grounded at all times, damage due to static discharge will not occur. If the module requires repair or return to Fike, it must be shipped in an anti-static bag.

Page 2 of 23 Expanded Enclosures Installation Guide U.L. S2203 Revision No: 1, 11/01 Manual P/N 06-185 F.M. 3009544

FIKE CORPORATION OVERVIEW

(

)

(

)

2.0 PRODUCT OVERVIEW

2.1 PRODUCT DESCRIPTION

The Fike Expanded Enclosures, P/N 10-055-2-C (-3-C) and P/N 10-060-2-C (-3-C) provide two “standard” panel enclosure sizes for the Cheetah, Shark and SHP Control Systems. Additional hardware is also available to provide mounting for the Cheetah/VESDA HLI, VESDA LaserCompact, Addressable Modules, and Batteries.

15.25”

38.74 cm

Three Bay

Enclosure

P/N 10-055-3-C

10-060-3-C

43.0”

109.22 cm

2.2 LISTINGS AND APPROVALS

Approval Agency File Number Underwriters Laboratories S2203 Factory Mutual (FM) 3009544 California State Fire Marshall (CSFM) Planned City of New York (MEA) Red Enclosures Only 0101057

15.25”

(38.74 cm)

29.0”

(73.66 cm)

Two Bay

Enclosure

P/N 10-055-2-C

10-060-2-C

2.3 AGENCY STANDARDS AND COMPLIANCE

This Fire Alarm Control Panel complies with the following NFPA standards:

NFPA 1 – Fire Prevention Code NFPA 13 – Sprinkler Systems NFPA 25 – Water-Based Fire Protection Systems NFPA 70 – National Electrical Code, Article 300 Wiring Methods NFPA 70 – National Electrical Code, Article 760 Fire Protective Signaling Systems NFPA 72 – National Fire Alarm Code NFPA 77 – Static Electricity NFPA 101 – Life Safety Code NFPA 110 – Emergency Standby Power Systems

U.L. S2203 Expanded Enclosures Installation Guide Page 3 of 23 F.M. 3009544 Manual P/N: 06-185 Revision No: 1, 11/01

+ 21 hidden pages