Fiil Canviis Pro Instructions Manual

The Art of Audio

C A V I I S P r o

1 2

Health and safety

•

Do not use the product in case it is apparently

damaged;

•

Do not use the product at a high volume level
for an extended period of time;

•

Do not use the product while driving or being
engaged in activities that require full concentration;

•

Keep the product, its packaging and accessories
out of the reach of children and pets to avoid
choking hazard;

•

Keep the product away from medical devices
that may be a󽗈ected by magnetic 󽗉eld, such
as an implanted cardiac pacemaker.

Product care

•

Keep this product dry and at room temperature,
avoid long time exposure to high temperature
or humidity environments;

•

Use accessories only provided by 󽗉il;

•

Excessive signal level may cause damaging

overload;

•

Clean the product only with dry and soft cloth.

Battery warning!

The product uses lithium polymer battery. Improper
usage may lead to the risk of 󽗉re or burn. Please
use the charger only supplied by quali󽗉ed
manufacturer (recommended output: voltage
5V, current>500mA) or charge the product via
PC USB port.

Please read the following safety instructions carefully before using this product.
Please make sure to include these safety instructions with the product when deliver
to a third party.

Important Safety Instructions

Speci󽗉cation and disclaimer

•

The product is designed for portable devices
and high 󽗉delity systems;

•

Any usage other than those speci󽗉ed in user
manual is deemed as misuse;

•

Please note that 󽗉il will accept no responsibility
for any loss incurred by inappropriate misuse.

*‘󽗉il’/󽗉l/ is a registered trademark(TM) of
Fengfan (Beijing) Technology Co., Ltd. “Made
for iPod,”“Made for iPhone,” and “Made for
iPad” mean that an electronic accessory has
been designed to connect speci󽗉cally to iPod,
iPhone, or iPad, respectively, and has been
certi󽗉ed by the developer to meet Apple
performance standards.

Apple is not responsible for the operation of this
device or its compliance with safety and
regulatory standards. Please note that the use
of this accessory with iPod, iPhone, or iPad may
a󽗈ect wireless performance.

iPad, iPhone, iPod, iPod classic, iPod nano, iPod
touch, and Retina are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad
Air, and iPad mini are trademarks of Apple Inc.
Made for iPhone 6 plus, iPhone 6, iPhone 5s,
iPhone 5c, iPhone 5, iPhone 4s, iPad Air 2, iPad
mini 3, iPad Air, iPad mini 2, iPad mini, iPad (3rd
and 4th generation), iPad 2, iPod touch (5th
generation).

3 4

Status/Battery indicator
MFB (Multi function Button)
My AudioFiilter button （MAF）
Audio jack
Micro USB connector
Touch control panel

Main User Interfaces

1

2

3

4

5

1
2

4

3

5
6

6

Brand new Fiil Canviis Pro headphone automatically goes into Bluetooth pairing mode once switched
on (press and hold the MFB until the battery indicator lights up), the Fiil light will continue to blink . To
pair with second device for paired headphone, press and hold the MFB until the Fiil light blinks (voice
prompts “Pairing”) when the headphone is o󽗈 to enter pairing mode again.

Fiil+ APP wizard connection: Please scan the QR code on page 5 to download 󽗉il+ APP and connect
as instructed;
Manual connection: Make sure headphone is in pairing mode, then enter setup menu of audio source
devices, select “search device” in “Bluetooth” then select “FIIL Canviis Pro” in the device list to
connect.

Use the audio cable that comes with the headphone to connect Canviis Pro to audio source devices.

Press up/down and hold MAF to enter Local Mode, use built-in HD audio player to play music stored
in internal memory.

Bluetooth Mode

(Please ensure the headphone is put on correctly otherwise phone call functionalities
may be a󽗈ected!)

(Capable to connect with two Bluetooth devices simultaneously)

STEP1 Pairing

STEP2 Connection

Wired Mode

Local Mode (Refer to Page 9)

Fiil+, Make Your Canviis Pro Smarter

5 6

One-key listening: Short press the MFB to play and
pause (when Bluetooth is connected).
On/O󽗈: Long press the MFB until the green/red status
light is on.
Initiate reconnection: When Bluetooth device is paired
but not connected, short press the MFB to send connection
request.

Check Battery Level: Double press the MFB
Switch the Fiil light on/o󽗈: Triple press the MFB
Voice search: When Bluetooth is connected, Medium

Press the MFB (hold for 2 seconds before releasing)
Answer/End call: Short press the MFB to answer or
hang up(when Bluetooth is connected)
Reject incoming call: Medium press the MFB (when
Bluetooth is connected)

Convenient Multi function Button (MFB)

Features such as Firmware upgrade, Function Deployment and Sound-E󽗈ect Setup are all available
in 󽗉il+. Scan the QR code to install now.

（“Headphone Con󽗉guration” is only available when Bluetooth connected)