fifthplay 98-401 User Manual

1. INTRODUCTION 2

2. PACKAGE CONTENTS 2

3. SPECIFICATIONS 3

4. CHOOSING A SUITABLE LOCATION FOR THE SMOKE DETECTORS 4

5. INSTALLATION AND ACTIVATION 5

6. ALARM SIGNALS AND VISUAL INDICATION 9

7. SERVICE LIFE AND FUNCTIONAL TEST 10

8. FEDERAL COMMUNICATIONS COMMISSION STATEMENT 10

9. LIMITED PRODUCT WARRANTY 10

10. FAQ 11

11. C O N TA C T 11

12. DISTRIBUTOR 11

SMART
SMOKE DETECTOR

USER MANUAL

SMART SMOKE DETECTOR USER MANUAL

2

1. INTRODUCTION

This smart smoke detector is a Z-Wave™ device (interoperable, with RF mesh network technology which works in
two directions) and is compatible with every Z-Wave™ network and the related security framework. Each device driven
by Z-wave™ functions as a signal amplier, so that multiple devices ensure a greater number of transition routes,
which help to eliminate "RF dead spots". Z-Wave™ devices with the Z-Wave™ logo can also be used for this, regardless
of the manufacturer. Furthermore, our devices can also be used in Z-Wave™ networks of other manufacturers.

2. PACKAGE CONTENTS

Smoke detector

1x

1x

Mounting kit

1x

1x

Battery

1x

1x

Quick start guide

1x

1x

SMART SMOKE DETECTOR USER MANUAL

3

3. SPECIFICATIONS

PRODUCT IDENTIFICATION

Fifthplay Product ID 98-401

DIMENSIONS

Diameter 120 mm

Depth 5.3 mm

INTERFACES

Test button

Alarm volume 85dB from a 3m distance

POWER CONSUMPTION

Battery power 3V Lithium

RF COMMUNICATION

Protocol Z-Wave™ (ZM5202N)

Frequency range 868.42 MHz (ZS6101/6102EU-5)

CONTROL PARAMETERS

Temperature 0 – +49°C

Relative humidity 10 – 95%

Action radius 30 m

CURRENT STANDARD

EN14604:2005
1172-CPR-150476/01

ZWAVE COMMAND CLASSES

COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_BATTERY
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_NOTIFICATION_V4
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_SECURITY
COMMAND_CLASS_SWITCH_BINARY (for ZS6102 only)
COMMAND_CLASS_VERSION_V2
COMMAND_CLASS_WAKE_UP (for ZS6101 only)
COMMAND_CLASS_ZWAVEPLUS_INFO

SMART SMOKE DETECTOR USER MANUAL

4

4. CHOOSING A SUITABLE LOCATION FOR THE SMOKE DETECTORS

 DO

 Install a smoke detector in every staircase, hallway, bedroom and living space for optimum safety.
 Mount the smoke detector in the centre of the ceiling as much as possible. If this is not possible, install

the smoke detector at least 10 cm away from every wall or corner.

 If the installation on the ceiling is not possible, mount the smoke detector on the wall,

at approximately 10 to 15 cm from the ceiling.

 DON’T

 Rooms in which strong water damp, dust or smoke arise under normal conditions.
 Close to replaces or open res.
 Close to ventilation ducts where the air ow might prevent smoke to reach the smoke detector.
 Close to uorescent or economy lamps. The starter of these lamps might cause a false alarm due to the

electric elds.

SMOKE DETECTORS FOR MINIMUM SAFETY

SMOKE DETECTORS FOR OPTIMUM SAFETY

SMOKE DETECTORS FOR MINIMUM SAFETY

SMOKE DETECTORS FOR OPTIMUM SAFETY