FIC MR031 User Manual

1

FIC
MR031
User Guide

Notebook User Guide

2

Copyright©2007

All Rights Reserved - Printed in Taiwan

Notebook Computer User Guide

Original Issue: 2007/10

This manual guides you in setting up and using your new notebook computer.

Information in this manual has been carefully checked for accuracy and is

subject to change without notice.

No part of this manual may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, photocopy,

recording, or otherwise, without prior written permission.

Trademarks

Product names used herein are for identification purposes only and may be the

trademarks of their respective companies.

Microsoft, Windows XP, Windows MCE, Windows Vista, and Windows

Sound System are trademarks of Microsoft Corporation.

Intel ®, Intel® Core

TM

2 Duo, Intel ® HD Audio (Azalia) are registered

trademark of Intel Corporation.

Sound Blaster, Sound Blaster Pro are trademarks of Creative Technology.

All other brands or product names mentioned in this manual are trademarks or

registered trademarks of their respective companies.

Notebook User Guide

3

FCC Information to User

Safety and Care Instructions

No matter what your level of experience with computers, please make sure you

read the safety and care instructions. This information can help protect you

and your computer from possible harm.

For Safety Regulation:

z Risk of explosion if battery is replaced by an incorrect type.

z For electrical safety concerns, only use telephone cables rated

26AWG or higher.

z The Optical drive is a Class 1 Laser Product.

z Li-Ion battery is vulnerable, do not charge it with other power

adapter, or it may cause fire or explosion.

z For the power supply of this equipment,

 An approved power cord has to be used.

 Make sure the socket and any extension cord(s) you use can

support the total current load of all the connected devices.

 Before cleaning the computer, make sure it is disconnected

from any external power supplies (i.e. AC adapter).

Radio and television interference

Warning: Use the specified shielded power cord and shielded signal cables

with this computer, so as not to interfere with radio and television reception. If

you use other cables, it may cause interference with radio and television

reception.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

Notebook User Guide

4

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does not cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encourage to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

You may find helpful the following booklet, prepared by the Federal

Communications Commission: Interference Handbook (stock number 004-

000-00345-4). This booklet is available from the U.S. Government Printing

Office, Washington, DC20402

Warning: The user must not modify or change this computer without

approval. Modification could void authority to this equipment.

Canadian Department of Communications Compliance
Statement

This Class B digital apparatus meets all requirement of the Canadian

Interference-Causing Equipment Regulations.

Shielded Cables Notice

All connections to other computing devices must be made using shielded

cables to maintain compliance with FCC regulations.

Notebook User Guide

5

Peripheral Devices Notice

Only peripherals (input/output devices, terminals, printers, etc) certified to

comply with Class B limits may be attached to this equipment. Operation with

non-certified peripherals is likely to result in interference to radio and TV

reception.

Optical Disk Drive Notice

The optical disk drive is Class 1 Laser Product.

Caution

Changes or modifications not expressly approved by the manufacturer may

void the user’s authority, which is granted by the Federal Communications

Commission, to operate this computer.

Use Conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to the

following conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesired operation.

Warranty requirement in the manual: Along with the user

documentation the importer/distributor must provide a statement that

warranty services are included in the responsibilities of the distributor

representative.

Canada (see also United States)

Canada Radio Frequency Interference Requirements

This Class B digital apparatus complies with Canadian ICES-003, Issue 2, and

RSS-210, Issue 4 (Dec. 2000).

Notebook User Guide

6

“To prevent radio interference to the licensed service, this device is intended

to be operated indoors and away from windows to provide maximum

shielding. Equipment (or its transmit antenna) that is installed outdoors is

subject to licensing.”

Cet appareil numérique de la classe B est conforme à la norme NMB-003, No.

2, et CNR-210, No. 4 (Dec. 2000).

« Pour empêcher que cet appareil cause du brouillage au service faisant l'objet

d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin des

fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son

antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence. »

Regulatory Information
Intel(R) Wireless WiFi Link 4965AGN
Intel(R) Wireless WiFi Link 4965AG_

Intel(R) Wireless WiFi Link 4965AGN and Intel(R)

Wireless WiFi Link 4965AG_

The information in this document applies to the following products:

Quad-mode wireless LAN adapters (802.11a/802.11b/802.11g/802.11n)

Intel(R) Wireless WiFi Link 4965AGN (model WM4965AGN)

Tri-mode wireless LAN adapters (802.11a/802.11b/802.11g)

Intel(R) Wireless WiFi Link 4965AG_ (model WM4965AG_)

7 NOTE: Due to the evolving state of regulations and standards in the

wireless LAN field (IEEE 802.11 and similar standards), the information

provided herein is subject to change. Intel Corporation assumes no

responsibility for errors or omissions in this document. Nor does Intel

make any commitment to update the information contained herein.

Information for the user

Notebook User Guide

7

Safety Notices

The FCC with its action in ET Docket 96-8 has adopted a safety standard for
human exposure to radio frequency (RF) electromagnetic energy emitted by
FCC certified equipment. The Intel(R) Wireless WiFi Link 4965AGN or
Intel(R) Wireless WiFi Link 4965AG_adapter meet the Human Exposure
limits found in OET Bulletin 65, supplement C, 2001, and ANSI/IEEE C95.1,

1992. Proper operation of this radio according to the instructions found in this
manual will result in exposure substantially below the FCC’s recommended
limits.

The following safety precautions should be observed:

z Do not touch or move antenna while the unit is transmitting or receiving.
z Do not hold any component containing the radio such that the antenna is

very close or touching any exposed parts of the body, especially the face or
eyes, while transmitting.

z Do not operate the radio or attempt to transmit data unless the antenna is

connected; if not, the radio may be damaged.

z Use in specific environments:

Ö The use of wireless devices in hazardous locations is limited by the

constraints posed by the safety directors of such environments.

Ö The use of wireless devices on airplanes is governed by the Federal

Aviation Administration (FAA).

Ö The use of wireless devices in hospitals is restricted to the limits set

forth by each hospital.

z Antenna use:

Ö In order to comply with FCC RF exposure limits, low gain integrated

antennas should be located at a minimum distance of 20 cm (8 inches)
or more from the body of all persons.

Ö High-gain, wall-mount, or mast-mount antennas are designed to be

professionally installed and should be located at a minimum distance
of 30 cm (12 inches) or more from the body of all persons. Please
contact your professional installer, VAR, or antenna manufacturer for
proper installation requirements.

z Explosive Device Proximity Warning (see below)

Notebook User Guide

8

z Antenna Warning (see below)

z Use on Aircraft Caution (see below)

z Other Wireless Devices (see below)

z Power Supply (Access Point) (see below)

Explosive Device Proximity Warning

Warning: Do not operate a portable transmitter (such as a wireless

network device) near unshielded blasting caps or in an explosive environment
unless the device has been modified to be qualified for such use.

Antenna Warnings

Warning: To comply with the FCC and ANSI C95.1 RF exposure limits, it

is recommended for the Intel(R) Wireless WiFi Link 4965AGN or Intel(R)
Wireless WiFi Link 4965AG_ adapter installed in a desktop or portable
computer, that the antenna for this device be installed so as to provide a
separation distance of at least 20 cm (8 inches) from all persons and that the
antenna must not be co-located or operating in conjunction with any other
antenna or radio transmitter. It is recommended that the user limit exposure
time if the antenna is positioned closer than 20 cm (8 inches).

Warning: Intel(R) PRO/Wireless LAN products are not designed for use
with high-gain directional antennas. Use of such antennas with these products
is illegal.

Use On Aircraft Caution

Caution: Regulations of the FCC and FAA prohibit airborne operation of

radio-frequency wireless devices because their signals could interfere with
critical aircraft instruments.

Notebook User Guide

9

Other Wireless Devices

Safety Notices for Other Devices in the Wireless Network: See the

documentation supplied with wireless Ethernet adapters or other devices in

the wireless network.

Local Restrictions on 802.11a, 802.11b, 802.11g and 802.11n Radio Usag

Caution: Due to the fact that the frequencies used by 802.11a, 802.11b,

802.11g and 802.11n wireless LAN devices may not yet be harmonized in all
countries, 802.11a, 802.11b, 802.11g and 802.11n products are designed for
use only in specific countries, and are not allowed to be operated in countries
other than those of designated use. As a user of these products, you are
responsible for ensuring that the products are used only in the countries for
which they were intended and for verifying that they are configured with the
correct selection of frequency and channel for the country of use. The device
transmit power control (TPC) interface is part of the Intel(R)
PROSet/Wireless software. Operational restrictions for Equivalent Isotropic
Radiated Power (EIRP) are provided by the system manufacturer. Any
deviation from the permissible power and frequency settings for the country
of use is an infringement of national law and may be punished as such.

For country-specific information, see the additional compliance information

supplied with the product.

Wireless interoperability

The Intel(R) Wireless WiFi Link 4965AGN or Intel(R) Wireless WiFi Link
4965AG_ is designed to be interoperable with other wireless LAN products
that are based on direct sequence spread spectrum (DSSS) radio technology
and to comply with the following standards:

z IEEE Std. 802.11b compliant Standard on Wireless LAN

z IEEE Std. 802.11g compliant Standard on Wireless LAN

z IEEE Std. 802.11a compliant Standard on Wireless LAN

Notebook User Guide

10

z IEEE Std. 802.11n compliant Standard on Wireless LAN

z Wireless Fidelity (WiFi) certification, as defined by the Wi-Fi Alliance

The Intel(R) Wireless WiFi Link 4965AGN adapter

The Intel(R) Wireless WiFi Link 4965AGN or Intel(R) Wireless WiFi Link

4965AG_ adapter, like other radio devices, emits radio frequency

electromagnetic energy. The level of energy emitted by this device, however, is

less than the electromagnetic energy emitted by other wireless devices such as

mobile phones. The Intel(R) Wireless WiFi Link 4965AGN or Intel(R)

Wireless WiFi Link 4965AG_ adapter wireless device operates within the

guidelines found in radio frequency safety standards and recommendations.

These standards and recommendations reflect the consensus of the scientific

community and result from deliberations of panels and committees of

scientists who continually review and interpret the extensive research literature.

In some situations or environments, the use of the Intel(R) Wireless WiFi Link

4965AGN or Intel(R) Wireless WiFi Link 4965AG_ adapter may be restricted

to:

z Using the Intel(R) Wireless WiFi Link 4965AGN or Intel(R) Wireless WiFi

Link 4965AG_ adapter equipment on board airplanes, or

z Using the adapter equipment in any other environment where the risk of

interference with other devices or services is perceived or identified as
being harmful.

If you are uncertain of the policy that applies to the use of wireless devices in a
specific organization or environment (an airport, for example), you are
encouraged to ask for authorization to use the Intel(R) Wireless WiFi Link
4965AGN or Intel(R) Wireless WiFi Link 4965AG_ wireless devices before
you turn it on.

Regulatory Information

Information for the OEMs and Integrators

The following statement must be included with all versions of this document

Notebook User Guide

11

supplied to an OEM or integrator but should not be distributed to the end user

z This device is intended for OEM integrators only.

z This device cannot be co-located with any other transmitter.

z Please See the full Grant of Equipment document for other restrictions.

z This device must be operated and used with a locally approved access point.

Information To Be Supplied to the End User by the OEM or

Integrator

The following regulatory and safety notices must be published in

documentation supplied to the end user of the product or system

incorporating an Intel(R) Wireless WiFi Link 4965AGN or Intel(R) Wireless

WiFi Link 4965AG_ in compliance with local regulations. Host system must

be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on

label.

The Intel(R) Wireless WiFi Link 4965AGN or Intel(R) Wireless WiFi Link

4965AG_ wireless network device must be installed and used in strict

accordance with the manufacturer's instructions as described in the user

documentation that comes with the product. For country-specific approvals,

see Radio approvals. Intel Corporation is not responsible for any radio or

television interference caused by unauthorized modification of the devices

included with the Intel(R) Wireless WiFi Link 4965AGN or Intel(R) Wireless

WiFi Link 4965AG_ adapter kit, or the substitution or attachment of

connecting cables and equipment other than that specified by Intel

Corporation. The correction of interference caused by such unauthorized

modification, substitution or attachment is the responsibility of the user. Intel

Corporation and its authorized resellers or distributors are not liable for any

damage or violation of government regulations that may arise from the user

failing to comply with these guidelines.

Local Restriction of 802.11a, 802.11b, 802.11g, and 802.11n Radio Usage

The following statement on local restrictions must be published as part of the

compliance documentation for all 802.11a, 802.11b, 802.11g and 802.11n

products.

Notebook User Guide

12

Caution: Due to the fact that the frequencies used by 802.11a, 802.11b,

802.11g and 802.11n wireless LAN devices may not yet be harmonized in all
countries, 802.11a, 802.11b, 802.11g and 802.11n products are designed for use
only in specific countries, and are not allowed to be operated in countries other
than those of designated use. As a user of these products, you are responsible
for ensuring that the products are used only in the countries for which they
were intended and for verifying that they are configured with the correct
selection of frequency and channel for the country of use. Any deviation from
permissible settings and restrictions in the country of use could be an
infringement of national law and may be punished as such.

FCC Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 5.15 to 5.25
GHz frequency range. FCC requires this product to be used indoors for the
frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems. High power radars are
allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz
bands. These radar stations can cause interference with and /or damage this
device.

z This device is intended for OEM integrators only.

z This device cannot be co-located with any other transmitter.

USA—Federal Communications Commission (FCC)

This device complies with Part 15 of the FCC Rules. Operation of the device is
subject to the following two conditions:

z This device may not cause harmful interference,and

z This device must accept any interference that may cause undesired

operation.

Notebook User Guide

13

NOTE: The radiated output power of the Intel(R) Wireless WiFi Link
4965AGN or Intel(R) Wireless WiFi Link 4965AG_ adapter wireless network
device is far below the FCC radio frequency exposure limits. Nevertheless, the
Intel(R)Wireless WiFi Link 4965AGN or Intel(R) Wireless WiFi Link
4965AG_ adapter wireless device should be used in such a manner that the
potential for human contact during normal operation is minimized. To avoid
the possibility of exceeding the FCC radio frequency exposure limits, you
should keep a distance of at least 20 cm between you (or any other person in
the vicinity) and the antenna that is built into the computer.

Interference statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy. If the equipment is not installed and used in accordance with
the instructions, the equipment may cause harmful interference to radio
communications. There is no guarantee, however, that such interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception (which can be determined by
turning the equipment off and on), the user is encouraged to try to correct the
interference by taking one or more of the following measures:

z Reorient or relocate the receiving antenna.

z Increase the distance between the equipment and the receiver.

z Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

z Consult the dealer or an experienced radio/TV technician for help.

NOTE: The Intel(R) Wireless WiFi Link 4965AGN or Intel(R) Wireless
WiFi Link 4965AG_ adapter wireless network device must be installed and
used in strict accordance with the manufacturer's instructions as described in
the user documentation that comes with the product. Any other installation or
use will violate FCC Part 15 regulations.

Underwriters Laboratories Inc. (UL) Regulatory Warning

Notebook User Guide

14

For use in (or with) UL Listed personal computers or compatible.

Brazil

Este equipamento opera em caráter secundário, isto é, não tem direito a
proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e
não pode causar interferência a sistemas operando em caráter primário.

Canada—Industry Canada (IC)

This device complies with RSS210 of Industry Canada.

Caution: When using IEEE 802.11a wireless LAN, this product is

restricted to indoor use due to its operation in the 5.15- to 5.25-GHz
frequency range. Industry Canada requires this product to be used indoors for
the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for
harmful interference to co-channel mobile satellite systems. High power radar
is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz
bands. These radar stations can cause interference with and/or damage to this
device.

The maximum allowed antenna gain for use with this device is 6dBi in order to
comply with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85GHz
frequency range in point-to-point operation.

This Class B digital apparatus complies with Canadian ICES-003, Issue 4, and
RSS-210, No 4 (Dec 2000) and No 5 (Nov 2001).

Cet appariel numérique de la classe B est conforme à la norme NMB-003, No.
4, et CNR-210, No 4 (Dec 2000) et No 5 (Nov 2001).

"To prevent radio interference to the licensed service, this device is intended to
be operated indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing."

« Pour empêcher que cet appareil cause du brouillage au service faisant l'objet

Notebook User Guide

15

d'une licence, il doit être utilisé a l'intérieur et devrait être placé loin des
fenêtres afinde fournir un écran de blindage maximal. Si le matériel (ou son
antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence. »

Europe Frequency Bands

2.400 - 2.4835 GHz (Europe ETSI)

5.15 - 5.35 GHz and 5.47-5.725 GHz (Europe ETSI)
Low band 5.25 - 5.35 GHz is for indoor use only

5.47 - 5.725 GHz is current not allowed in Czech Republic and France

Notebook User Guide

16

Declaration of Conformity

This equipment complies with the essential requirements of the European
Union directive 1999/5/EC.

Notebook User Guide

17

France

Pour la France métropolitain

2.400 -2. 4835 GHz (canaux 1 à 13) autorisé en usage intérieur

2.400 - 2.454 GHz (canaux 1 à 7) autorisé en usage extérieur

Pour la Guyane et la Réunion

2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage intérieur

2.420 - 2.4835 GHz (canaux 5 à 13) autorisé en usage extérieur

Italy

A general authorization is requested for outdoor use in Italy

Notebook User Guide

18

The use of these equipments is regulated by:

1. D.L.gs 1.8.2003, n. 259, article 104 (activity subject to general authorization)

for outdoor use and article 105 (free use) for indoor use, in both cases for
private use.

2. D.M. 28.5.03, for supply to public of RLAN access to networks and

telecom services.

L’uso degli apparati è regolamentato da:

1. D.L.gs 1.8.2003, n. 259, articoli 104 (attività soggette ad autorizzazione

generale) se utilizzati al di fuori del proprio fondo e 105 (libero uso) se
utilizzati entro il proprio fondo, in entrambi i casi per uso private.

2. D.M. 28.5.03, per la fornitura al pubblico dell’accesso R-LAN alle reti e ai

servizi di telecomunicazioni.

Latvia

A license is required for outdoor use for operation in 2.4 GHz band.

Japan

Indoor use only.

Korea

Taiwan

Notebook User Guide

19

Radio Approvals

To determine whether you are allowed to use your wireless network device in a
specific country, please check to see if the radio type number that is printed on
the identification label of your device is listed in the manufacture OEM
Regulatory Guidance document.

Intel(R) PRO/Wireless 3945ABG Network Connection and
the Intel(R)PRO/Wireless 3945BG Network Connection

The information in this document applies to the following products:

Tri-mode wireless LAN adapters (802.11a/802.11b/802.11g )

Intel(R) PRO/Wireless 3945ABG Network Connection (model

WM3945ABG)

Dual-mode wireless LAN adapters (802.11b/802.11g )

Intel(R) PRO/Wireless 3945BG Network Connection (model WM3945BG)

Note Due to the evolving state of regulations and standards in the wireless
LAN field (IEEE 802.11 and similar standards), the information provided
herein is subject to change. Intel Corporation assumes no responsibility for
errors or omissions in this document. Nor does Intel make any commitment to
update the information contained herein.

Notebook User Guide

20

Information for the user

Safety Notices

The FCC with its action in ET Docket 96-8 has adopted a safety standard for
human exposure to radio frequency (RF) electromagnetic energy emitted by
FCC certified equipment. The Intel(R) PRO/Wireless 3945ABG Network
Connection adapter or the Intel(R) PRO/Wireless 3945BG Network
Connection adapter meet the Human Exposure limits found in OET Bulletin
65, supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of
this radio according to the instructions found in this manual will result in
exposure substantially below the FCC’s recommended limits.

The following safety precautions should be observed:

z Do not touch or move antenna while the unit is transmitting or receiving.
z Do not hold any component containing the radio such that the antenna is

very close or touching any exposed parts of the body, especially the face or
eyes, while transmitting.

z Do not operate the radio or attempt to transmit data unless the antenna is

connected; if not, the radio may be damaged.

z Use in specific environments:

Ö The use of wireless devices in hazardous locations is limited by the

constraints posed by the safety directors of such environments.

Ö The use of wireless devices on airplanes is governed by the Federal

Aviation Administration (FAA).

Ö The use of wireless devices in hospitals is restricted to the limits set

forth by each hospital.

z Antenna use:

Ö In order to comply with FCC RF exposure limits, low gain integrated

antennas should be located at a minimum distance of 20 cm (8 inches)
or more from the body of all persons.

Ö High-gain, wall-mount, or mast-mount antennas are designed to be

professionally installed and should be located at a minimum distance
of 30 cm (12 inches) or more from the body of all persons. Please
contact your professional installer, VAR, or antenna manufacturer for
proper installation requirements.

Notebook User Guide

21

z Explosive Device Proximity Warning (see below)

z Antenna Warning (see below)

z Use on Aircraft Caution (see below)

z Other Wireless Devices (see below)

z Power Supply (Access Point) (see below)

Explosive Device Proximity Warning

Warning: Do not operate a portable transmitter (such as a wireless

network device) near unshielded blasting caps or in

an explosive environment

unless the device has been modified to be qualified for such use.

Antenna Warnings

Warning: To comply with the FCC and ANSI C95.1 RF exposure limits, it

is recommended for the Intel(R) PRO/Wireless 3945ABG Network
Connection adapter or the Intel(R) PRO/Wireless 3945BG Network
Connection adapter installed in a desktop or portable computer, that the
antenna for this device be installed so as to provide a separation distance of al
least 20 cm (8 inches) from all persons and that the antenna must not be co­located or operating in conjunction with any other antenna or radio transmitter.
It is recommended that the user limit exposure time if the antenna is
positioned closer than 20 cm (8 inches).

Warning: Intel(R) PRO/Wireless LAN products are not designed for use
with high-gain directional antennas. Use of such antennas with these products
is illegal.

Use On Aircraft Caution

Caution: Regulations of the FCC and FAA prohibit airborne operation of

radio-frequency wireless devices because their signals could interfere with
critical aircraft instruments.

Notebook User Guide

22

Other Wireless Devices

Safety Notices for Other Devices in the Wireless Network: See the

documentation supplied with wireless Ethernet adapters or other devices in
the wireless network.

Local Restrictions on 802.11a, 802.11b, and 802.11g Radio Usage

Caution: Due to the fact that the frequencies used by 802.11a, 802.11b

and 802.11g wireless LAN devices may not yet be harmonized in all countries,

802.11a, 802.11b, and 802.11g products are designed for use only in specific
countries, and are not allowed to be operated in countries other than those of
designated use. As a user of these products, you are responsible for ensuring
that the products are used only in the countries for which they were intended
and for verifying that they are configured with the correct selection of
frequency and channel for the country of use. The device transmit power
control (TPC) interface is part of the Intel(R) PROSet/Wireless software.
Operational restrictions for Equivalent Isotropic Radiated Power (EIRP) are
provided by the system manufacturer. Any deviation from the permissible
power and frequency settings for the country of use is an infringement of
national law and may be punished as such.

For country-specific information, see the additional compliance information
supplied with the product.

Wireless interoperability

The Intel(R) PRO/Wireless 3945BG Network Connection are designed to be
interoperable with other wireless LAN products that are based on direct
sequence spread spectrum (DSSS) radio technology and to comply with the
following standards:

z IEEE Std. 802.11b compliant Standard on Wireless LAN.

z IEEE Std. 802.11g compliant Standard on Wireless LAN.

z IEEE Std. 802.11a compliant Standard on Wireless LAN.

z Wireless Fidelity (WiFi) certification, as defined by the Wi-Fi Alliance.

Notebook User Guide

23

The Intel(R) PRO/Wireless 3945ABG Network Connection adapter

or the Intel(R) PRO/Wireless 3945BG Network Connection adapter

The Intel(R) PRO/Wireless 3945ABG Network Connection adapter or the
Intel(R) PRO/Wireless 3945BG Network Connection adapter, like other radio
devices, emits radio frequency electromagnetic energy. The level of energy
emitted by this device, however, is less than the electromagnetic energy
emitted by other wireless devices such as mobile phones. The Intel(R)
PRO/Wireless 3945ABG Network Connection adapter or the Intel(R)
PRO/Wireless 3945BG Network Connection adapter wireless device operates
within the guidelines found in radio frequency safety standards and
recommendations. These standards and recommendations reflect the
consensus of the scientific community and result from deliberations of panels
and committees of scientists who continually review and interpret the
extensive research literature. In some situations or environments, the use of
the Intel (R) PRO/Wireless 3945ABG Network Connection adapter or the
Intel(R) PRO/Wireless 3945BG Network Connection adapter may be
restricted to:

z Using the Intel(R) PRO/Wireless 3945ABG Network Connection adapter

or the Intel(R) PRO/Wireless 3945BG Network Connection adapter

equipment on board airplanes, or

z Using the Intel(R) PRO/Wireless 3945ABG Network Connection adapter

or the Intel(R) PRO/Wireless 3945BG Network Connection adapter

equipment in any other environment where the risk of interference with

other devices or services is perceived or identified as being harmful.

If you are uncertain of the policy that applies to the use of wireless devices in a
specific organization or environment (an airport, for example), you are
encouraged to ask for authorization to use the Intel(R) PRO/Wireless
3945ABG Network Connection adapter or the Intel(R) PRO/Wireless
3945BG Network Connection wireless devices before you turn it on.

Regulatory information

Information for the OEMs and Integrators:

The following statement must be included with all versions of this document

Notebook User Guide

24

supplied to an OEM or integrator, but should not be distributed to the end
user.

z This device is intended for OEM integrators only.

z This device cannot be co-located with any other transmitter.

z Please see to the full Grant of Equipment document for other restrictions.

z This device must be operated and used with a locally approved access

point.

Information to be Supplied to the End User by the OEM or
Integrator

The following regulatory and safety notices must be published in
documentation supplied to the end user of the product or system
incorporating an Intel(R) PRO/Wireless 3945ABG Network Connection or an
Intel(R) PRO/Wireless 3945BG Network Connection in compliance with local
regulations. Host system must be labeled with "Contains FCC ID:
XXXXXXXX", FCC ID displayed on label.

The Intel(R) PRO/Wireless 3945ABG Network Connection adapter or the
Intel(R) PRO/Wireless 3945BG Network Connection wireless network device
must be installed and used in strict accordance with the manufacturer's
instructions as described in the user documentation that comes with the
product. For country-specific approvals, see Radio approvals. Intel
Corporation is not responsible for any radio or television interference caused
by unauthorized modification of the devices included with the Intel(R)
PRO/Wireless 3945ABG Network Connection or the Intel(R) PRO/Wireless
3945BG Network Connection adapter kit, or the substitution or attachment of
connecting cables and equipment other than that specified by Intel
Corporation. The correction of interference caused by such unauthorized
modification, substitution or attachment is the responsibility of the user. Intel
Corporation and its authorized resellers or distributors are not liable for any
damage or violation of government regulations that may arise from the user
failing to comply with these guidelines.

Notebook User Guide

25

Local Restriction of 802.11a, 802.11b, and 802.11g Radio Usage

The following statement on local restrictions must be published as part of the
compliance documentation for all 802.11a, 802.11b, and 802.11g products.

Caution: Due to the fact that the frequencies used by 802.11a, 802.11b,
and 802.11g wireless LAN devices may not yet be harmonized in all countries,

802.11a, 802.11b, and 802.11g products are designed for use only in specific
countries, and are not allowed to be operated in countries other than those of
designated use. As a user of these products, you are responsible for ensuring
that the products are used only in the countries for which they were intended
and for verifying that they are configured with the correct selection of
frequency and channel for the country of use. Any deviation from permissible
settings and restrictions in the country of use could be an infringement of
national law and may be punished as such.

FCC Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 5.15 to 5.25
GHz frequency range. FCC requires this product to be used indoors for the
frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems. High power radars are
allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz
bands. These radar stations can cause interference with and /or damage this
device.

z This device is intended for OEM integrators only.

z This device cannot be co-located with any other transmitter.

USA—Federal Communications Commission (FCC)

This device complies with Part 15 of the FCC Rules. Operation of the device
is subject to the following two conditions:

z This device may not cause harmful interference.

z This device must accept any interference that may cause undesired

operation.

Notebook User Guide

26

Note: The radiated output power of the Intel(R) PRO/Wireless 3945ABG
Network Connection adapter or the Intel(R) PRO/Wireless 3945BG Network
Connection wireless network device is far below the FCC radio frequency
exposure limits. Nevertheless, the Intel(R) PRO/Wireless LAN wireless
network device should be used in such a manner that the potential for human
contact during normal operation is minimized. To avoid the possibility of
exceeding the FCC radio frequency exposure limits, you should keep a distance
of at least 20 cm between you (or any other person in the vicinity) and the
antenna that is built into the computer.

Interference statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy. If the equipment is not installed and used in accordance with
the instructions, the equipment may cause harmful interference to radio
communications. There is no guarantee, however, that such interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception (which can be determined by
turning the equipment off and on), the user is encouraged to try to correct the
interference by taking one or more of the following measures:

z Reorient or relocate the receiving antenna.

z Increase the distance between the equipment and the receiver.

z Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

z Consult the dealer or an experienced radio/TV technician for help.

Note: The Intel(R) PRO/Wireless 3945ABG Network Connection adapter
or the Intel(R) PRO/Wireless 3945BG Network Connection adapter wireless
network device must be installed and used in strict accordance with the
manufacturer's instructions as described in the user documentation that comes
with the product. Any other installation or use will violate FCC Part 15
regulations.

Notebook User Guide

27

Underwriters Laboratories Inc. (UL) Regulatory Warning

For use in (or with) UL Listed personal computers or compatible.

Brazil

Este equipamento opera em caráter secundário, isto é, não tem direito a

proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e

não pode causar interferência a sistemas operando em caráter primário

Canada—Industry Canada (IC)

This device complies with RSS210 of Industry Canada.

Caution: When using IEEE 802.11a wireless LAN, this product is
restricted to indoor use due to its operation in the 5.15- to 5.25-GHz
frequency range. Industry Canada requires this product to be used indoors for
the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for
harmful interference to co-channel mobile satellite systems. High power radar
is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85GHz
bands. These radar stations can cause interference with and/or damage to this
device.

The maximum allowed antenna gain for use with this device is 6dBi in order
to comply with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85GHz
frequency range in point-to-point operation

This Class B digital apparatus complies with Canadian ICES-003, Issue 4, and
RSS-210, No 4 (Dec 2000) and No 5 (Nov 2001).

Cet appariel numérique de la classe B est conforme à la norme NMB-003, No.
4, et CNR-210, No 4 (Dec 2000) et No 5 (Nov 2001).

"To prevent radio interference to the licensed service, this device is intended
to be operated indoors and away from windows to provide maximum
shielding. Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing."

Notebook User Guide

28

« Pour empêcher que cet appareil cause du brouillage au service faisant l'objet
d'une licence, il doit être utilisé a l'intérieur et devrait être placé loin des
fenêtres afinde fournir un écran de blindage maximal. Si le matériel (ou son
antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence. »

Europe Frequency Bands

2.400 - 2.4835 GHz (Europe ETSI)

5.15 – 5.35 GHz and 5.47 - 5.725 GHz (Europe ETSI)
Low band 5.25 – 5.35 GHz is for indoor use only

5.47 - 5.725 GHz is current not allowed in Czech Republic and France

Notebook User Guide

29

Declaration of Conformity

Notebook User Guide

30

This equipment complies with the essential requirements of the European
Union directive 1999/5/EC.

Notebook User Guide

31

France

Pour la France métropolitaine

2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage intérieur

2.400 - 2.454 GHz (Canaux 1à 7) autorisé en usage extérieur

Pour la Guyane et la Réunion

2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage intérieur

2.420 - 2.4835 GHz (Canaux 5 à 13) autorisé en usage extérieur

Italy

A general authorization is requested for outdoor use in Italy

Notebook User Guide

32

The use of these equipments is regulated by:

1.

D.L.gs 1.8.2003, n. 259, article 104 (activity subject to general authorization)
for outdoor use and article 105 (free use) for indoor use, in both cases for
private use.

2.

D.M. 28.5.03, for supply to public of RLAN access to networks and telecom
services.

L’uso degli apparati è regolamentato da:

1. D.L.gs 1.8.2003, n. 259, articoli 104 (attività soggette ad autorizzazione

generale) se utilizzati al di fuori del proprio fondo e 105 (libero uso) se
utilizzati entro il proprio fondo, in entrambi i casi per uso private.

2. D.M. 28.5.03, per la fornitura al pubblico dell’accesso R-LAN alle reti e ai

servizi di telecomunicazioni.

Latvia

A license is required for outdoor use for operation in 2.4 GHz band.

Japan

Indoor use only.

Korea

Taiwan

Notebook User Guide

33

Radio approvals

To determine whether you are allowed to use your wireless network device in a
specific country, please check to see if the radio type number that is printed on
the identification label of your device is listed in the manufacture OEM
Regulatory Guidance document.

Television antenna connectors protection (for system TV
tuner card)

External television antenna grounding

If an outside antenna or cable system is to be connected to your mini EPC,

make sure that the antenna or cable system is electrically grounded to provide

some protection against voltage surges and static charges.

ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section

820.93, provide information with regard to proper grounding of the mask and

supporting structure, grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna discharge unit, connection to

grounding electrodes, and requirements for the grounding electrode.

Lightning protection

For added protection of any product

during a lightning storm or when it is

left unattended or unused for long

periods of time, unplug the product

from the wall outlet and disconnect

the antenna or cable system.

Power Lines

Notebook User Guide

34

Do not locate the antenna near overhead light or power circuits, or where it

could fall into such power or circuits.

WARNING: When installing or realigning an outside antenna system,
extreme care should be taken to keep from touch such power lines or
circuits. Contact with them could be fatal.

Regulatory information:

Installation and use of this Wireless LAN device must be in strict accordance

with the instructions included in the user documentation provided with the

product. Any changes or modifications (including the antennas) made to this

device that are not expressly approved by the manufacturer may void the user’s

authority to operate the equipment. The manufacturer is not responsible for

any radio or television interference caused by unauthorized modification of

this device, or the substitution of the connecting cables and equipment other

than manufacturer specified. It is the responsibility of the user to correct any

interference caused by such unauthorized modification, substitution or

attachment. Manufacturer and its authorized resellers or distributors will

assume no liability for any damage or violation of government regulations

arising from failing to comply with these guidelines.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for

an uncontrolled environment. This device and its antenna must not be co-

located or operating in conjunction with any other antenna or transmitter.

Safety Information

In order to maintain compliance with the FCC RF exposure guidelines, this

equipment should be installed and operated with minimum distance 20cm

Notebook User Guide

35

between the radiator and your body. Use only with supplied antenna.

Unauthorized antenna, modification, or attachments could damage the

transmitter and may violate FCC regulations.

This equipment complies with FCC RF radiation exposure limits set forth an

uncontrolled environment. This device was tested for typical lap-held

operations with the device contacted directly to the human body to the back

side of the notebook computer. To maintain compliance with the FCC RF

exposure requirement, avoid direct contact to the transmitting antenna during

operation.

Notebook User Guide

36

About Your Notebook Computer

Congratulation for having purchased your new Professional

Multimedia Notebook. This notebook incorporates the

strongest features, which integrate the latest technologies

available in the notebook industry.

Your new notebook computer not only drives today　

multimedia applications but also be ready for tomorrow　

exciting new software.

This Professional Multimedia Notebook is a freedom,

flexibility, and functionality notebook which users are

demanding for a long time.

Notebook User Guide

37

About Your User Guide

Welcome to your Professional Multimedia Notebook User

Guide. This manual covers everything you need to know in

learning how to use your computer. This manual also assumes

that you know the basic concepts of Windows and the PC. You

will start doing a lot of great and fun things with your computer.

This manual is divided into eight chapters.

Chapter 1 gives introduction on your computer features.

Chapter 2 provides step-by-step instructions to help you

begin using your notebook as quickly as possible.

Chapter 3 describes how to operate the standard features of

your computer.

Chapter 4 illustrates how to integrate video and sound chips

into impressive presentation.

Chapter 5 illustrates how to connect external device to your

computer.

Chapter 6 explains how to use the System BIOS Setup

program.

Chapter 7 explains how to use the internal module options of

your computer.

Chapter 8 offers instructions on how to care and maintain

your notebook.

Notebook User Guide

38

Table of Contents

ABOUT YOUR NOTEBOOK COMPUTER........................................ 36

ABOUT YOUR USER GUIDE............................................................... 37

1 INTRODUCTION............................................................................. 45

1.1 FEATURE HIGHLIGHT .................................................................... 46

1.2 UNPACKING THE COMPUTER ......................................................... 48

1.3 THE INSIDE OF THE NOTEBOOK ..................................................... 48

Notebook LED Indicator.............................................................. 51

1.4 T

HE FRONT SIDE OF THE NOTEBOOK............................................. 52

Notebook Status Icons.................................................................. 54

1.5 T

HE LEFT SIDE OF THE NOTEBOOK................................................ 55

1.6 THE RIGHT SIDE OF THE NOTEBOOK ............................................. 57

1.7 THE UNDERSIDE OF THE NOTEBOOK ............................................. 58

1.8 NOTEBOOK ACCESSORIES.............................................................. 60

1.9 NOTEBOOK OPTIONS ..................................................................... 61

2 GETTING STARTED...................................................................... 63

2.1 USING THE BATTERY PACK ........................................................... 64

Extending Battery Life.................................................................. 67

2.2 CONNECTING THE AC POWER SOURCE.......................................... 67

2.3 STARTING YOUR COMPUTER......................................................... 69

2.4 ADJUSTING THE DISPLAY CONTROLS ............................................ 70

2.5 INSTALLING THE NOTEBOOK DEVICE DRIVERS ............................. 70

Installing Windows Vista from Optical Disk Drive......................... 70

driver installation note:................................................................ 71

Installing the Chipset Driver........................................................ 71

Installing the VGA Device Driver................................................ 72

Installing the Audio Device Driver .............................................. 72

Notebook User Guide

39

Installing Synaptics – Touch Pad driver......................................73

Installing the LAN Device Driver.................................................73

Installing the Bluetooth Device Driver.........................................74

Installing Camera Device Driver.................................................74

Installing CardReader Device Driver..........................................75

Installing the Wireless LAN Driver and Utility............................75

Installing the Robson Driver and Utility...................................... 76

Installing the TV-Tuner Card Device Driver ............................... 77

2.6 T

URNING OFF YOUR COMPUTER.................................................... 77

3 USING YOUR NOTEBOOK...........................................................79

3.1 STARTING YOUR OPERATING SYSTEM........................................... 80

3.2 UNDERSTANDING THE KEYBOARD FUNCTIONS.............................. 80

Basic Keyboard Functions ........................................................... 83

Cursor Control Keys..................................................................... 84

Screen Control Keys..................................................................... 84

Windows Hot Keys........................................................................ 85

Special Function Keys..................................................................85

3.3 USING THE TOUCHPAD POINTING DEVIC E .......................................87

3.4 CONFIGURING YOUR SCREEN DISPLAY ......................................... 89

Possible Display Configurations.................................................. 90

Changing the Display Properties under Windows.................................. 91

3.5 KNOWING THE POWER SAVING FEATURES .................................... 91

3.6 WORKING WITH THE BUILT-IN HDD............................................... 93

3.7 HOW TO ACCESS THE OPTICAL DRIVE........................................... 93

3.8 EXPRESSCARD...............................................................................95

What is ExpressCard ?.................................................................95

Inserting and Removing a ExpressCard.......................................97

3.9 USING FLASH MEMORY CARDS................................................... 100

What is Flash Memory Card? .................................................... 100

4 FUN WITH WINDOWS VISTA EXPERIENCE ........................103

Notebook User Guide

40

4.1 WHAT IS WINDOWS VISTA? ........................................................ 104

4.2 GET READY FOR WINDOWS VISTA ..............................................104

4.3 ENJOY YOUR MULTIMEDIA APPLICATION ...................................107

Internet Explorer........................................................................ 107

Windows Calendar..................................................................... 107

Windows Contacts......................................................................108

Windows Defender ..................................................................... 109

Windows DVD Maker................................................................. 110

Windows Fax and Scan .............................................................. 111

Windows Live Messenger Download ......................................... 112

Windows Mail............................................................................. 113

Windows Media Center.............................................................. 114

Windows Media Player .............................................................. 115

Windows Meeting Space............................................................. 115

Windows Movie Maker............................................................... 116

Windows Photo Gallery.............................................................. 117

Windows Update......................................................................... 118

Windows Sidebar and Gadgets................................................... 119

Gaming....................................................................................... 120

Windows Flip and Windows Flip 3D ......................................... 121

5 CONNECTING TO PERIPHERALS........................................... 123

5.1 USING THE USB PORT................................................................. 124

5.2 USING THE IEEE 1394 PORT ....................................................... 125

5.3 USING THE EXTERNAL MONITOR PORT............................................... 126

5.4 USING THE ANTENNA PORT.............................................................. 128

5.5 USING THE EXTERNAL AUDIO SYSTEM ....................................... 129

5.6 USING THE LAN PORT ................................................................ 130

5.7 USING THE WIRELESS LAN......................................................... 131

6 CU S T O M I Z I N G Y O U R N O T E B O O K............................................ 133

Notebook User Guide

41

6.1 RUNNING THE BIOS SETUP PROGRAM ........................................ 134

6.2 USING THE MAIN MENU SETUP ...................................................136

6.2.1 Prim a r y M a s t e r S u b -M e n u.............................................. 138

6.2.2 Secondary Master Sub-Menu...........................................139

6.3 USING THE ADVANCED CMOS SETUP.........................................140

6.4 USING SECURITY MENU SETUP ................................................... 141

6.5 USING THE BOOT SETUP.............................................................. 143

6.6 HOW TO EXIT THE SETUP PROGRAM............................................ 144

6.7 HOW TO UPGRADE THE BIOS......................................................145

7 USING OPTIONS...........................................................................147

SYSTEM UPGRADE................................................................................. 148

7.1 MEMORY UPGRADE..................................................................... 148

Installing Memory Module.........................................................149

7.2 H

ARD DISK UPGRADE.................................................................. 150

7.3 W

IRELESS MODULE INSTALLATION............................................. 151

8 CARING FOR YOUR NOTEBOOK............................................153

8.1 IMPORTANT SAFETY INSTRUCTIONS ............................................ 154

8.2 CLEANING YOUR COMPUTER....................................................... 156

8.3 MAINTAINING THE LCD QUALITY............................................... 157

8.4 MAINTAINING YOUR HARD DISK ................................................ 157

8.5 BATTERY CARE GUIDELINES....................................................... 158

8.6 WHEN YOU TRAVEL.................................................................... 159

APPENDIX A SYSTEM SPECIFICATION......................................161

Processor Unit............................................................................162

System Memory........................................................................... 162

LCD Display............................................................................... 162

VGA System ................................................................................162

Storage........................................................................................ 163

Notebook User Guide

42

Audio System .............................................................................. 163

ExpressCard...............................................................................163

Touchpad.................................................................................... 163

Keyboard.................................................................................... 164

Flash BIOS................................................................................. 164

I/O Ports..................................................................................... 164

Wireless devices ......................................................................... 164

AC/DC Power Supply Adapter................................................... 164

Battery........................................................................................ 164

Weight and Dimension ............................................................... 165

Notebook User Guide

43

This page is intended to be blank.

Introduction1

45

1 Introduction

Your Notebook PC is a fully Windows compatible

portable personal computer. With the latest features

in mobile computing and multimedia technology, this

notebook makes a natural traveling companion. With

leap of technology and compact, your Notebook PC

runs on a whole wide range of general business,

personal productivity, entertainment, and professional

applications. It is ideal for use in the office, at home,

and on the road.

Your Notebook PC makes an ideal choice for use in

the office, the schoolroom, at home, on the road and

all other occasions.

Notebook User Guide

46

1.1 Feature Highlight

Before we go to identify each part of your Notebook PC, we will first

introduce you to other notable features of your computer.

Processing Unit

• Your notebook runs on Intel® Core

TM

2 Duo processor that is integrated

with 2MB or 4MB L2 Cache. Check with your dealer on the CPU type and

speed.

• Fully compatible with an entire library of PC software based on operating

systems such as Windows Vista.

Memory

This notebook provides two memory slots for installing DDRII SDRAM 200-

pin SODIMM modules up to 4GB using 512MB, 1024MB or 2048MB DDRII

SDRAM modules.

Wide Screen LCD Display

Provides extraordinary 13.3" WXGA 1280 x 800 wide screen LCD display. It is

the best choice for you to watch DVD movie.

Wireless LAN

Intel® Wireless WiFi Link 4965AGN Network Connection (802.11a/b/g/n),

Mini Card.

Graphic System

Provides blazing graphics controller embedded in Intel GM965 chipset.

Introduction1

47

Optical Disk Drive

Provides DVD Dual or DVD Super-Multi optical disk drive..

IEEE 1394

Provides one IEEE 1394 port for fast data transmission by external hard disk

or digital video (DV).

USB 2.0

Provides three USB2.0 ports for fastest I/O data transmission.

Audio System

Compliant with Intel HD Audio (Azalia). Sound Blaster compatible. Support

32-bit, multi-channel audio system output.

Flash BIOS

Flash BIOS allows you to easily upgrade the System BIOS using the Phoenix

Flash utility program.

Power and System Management

• Integrated SMM (System Management Mode) on system chipset that shuts

down components not in use to reduce power consumption. To execute

power management, you can set up the parameter in Power Options

properties by pointing your mouse to Control Panel of Windows.

• Closing the Notebook computer (lowering the cover) allows you to

suspend the system operation instantly and resume at the press of the

power button.

• System Password for User and Supervisor included on the BIOS SETUP

Program to protect unauthorized use of your computer.

Notebook User Guide

48

1.2 Unpacking the Computer

Your computer comes securely packaged in a sturdy cardboard shipping

carton. Upon receiving your computer, open the carton and carefully remove

the contents. In addition to this User Guide, the shipping carton should also

contain the following items:

; The Notebook Computer
; An AC Adapter and AC Power Cord
; Li-Ion Battery Pack
; CD Driver Utility/ User Guide
; Quick Setup Manual

Carefully inspect each component to make sure that nothing is missing and/or

damaged. If any of these items is missing or damaged, notify your dealer

immediately. Be sure to save the shipping materials and the carton in case you

need to ship the computer or if you plan to store the computer away sometime

in the future.

1.3 The Inside of the Notebook

The notebook computer is compact with features on every side. First, look

at the inside of the system. The following sections describe inside features.

Introduction1

49

1. 5. Integrated Microphone 2. Webcam.

3. Color Widescreen LCD Display 4. Power On/Resume Button

6. Webcam Switch 7. LED Indicators

8. Keyboard 9. Touchpad Pointing Device

• Integrated Microphone

Integrated mono microphone for instant voice recording and

simultaneous voice conversation.

• Webcam

The Webcam is 1300K pixels. It can be used as a communication device

that transmits instant image through network for conference.

• Color Widescreen LCD Display

The notebook computer comes with a color LCD that you can adjust for a

comfortable viewing position. The LCD is 13.3” TFT color LCD with

Notebook User Guide

50

1280x800 (Wide XGA) resolution panels. The features of the Color LCD

Display are summarized as follows:

 TFT color LCD with Widescreen 13.3” 1280x800 (Wide XGA)

resolution panels.

 Capable of displaying 16M colors (32-bit true color).

 LCD display control hot-keys allows you to adjust the brightness of

the LCD.

 Simultaneous display capability for LCD and external desktop

computer monitor.

• Power On/Resume Button

Switches the computer power on and off, or resumes whenever it is in

Suspend mode.

• Webcam Switch

To disable or enable the Webcam function. For closing this function, push

the switch to the left side; for turning on this function, push the switch to

the right side.

• LED Indicators

Keeps you informed of your notebook computer’s current status of

Bluetooth/Wireless LAN accessing, Numeric Lock and Caps Lock.

Description of the status appears in the latter part of this section.

• Keyboard

 Standard QWERTY-key layout and full-sized 87 keys keyboard with

Windows system hot-keys, embedded numeric keypad, 11 hot keys,

inverted "T" cursor arrow keys, and separate page screen control

keys.

 Wide extra space below the keyboard panel for your wrist or palm to

sit-on comfortably during typing.

Introduction1

51

• Touchpad Pointing Device

Microsoft mouse compatible with two touchpad click buttons. The two

select buttons located at each side support tapping selection and dragging

functions. These buttons work like a standard computer mouse. Simply

move your fingertip over the touchpad to control the position of the

cursor. Use the selection buttons below the touchpad to select menu

items.

NOTEBOOK LED INDICATOR

The Status LED keeps you informed of your notebook computer’s current
status of Bluetooth/Wireless LAN accessing, Numeric Lock and Caps Lock.

1. Wireless LAN/Bluetooth 2. Num Lock 3. Caps Lock

• Wireless LAN/Bluetooth

When LED in blue light indicates that the Wireless LAN/Bluetooth

Function is activated. When activate, the system will search the wireless

LAN signal automatically if you had installed the driver.

• Num Lock

Notebook User Guide

52

When LED in blue light indicates that the Num Lock key on the keyboard

is activated. When activated, the embedded numeric keypad will be

enabled.

• Caps Lock

When LED in blue light indicates that the Caps Lock key on the keyboard

is activated. When activated, all alphabet keys typed in will be in uppercase

or capital letters.

1.4 The Front Side of the Notebook

1. 11. Built-in Stereo Speakers 2. LED Indicators

3. Microphone Jack 4. Headphone Jack

5. IEEE1394 6. 4 in 1 card slot

7. Volume-Down Button 8. Volume-Up Button

9. Mute/Resume Button 10. Play/Pause Button

• Built-in Stereo Speakers

Integrated left and right mini stereo speakers for sound and audio output

for your multimedia presentations or listening pleasure.

Introduction1

53

• LED Indicators

Keeps you informed of your notebook computer’s current operating

status. Description of the status icons appears in the latter part of this

section.

• Microphone Jack

Allows you to connect an external microphone for monophonic sound

recording directly into your notebook computer.

• Headphone Jack (with SPDIF out)

Lets you plug in a stereo headphone, powered speakers, or earphone set

with 1/8 inch phono plug for personal listening. (The SPDIF transmits

digitized audio signal by optical fiber. The external audio amplifier can get

the best audio quality without loss.)

• Line-In Jack

Lets you connect audio sources, such as external CD, players to this jack

for recording on your computer or playback through the Line-Out device.

• IEEE 1394

IEEE 1394 port is a high speed I/O port that can transfer high levels of

data in real-time, such as external hard disk, Digital Video Camera.

• 4 in 1 card slot

The card slot supports SD, MMC, MS (Memory Stick) and MS_Pro flash

memory card format. You can use either of the 4 types flash memory

cards for extra storage media. Please pay attention to correct direction

when you insert the flash memory card. For more detail of flash card, you

can refer to Chapter 3.9

• Easy buttons for music listening

There are four easy buttons for your listening pleasure.

 Volume-Down Button

Decreases the audio volume of the music incrementally.

Notebook User Guide

54



Volume-Up Button

Increases the audio volume of the music incrementally.

 Mute/Resume Button

Press this button to shut down or resume the music.

 Play/Pause Button

Press this button to play or pause the music.

NOTEBOOK STATUS ICONS

The Status LED Panel keeps you informed of the notebook’s current power
and operating status. Each LED is marked with an icon to designate the
system status.

1. Power Indicator 2. Drive Access

3. Battery Charging LED 4. TV Access

• Power Indicator

Lets you know that power to the system is turned on. This LED is

positioned so that you can see the power state whether the LCD panel is

opened or closed.

 Lights blue when the system is powered on.

Introduction1

55



Lights blue blinking when the system is in Standby mode.

 Lights yellow when the battery power is low.

 Lights orange when the battery power is critical low.

• Battery Charging LED

Lights to indicate battery in charging status.

 Lights orange to indicate that the battery is in charging.

 Lights orange blinking when the battery charging is in error.

 Lights blue to indicate the battery is fully charged or no battery

installed.

• Drive Access

When LED in blue blinking light indicates that the system is accessing the

Hard Disk or Optical Disk Drive.

• TV Access

When LED in blue light indicates that the system is accessing the TV

channel.

1.5 The Left Side of the Notebook

The left side of your notebook computer provides the features shown in the

following figure.

Notebook User Guide

56

1. Locking Device Keyhole 2. LAN Port

3. Air-Outlet Vent 4. USB 2.0 Ports

5. ExpressCard Slot

• Locking Device Keyhole

Lets you attach a Kensington security system or a compatible lock to

physically secure your notebook computer.

• LAN Port

An internal 10Base-T/100Base-TX Ethernet LAN module connects your

computer to other computers/networks through a local area network

(LAN).

• Air-Outlet Vent

Emits the heat out of your computer and keeps it within operating

temperature.

• USB 2.0 Ports

The Universal Serial Bus (USB) port allows you to connect USB 2.0-

compliant devices (for example, printers, scanners and so on) to your

notebook computer.

• ExpressCard Slot

Introduction1

57

A newly developed PC Card interface, its connector has 26 pins and has a

potential transfer rate of up to 500 MB/sec (or 250 MB/sec in each

direction).

1.6 The Right Side of the Notebook

The right side of the notebook computer offers the features shown in the

following figure.

1. Eject Button 2. Optical Disk Drive

3. Antenna Port 4. USB 2.0 Port

5. VGA Port 6. DC Power Port

Right Side Features

• Eject Button

Push the eject button found on the left side of the Optical Disk Drive slot

to release the Optical Disk.

• Optical Disk Drive

Allows you to load and start programs from a compact disc (CD) or a

digital video disc (DVD) and play conventional audio CDs. It also can

make CD/DVD by using CD-R/RW or DVD-R/RW.

Notebook User Guide

58

• Antenna Port

Allows you to connect the antenna for accessing the TV channel for TV

watching..

• USB 2.0 Port

The Universal Serial Bus (USB) port allows you to connect USB 2.0-

compliant devices (for example, printers, scanners and so on) to your

notebook computer

• VGA Port

Lets you attach an external monitor or projector for wider display. You

can run the LCD display and the external monitor simultaneously or

switch it to monitor only using the display hot-key.

• DC Power Port

Lets you connect the AC power adapter in supplying continuous power to

your notebook and recharging the battery.

1.7 The Underside of the Notebook

The bottom of the notebook computer offers the following features.

Introduction1

59

1. Hard Disk Compartment 2. Memory Compartment

3. Battery Lock Latch 4. Air-Outlet Vent

5. Battery Release Latch 6. Battery Bay

Bottom of the System

• Hard Disk Compartment

Open this cover of this compartment to replace with other Hard Disk

Drive. Please refer to Chapter 7 for how to replace it.

• Memory Compartment

There are two SO-DIMM memory slots. One memory slot is empty for

upgrade usage.

• Battery Lock Latch

Push the latch to the lock side to lock and secure the battery, or push the

latch to the unlock side for unpacking the battery pack.

• Air-Outlet Vent

Emits the heat out of your computer and keeps it within operating

temperature.

• Battery Release Latch

To release the battery, first locate the Battery Lock Latch at the left side

with unlock status, then push the Battery Release Latch to the right end to

remove the battery pack.

• Battery Bay

Equipped with a choice of Lithium-Ion (Li-Ion) battery pack.

Notebook User Guide

60

1.8 Notebook Accessories

AC Adapter

The AC Adapter supplies external power to your notebook computer and

charges the internal battery pack simultaneously. The AC adapter has an auto-

switching design that can connect to any 100VAC ~ 240VAC power outlets.

You just change the power cord if you are going to use your notebook in other

countries with different connector outlets.

When you connect the AC adapter, it charges the battery whether or not the

notebook computer is powered on.

Battery Pack

Aside from the AC adapter, your computer can also be powered through the

internal battery pack. The battery pack uses rechargeable Lithium-Ion (Li-Ion)

battery cells that provide long computing hours when fully charged and power

management enabled. You should always leave the battery inside your

computer even when using the AC adapter as it also acts as a back-up power

supply in case power from the AC adapter is cut off. It is also very important

to have the battery pack always charged to prevent battery cell degradation.

Introduction1

61

1.9 Notebook Options

DVD dual (Dual Rewritable DVD combo) Device Pack

This device pack combines following two standard packs. Using the suitable

media, you can make any format of CD or DVD as you want.

DVD-RW combo:

This device pack can write data to CD-R or CD-RW and DVD-R or DVD-

RW media and also can read DVD/CD title. This media is commonly used on

DVD video player.

DVD+RW combo:

This device pack can write data to CD-R or CD-RW and DVD+R or

DVD+RW media for you to backup the data and also can read DVD/CD

title. This media is commonly used on newer DVD video player.

Getting Started 2

63

2 Getting Started

Your Notebook is designed and pre-configured for

easy setup and use. This chapter describes the

installation steps you should follow to get the

notebook up and running as quickly as possible.

Contact your dealer if they have pre-installed all the

needed drivers to fully operate your computer or if

there is an update on the driver installation of the

notebook.

Notebook User Guide

64

2.1 Using the Battery Pack

The notebook is designed to operate with one of the following power sources:

• With AC power using the AC adapter connected to an electrical outlet.

• With a Lithium-Ion (Li-Ion) battery pack.

You should use the AC adapter whenever it is possible, relying on the battery

pack only when AC power is unavailable.

Before you use your notebook computer, install and recharge the battery pack

first. The rechargeable Li-Ion battery pack allows you to operate the notebook

without an external power source. When you connect the AC power adapter,

the battery immediately starts to recharge. Normal battery charging time is 2

hours for Lithium-Ion (Li-Ion) battery pack when your computer is turned off.

For maximum battery performance, fully discharge the battery first before

recharging it when you start to use it first time. To do so, unplug the AC

adapter, turn off power management features (through Setup and Windows),

and turn on the system. Once the battery is fully discharged, plug in the AC

adapter and recharge the battery.

If you do not discharge the battery completely, it fails to accept a full recharge.



Li-Ion battery is vulnerable, do not charge it with other power adapter, or it

may cause fire or explosion.



Risk of explosion if battery is replaced by an incorrect type. Dispose of used

batteries according to the instructions.

Getting Started 2

65

Installing the Battery Pack

This notebook provides the most convenient way to install the battery pack

into your computer. With the extended nose directed toward the

compartment, insert and push the battery pack.

Removing the Battery Pack

To remove the battery pack, slide the lock latch to the end of left side to

unlock the battery lock latch (1), and slide the battery release latch to the end

of right side to release the battery latch (2), then take out the battery pack with

your finger (3).

Notebook User Guide

66

Replacing the Battery Pack

When your notebook estimates that the battery only has enough charge to

continue for a few minutes, it will alert you with a battery low warning beep. If

you are consuming a lot of power by using the audio system, the PCMCIA

slots, the hard disk drives, and optical disk drive, your notebook might run out

of charge much sooner than you expect. You should always respond to the

battery low indication by connecting to AC power or turning off your

notebook, or suspending your notebook to disk. If you do not do so, the

notebook will automatically suspend to disk and turn off. The contents of the

memory will store in the hard disk drive. You will be unable to restart the

notebook until you have connected to the AC adapter or installed a charged

battery. To replace the battery pack, refer to the previous sections on

"Installing the Battery Pack" and "Removing the Battery Pack."



Be sure to save your data before replacing the battery pack or connecting

the AC adapter. Failure to do so can result in data loss.

Getting Started 2

67

EXTENDING BATTERY LIFE

It is important to be aware of the simple things for extending the life of the

system main battery while you are on the road. You should find a working

place where the external lighting is not too bright and turn down the screen

brightness. Also, you can choose the available mode on the Power

Management item of the Control Panel in Windows.

2.2 Connecting the AC Power Source

The AC adapter provides external power source to your computer and charges

the internal battery pack at the same time. The AC adapter also has an auto-

switching design that can connect to any 100VAC ~ 240VAC power outlets.

To connect the power adapter:

1. Plug the AC power cord into the power socket of the AC power adapter.

2. Plug the other end of the AC power cord to a live AC wall outlet.

Notebook User Guide

68

3. Plug the connector of the AC adapter to the DC-IN port found at the rear

side of the computer.



Whenever possible, it is advisable to always have the AC adapter connected

to the notebook and the battery pack installed. This ensures continuous

power supply and prevents any data loss incurring from sudden power

breakdown.



y For the power supply of this equipment, an approved power cord has to

be used.
y Make sure the socket and any extension cord(s) you use can support

the total current load of all the connected devices.
y Before cleaning the computer, make sure it is disconnected from any

external power supplies (i.e. AC adapter).

Getting Started 2

69

2.3 Starting Your Computer

The Power/Resume button is found on the top of the base unit. Press the

Power/Resume button to start your computer and check that if the Power

LED turns on.

After a few seconds, the computer’s display will turn on and your computer

will begin to execute the Power On Self Test or POST to check if all system

components are running properly. Any error found during the test will be

displayed on the screen and may generate short beep sound as well.

After the test, the screen will also display a message "press <F2> to enter

SETUP". You don’t need to run this program at the moment as your dealer

already made the necessary settings for your computer optimal operation.

Refer to Chapter 6 on running the SETUP program later.

After the test has completed, your computer will start to search and boot up

the operating system from your hard drive. The notebook computer normally

Notebook User Guide

70

comes with a Windows operating system pre-installed in your hard drive.

Consult the Windows manual on how to use the program. If not, contact your

dealer for assistance.

2.4 Adjusting the Display Controls

The LCD brightness adjustment is controlled by <Fn> +<F8> and <Fn> +
<F9> keys respectively. You need to press these hot-key controls after

powering on your notebook to suit your viewing pleasure.

The Brightness hot-key control adjusts the brightness on the LCD. The

brightness hot-key control will not set the LCD completely dark or bright; it

provides sufficient lighting to the LCD to match the external lighting of the

surrounding. The brighter the room, the more you need to increase the

brightness of the LCD.

2.5 Installing the Notebook Device
Drivers

If you already have an operating system installed into your notebook

computer, it is best to install the needed device drivers for using the built-in

devices of your computer. Before installing the drivers, check with your dealer

first if they have already installed all the drivers along with the operating

system. If not, follow the procedures below:

INSTALLING WINDOWS VISTA FROM OPTICAL DISK DRIVE

To install Windows Vista directly from your optical disk drive, please go to

Boot menu of BIOS setup menu. Use arrow key to select "CD-ROM Drive",

then use "+" or "-" to move it to the top. Go to Exit menu and select "Exit

Getting Started 2

71

Saving Changes". Accordingly, insert the Windows Vista installation CD into

optical disk drive with following the instructions on the screen to finish the

installation.

DRIVER INSTALLATION NOTE:



Please be notified that you should install the CHIPSET Driver first before

installing other driver utilities.

INSTALLING THE CHIPSET DRIVER

Your notebook computer uses this advanced chipset to enhance the stability

and performance. Following is the procedure for installing the chipset driver:

Installing Chipset device driver for Windows Vista 32

1. Click the Start button, then point to Run. The Run dialog box appears.

2. Click the Browse button and specify the directory as

"E:\Drivers\Vista 32\Chipset\Setup.exe".

3. When screen appears the User Account Control window, click “Allow”

for processing the further step.

4. Click "Next" continuously to install this driver when screen displays this

command.

5. Click “Yes” to accept the License Agreement.

6. Click “Next” to continue the following step.

7. Tick the option "Yes, I want to restart my computer now.", and press

"Finish" to restart your system.

Notebook User Guide

72

INSTALLING THE VGA DEVICE DRIVER

Following is the procedure for installing the Video Accelerator 3D Adapter

VGA driver to your computer:

Installing VGA device driver for Windows Vista 32

1. Click the Start button, then point to Run. The Run dialog box appears.

2. Click the Browse button and specify the directory as.

"E:\Drivers\Vista32\VGA\Setup.exe".

3. When screen appears the User Account Control window, click

“Continue” for processing the further step.

4. Click “Next” to install this driver when screen displays this command.

5. Click “Yes” to accept the License Agreement.

6. Click “Next” to continue the following step.

7. Tick the option "Yes, I want to restart my computer now.", and press

"Finish" to restart your system.

INSTALLING THE AUDIO DEVICE DRIVER

Your notebook computer uses the Conexant Audio controller:

Installing Audio device driver for Windows Vista 32

1. Click the Start button, then point to Run. The Run dialog box appears.

2. Click the Browse button and specify the directory as.

"E:\Drivers\Vista32\Audio\Setup.exe"

where the audio driver is located.

3. When screen appears the User Account Control window, click

“Continue” for processing the further step.

Getting Started 2

73

4. Click "OK" to continue the following steps.

5. Tick the "OK" and then restart your system to finish the installation.

INSTALLING SYNAPTICS – TOUCH PAD DRIVER

Installing Synaptics - Touchpad driver for Windows Vista 32

1. Click the Start button, then point to Run. The Run dialog box appears.

2. Click the Browse button and specify the directory as.

"E:\Drivers\Vista32\Touch Pad\Setup.exe".

3. When screen appears the User Account Control window, click

“Continue” for processing the further step.

4. Click "Next" to continue the following step.

5. Click "Finish" and then press "Restart Now" to restart your system

INSTALLING THE LAN DEVICE DRIVER

Please follow the procedures below for installing the LAN driver.

Installing LAN driver for Windows Vista 32

1. Click the Start button and then click Run. The Run dialog box appears.

2. Click Browse button and specify the directory as

“E:\Drivers\Vista32\LAN\Autorun.exe "

3. Click “Install Drivers and Software” to continue the following steps.

4. When screen appears the User Account Control window, click

“Continue” for processing the further step.

5. Click “Next” to continue the following steps.

6. Choose “I accept the terms in the license agreement” and click

Notebook User Guide

74

“Next”.

7. Click “Next” to continue the following steps.

8. Click “Install” to implement the setup program to install this driver.

9. Click “Finish” and then press “Exit” to complete the installation.

INSTALLING THE BLUETOOTH DEVICE DRIVER

Please follow the procedures below for installing the Bluetooth driver:

Installing Bluetooth driver for Windows Vista 32

1. Click the Start button, then point to Run. The Run dialog box appears.

2. Click the Browse button and specify the directory as

"E:\Drivers\Vista32\Bluetooth\Setup.exe".

3. When screen appears the User Account Control window, click

“Continue” for processing the further step.

4. Click “Next” to continue the following steps.

5. Choose “I accept the terms in the license agreement” and click

“Next”.

6. Click “Install” to implement setup program to install this driver.

7. Click “Finish” and then press “Yes” to restart your system

INSTALLING CAMERA DEVICE DRIVER

Please follow the procedures below for installing the Camera Device Driver:

Installing Camera Device Driver for Windows Vista 32

1. Click the Start button, then point to Run. The Run dialog box appears.

Getting Started 2

75

2. Click the Browse button and specify the directory as.

"E:\Drivers\Vista32\Camera\setup.exe"

3. When screen appears the User Account Control window, click

“Continue” for processing the further step.

4. Click “Next” to continue the following steps.

5. Tip the option “Yes, I want to restart my computer now” to finish the

installation.

INSTALLING CARDREADER DEVICE DRIVER

Please follow the procedures below for installing the CardReader Device

Driver:

Installing CardReader Device Driver for Windows Vista 32

1. Click the Start button, then point to Run. The Run dialog box appears.

2. Click the Browse button and specify the directory as.

"E:\Drivers\Vista32\CardReader\setup.exe"

3. When screen appears the User Account Control window, click

“Continue” for processing the further step.

4. Click “OK” to complete the installation.

INSTALLING THE WIRELESS LAN DRIVER AND UTILITY

Please follow the procedures below for installing the Wireless LAN Adapter

driver:

Installing Wireless LAN driver and Utility for Windows Vista 32

1. Click the Start button, then point to Run. The Run dialog box appears.

Notebook User Guide

76

2. Click Browse button and specify the directory as

“E:\Drivers\Vista32\Wireless LAN\Autorun.exe”

3. When screen appears the User Account Control window, click

“Continue” for processing the further step.

4. Click "Install Software" to execute the setup program.

5. Tick the option “I accept the terms in the license agreement”, and

click Next for further step processing.

6. Tick the option “Typical”, and click “Next” again.

7. Click “OK” to complete the installation.

INSTALLING THE ROBSON DRIVER AND UTILITY

Please follow the procedures below for installing the Robson driver:

Installing Robson driver and Utility for Windows Vista 32

1. Click the Start button and then click Run. The Run dialog box appears.

2. Click Browse button and specify the directory as

“E:\Drivers\Vista32\Robson\setup.exe”

3. When screen appears the User Account Control window, click “Allow”

for processing the further step.

4. Click “Next” continuously to install this driver when screen displays this

command.

5. Click “Yes” to accept the License Agreement.

6. Click “Next” to continue the following step.

7. When screen appears the Windows Security window, click “Install” for

processing the further step.

Getting Started 2

77

8. Click “Next” again.

9. Tick the option "Yes, I want to restart my computer now.", and press

“Finish” to restart your system.

INSTALLING THE TV-TUNER CARD DEVICE DRIVER

Please follow the procedures below for installing the TV-Tuner Card Device

Driver:

Installing TV-Tuner Card Device Driver for Windows Vista 32

1. Click the Start button, then point to Run. The Run dialog box appears.

2. Click the Browse button and specify the directory as.

"E:\Drivers\Vista32\TV

Driver\A306_Vista_Drv_x86_V1.12.0.60_Install"

3. When screen appears the User Account Control window, click “Allow”

to complete the installation.

2.6 Turning off Your Computer

If you are not going to use the computer for a while, it is best to turn off the

power of the computer for longer use. Before turning off the power, you need

to close first all application programs and shutdown the operating system.

After turning off the computer, make it a habit to leave the LCD panel open

for a while whenever used for an extended period of time. This allows the

inside parts of the computer to cool off. Closing the panel will force the heat

up against the LCD screen, which may degrade the LCD when done regularly.

More importantly, never close the LCD panel for a long period of time when

computer is on and power saving features are disabled.

Notebook User Guide

78

Using Your Notebook 3

79

3 Using Your Notebook

This chapter describes how to operate the standard

built-in features of the notebook that you normally would

use in your day-to-day computer work. If you are new to

computers and to your operating system, you also need to

read the manual for the operating system on how to work

with your computer. It is very important to familiarize

yourself well with the operating system. The succeeding

chapters not only guide you to go beyond the basics, but

also try other exciting features.

Notebook User Guide

80

3.1 Starting Your Operating System

The operating system is a must ingredient in using your computer. Without an

operating system, it is like playing chess without the chessboard. It is the

platform for all your software application programs to run on. The most

popular operating system today is Microsoft Windows. You should have

installed one operating system by your dealer unless you are an expert

computer user and would need a more powerful operating system. If you have

an operating system already installed in your computer, then you would be up

and running after you power on your computer and boot up the system. Check

your operating system manual on how to run it.

3.2 Understanding the Keyboard
Functions

Your notebook computer is equipped with an 104 keys keyboard that provides

all the functionality of a full-sized 101 or 102-key keyboard. Aside from the

standard typewriter-layout keyboard of your computer, there are a number of

extra features and function controls on the built-in keyboard including

Windows system hot keys.

Using Your Notebook 3

81

1. Function Keys 2. Control Keys

3. Windows Start Menu Key 4. Control Keys

5. Windows Shortcut Key 6. Cursor Control Keys

Keyboard

Key features and operations are described below:

• Function Keys

Function keys are application-driven, like F1 through F12 can be found on

the keyboard. These keys work together with the Fn key to activate special

functions. Some keys (printed in blue on keypad) are preprogrammed with

dual functions.

• Control keys — Ctrl, Alt, Fn, and Shift are controls used in conjunction

with other keys to change their functions. To use control keys, press and

hold the control key while pressing another key. For example, "Press Ctrl-

C" means to hold down the Ctrl key and type the letter C. Key

combinations work especially to the application you are running.

Notebook User Guide

82

• Windows keys

Use the following two keys to facilitate your work:

 Start Menu key

Displays the Start menu.

 Shortcut/Application key

Provides quick access to shortcut menus. This key acts like a right

mouse button.

• Cursor Control keys

Cursor control keys let you position the cursor on the screen where you

want. In the screen, the cursor is a blinking underline, block, or vertical

bar depending on the application. The cursor indicates where the next text

typed is inserted.

• Typewriter keys

Typewriter keys (also called alphanumeric keys) are used to enter text and

characters. Keys with blue print on them behave differently when

combined with control keys.

Using Your Notebook 3

83

BASIC KEYBOARD FUNCTIONS

Keypad Function Description

<Enter> key. Execute a command. Within many
text editing application programs, the <Enter> key
inserts a hard carriage return, just like what ordinary
typewriter does.
<Esc> key. Press this key to cancel or escape from
a command or function.

<Ins> key. Known as the Insert key. Press this key
to toggle the keyboard data entry from insert to type
over mode.

+

<Fn> + <PrtScr> key. Known as the Print Screen
key. Press this key to map the whole screen to share
memory for your specific usage.

<Del> key. Known as the Delete key. Press this key
to delete the character to the right of the cursor, or
delete marked texts or items.
<Backspace> key. Press this key to delete the
character to the left of the cursor.

<Shift> key. Press this key in combination with
alphabet letters to produce uppercase letters in
typing. Use this key in combination with those two­character keys (found on the second row of the
keyboard) to produce the upper marked keys. Also
used in most application program in combination
with other keys to execute a certain command.
<Tab> key. Press this key to move the cursor to the
next tab stop on the right. This key works much the
same as in ordinary typewriter.
<Ctrl> key. Known as the Control key. Used in
most application program in combination with other
keys to execute a certain command.

Notebook User Guide

84

Keypad Function Description

<Alt> key. Known as the Alternate key. Used in
most application program in combination with other
keys to execute a certain command.

<Num Lock> key. Activates the embedded 15-key
numeric keypad. The keys are color coded blue.

<Caps Lock> key. Used in most application
program to always activate uppercase alphabet
characters.

+

<Fn> + <Scroll Lock> key. Used in most
application program to scroll the screen without
having to move the cursor.

CURSOR CONTROL KEYS

Keypad Function Description

Up arrow key. Moves the cursor up one line at a

time.

Down arrow key. Moves the cursor down one
line at a time.

Left arrow key. Moves the cursor to the left one
space at a time.

Right arrow key. Moves the cursor to the right
one space at a time.

SCREEN CONTROL KEYS

Using Your Notebook 3

85

Keypad Function Description

<Home> key. Moves the cursor to the

beginning of a screen or line.

<PgUp> key. Moves the cursor up one

screen at a time

<PgDn> key. Moves the cursor down one

screen at a time

<End> key. Moves the cursor to the end of a

screen or line.

WINDOWS HOT KEYS

Keypad Function Description

<Start> key. Pulls up the Windows Start menu.

<Right Click> key. Performs a mouse right-click
function for Windows system.

SPECIAL FUNCTION KEYS

The notebook has special system function keys that activate key serving dual

functions. When pressed in conjunction with the <Fn> key, these keys set

specific system parameters and are sometimes referred to as "hot keys".

Notebook User Guide

86

Keypad Function Description

+

Switches the system into Suspend mode.

+

To enable or disable the wireless LAN

function.

+

Switches display between LCD, CRT, or

LCD and CRT simultaneously.

+

To enable or disable the Bluetooth

function.

+

To enable or disable the Webcam

function.

+

To enable or disable the TV tuner.

+

To play or pause the music.

+

To stop the music or DVD/VCD playing.

Using Your Notebook 3

87

Keypad Function Description

+

To revert the previous music or previous

DVD (VCD) section.

+

To play the next music or next DVD

(VCD) section.

+

Increases the brightness of LCD display

incrementally.

+

Decreases the brightness of LCD display

incrementally.

+

Increases the audio volume of the

notebook incrementally.

+

Decreases the audio volume of the

notebook incrementally.

+

To shut down or resume the built-in

system speaker volume.

3.3 Using the Touchpad Pointing Device

Your computer comes with a built-in touchpad pointing device that is found

on the center of the palm-rest surface.

Notebook User Guide

88

The touchpad offers a number of options that let you customize how it

functions. To access these options, locate the Control Panel and double click

on the Mouse icon. The options let you control the size and color of the

cursor, cursor speed, the accepted double-click speed, and selection button

orientation.

The touchpad works a mouse pointing device replacement that is used under

Windows-based operating system. You can use the standard Microsoft driver

that is compatible with the touchpad device and is normally used under

Windows-based operating system. However, if you want to utilize the added

features of the touchpad, you may want to try installing its own device driver

that comes with added utilities for enhancing the function of the device.

1. Left Selection Button 2. Right Selection Button

3. Touchpad

Using Your Notebook 3

89

Touchpad Features

Here how to use the touchpad pointing device:

1. The rectangular surface acts like a miniature duplicate of your display

screen. To move the mouse cursor, place the finger lightly on the sensor

pad and move in the desired direction. If you reach the end of the pad, lift

your finger and place it back down on the other side of the pad.

2. To select an item, click on the item by pressing the left button control or

by simply tapping on the surface once. A light, quick tap always works

best. To execute an item, click the left button twice or do a quick double

tap on the surface.

3. To simulate holding the mouse button down (dragging an icon or

selection), use the tap-and-drag gesture. This feels much like a double-

click, except that the finger remains on the pad after the second tap: Tap,

lift, tap, hold and move. The simulated button remains held as long as the

finger remains on the pad.

4. When you press both the Left and Right click button at the same time, the

auto Scroll function will be activated.



Avoid spilling any liquid on the touchpad surface and always keep the

touchpad surface and pointing finger dry from sweat built-up. Also do not

expose touchpad to any magnetic source object.

3.4 Configuring Your Screen Display

The VGA display function of your notebook is based on a high performance

AGP local bus controller and is fully VGA compatible. This controller offers a

large set of extended functions and higher resolutions especially useful when

Notebook User Guide

90

you are connecting an external high-resolution and high-frequency CRT or

LCD.

Please Refer to Section 5 "Installing the Notebook Device Drivers" of Chapter

2 in this manual for the procedures on how to install the VGA device driver

under Windows. After installing the VGA driver, you would then configure the

display resolution or screen size to match your LCD display panel. This

notebook computer model provides Wide screen 15.4” 1280x800 (Wide XGA)

resolution panels. You would also probably want to set the amount of color

output to display sharper images and photos.

POSSIBLE DISPLAY CONFIGURATIONS

The table below shows you the possible display resolution you can set when

using either the LCD display or the external monitor (CRT):

Display Possible Resolution Maximum Colors

Widescreen

13.3” 1280x800

WXGA LCD

800 x 600

1024 x 768

1280 x 768

1280 x 800

16 million colors

16 million colors

16 million colors

16 million colors

CRT 800 x 600

1024 x 768

1152 x 768

1280 x 1024

16 million colors

16 million colors

16 million colors

16 million colors



65,536 or 64K colors is also equivalent to 16-bit high color while 16 million or

16M colors is equivalent to 32-bit true color.



You can use the <Fn> + <F3> hot-key to switch the display between LCD

only, CRT only, or both LCD and CRT display.

Using Your Notebook 3

91

CHANGING THE DISPLAY PROPERTIES UNDER WINDOWS

To change the display properties of your screen under Windows system, just

right-click on the desktop area and select Properties or go to the Control Panel

and click on the Display icon. The Display Properties dialog box will appear on

your screen. Click on the Settings tab to set your desired configuration. Make

sure to follow the configuration table above.



If you cannot configure the display properties, change the display driver

first as mentioned on Section 5 "Installing the Notebook Device Drivers" of

Chapter 2 in this manual. Consult your dealer for the latest Windows VGA

driver.

3.5 Knowing the Power Saving Features

One of the great features in your notebook computer aside from its superior

performance is the ability to save energy power. Your computer is designed to

incorporate intelligent and advanced power management functions that turn

off power of most components when system is idle or not in use. This feature

not only gives you longer battery hours but cooler systems and components as

well. For more information on how to control the power management features

of your computer, refer to Power Options function in Control Panel of

Windows.

The definitions of Standby Mode, Hibernation Mode, and Shutdown are

depicted as follows:

Standby Mode

Standby Mode is mainly for power saving. When the Standby Mode is

activated, your display and hard drive are shut down and all open applications

Notebook User Guide

92

and documents are stored in RAM (Random Access Memory). This allows

your notebook to wake up quickly, but a low level of power is required to

maintain this suspended state. How quickly your system powers down into

Standby mode is up to you by setting proper times in Power Options of

Control Panel in Window. While the notebook is in Standby mode, the LED

of power indicator flashes. To resume your working again

, you can press the

power button to return your work to the screen where you left off.

Hibernation Mode

In Hibernation mode, all system devices are powered down and the contents

of RAM are stored on your hard drive. Hibernate mode uses less power than

Standby mode, but takes a bit longer time to resume. When your notebook

goes into hibernation, Windows saves your entire desktop state before

powering down your computer. You don’t need to save and close each

document before you put your notebook into hibernation. When you press

power button again, system will bring your notebook out of hibernation. You'll

find your applications and documents open on your desktop exactly as you left

them.



Hibernation is enabled by default. To verify that Hibernation is enabledd,

Click

Start

, point to

Settings

, and then click

Control Panel.

Choose

Power Options

icon, then click on the

Hibernate tab

. IF the chock box

of Enable Hibernate is selected, the Hibernation mode is enabled.

Shutdown

All power has been turned off from the notebook. This means that no power

including external AC power source and battery power source will be consume

by the notebook.

Using Your Notebook 3

93

3.6 Working with the Built-in HDD

Your notebook computer is equipped with a built-in large capacity 2.5 inch

IDE hard disk drive where you store or install your computer operating system

and all application software programs. You need to format the hard disk

before using. The internal hard disk is normally assigned as Drive C after

formatting. Sometimes divided into two partitions, adding a Drive D. Since

your computer supports different hard disk capacities (up to 80 GB), you also

need to setup the disk type first on your computer’s BIOS SETUP program

before formatting the disk drive. Your computer supports Auto-detect hard

disk type, so you do not need to set it manually. Your dealer should already

have done all of this for you. You can refer to Chapter 6 on how to run the

BIOS SETUP program.

You can increase the system’s storage capacity by replacing the standard hard

disk drive with a drive of greater storage capacity.



If you wish to replace your hard disk, contact your local dealer for more

information about this dealer-installable device.



Always turn off your computer first before removing the hard disk drive.

Failure to do so will damage the computer and the hard disk. Avoid jarring

or moving the computer while the hard disk is still being accessed.

3.7 How to Access the Optical Drive

Your system ships with an optical disk drive installed on the right side of your

computer. You would normally use the drive for installing operating system

and software application programs.

To insert and remove a disc on the drive:

Notebook User Guide

94

1. Make sure the computer is turned on. Insert the Optical disk into the

drive slot with the label side facing up. The optical disk will be

automatically slide in the optical drive.

2. To remove the disc, press the eject button found on the left bottom side

of the optical drive.

3. The optical disk will pop-out slightly.

Using Your Notebook 3

95

How to care the Optical Disks (CDs, DVDs, etc.)

When you handle CDs, pay attention to the following guidelines:

• Always pick up the disk by its edges.

• Avoid scratching or soiling either side of the disk.

• Do not write with the hard ball-point pen or apply labels on either side of

the disk.

• Keep the disk away from direct sunlight or high temperatures.

• Clean fingerprints or dust from the disk by wiping it with a soft cloth.

The above points also apply to other optical storage media.



The Combo drive is a Class 1 Laser Product.

3.8 ExpressCard

WHAT IS EXPRESSCARD ?

The ExpressCard is a newly developed PC Card interface, its connector has

just 26 pins and the interface has a potential transfer rate of up to 500 MB/sec

(or 250 MB/sec in each direction) using a single-lane PCI Express link. Its

form factor is up to 40 percent smaller than a PC Card, which allows

ExpressCard modules to be included in smaller host systems. Designed for

both desktop and mobile use, ExpressCard use either USB 2.0 or a single lane

PCI Express technology.

The ExpressCard standard was developed by PCMCIA member companies

including technology leaders, system manufacturers, card manufacturers, from

all other parts of the PC Card industry.

Notebook User Guide

96

Dimensions of ExpressCard

Current CardBus PC cards are 54 millimeters wide. ExpressCard can divided

into two categories, based on width. Most designs will use the ExpressCard 34

design, which sets the width at 34 millimeters. For some applications, the wider

ExpressCard 54 standard will be used to produce cards that can handle the

higher thermal requirements of those applications.

All ExpressCard modules are 5mm thick but the standard also allows for card

developers to build longer 'extended' modules.

Native Bus Connection

The ExpressCard standard supports both the USB 2.0 and PCI Express

interfaces. Card manufacturers are able to choose whichever bus is appropriate

to their application; the performance of PCI Express, or from the wide range

of solutions supported by USB. All host PC ExpressCard slots will support

cards using either interface. The host platform no longer needs to incorporate

Using Your Notebook 3

97

a bridge chip between the chipset and the socket. PCI Express and USB 2.0

are fully hot-pluggable.

To support the broadest range of applications there are two sizes of module.

Both are smaller that today's CardBus card. The smallest card, the

ExpressCard/34 module, is almost half the size of a CardBus card. This size is

suited to a very broad range of applications covering communications, media,

and general purpose.

PC Card

(CardBus, Type II)

ExpressCard/54 ExpressCard/34

Data Transfer

rate

132 Mbps 500Mbps (or 250Mbps in each direction)

Connector pins 68 26

Port Type Parallel Serial

Dimensions

(HxWxD)

54mmx86mmx5mm 54mmx75mmx5mm 34mmx75mmx5m

m

A big part of "just working" will be the existing software support. Both

Windows XP and Windows Vista already support the ExpressCard

specification.

INSERTING AND REMOVING A EXPRESSCARD

Your computer includes hot swapping capability, that allows you to exchange

cards while the computer is turn on and start using it immediately.

Inserting ExpressCard

To insert a ExpressCard into the ExpressCard slot:

1. Locate the ExpressCard slot cover on the front side of the computer.

Notebook User Guide

98

2. Insert the side of ExpressCard with the 26-pin socket into the

ExpressCard slot. The face label of the card should also be facing up.

3. When the full length of the card is almost inside the slot, push firmly but

slowly, to ensure full connection with the computer. The ExpressCard will

be automatically detected and once the needed driver is installed, it will

generate a beep sound to indicate that the card is detected.

Using Your Notebook 3

99

Removing ExpressCard

To remove a ExpressCard from the ExpressCard slot, you should first disable

the ExpressCard card setting in the system as described followings:

1. Double click the ExpressCard icon on the right bottom side of the task

bar.

2. Select the socket from the list that you want to remove, and click Stop

button. The system then disables the function of ExpressCard card.

3. Then you can remove the inserted ExpressCard, push the ExpressCard to

the bottom to release the ExpressCard.

4. When the ExpressCard has moved out a space out of the slot, hold the

edges of the card and slowly slide it out.

Notebook User Guide

100



The power consumption of ExpressCard/54 is about 2.1W, while the

consumption of ExpressCard/34 is about 1.3W. To save energy, press the

button to disconnect the card when it is not in use.

3.9 Using Flash Memory Cards

WHAT IS FLASH MEMORY CARD?

Flash Memory is a memory storage media. It is used by most digital camera,

moreover, it can replace the traditional floppy disk. Flash memory card is built

with different form factor and brand name. Their size is smaller than PCMCIA

card. This computer supports most of the flash memory card, including SD,

MMC, MS (Memory Stick), and MS_Pro card.