Page 1
Notebook Specification
This appendix provides the technical specification of the MB02 notebook:
A.1 System Specification
Appendix
CPU Intel Pentium – M Processor
: Banias 1.3/1.4/1.5/1.6/1.7 GHZ
Core Logic
Cache Memory L1 Cache (Pentium Processor internal):
Intel Montara-GM (North Bridge) :
CPU(Banias) I/F
VGA Controller
LVDS I/F
DVOB&DVOC IF.
RGB analog I/F
200/266 DDR MEMORY I/F
Hub-Link I/F
Intel ICH4-M (South Bridge) :
Integrated Hub-Link I/F to connect with PCI
Dual IDE Master/Slave Controller ,Integrated
DMA Controller
1.1/2.0 Universal Serial Bus Host Controller
Integrated 10/100M Fast Ethernet MAC
Controller
Integrated Audio Controller with AC97 V2.2
Interface
Advanced Power Management(ACPI)
RTC
Integrated PCI to LPC Bridge
Integrated Audio Controller with AC97 Interface
PCI Bus Interface (PCI 2.2 compliant)
GPIO
Advance PIC
12KB code and 8KB data
8-way cache associativity provides
L2 Cache (Pentium Processor internal):
256KB Advanced Transfer Cache,8 way associativity
8-way set associative, 32-byte line size, 1 line per
sector
Bridge
FIC MB02 Service Manual A-1
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com
Page 2
Notebook Specification
System
Memory
BIOS ROM Flash ROM
Super I/O
RTC +
NVRAM
K/B Controller
PMU New PMU08
VGA
Controller
VRAM Share system memory, UMA (using DVMT configuration)
TV out encoder None
CardBus
Controller
Sound
Modem Askey / Actiontec MDC modem
Expansion Memory: 2 SO-DIMM Slot (1.25”)
Size: 128/256/512MB/1G
Type: DDR DRAM, 3.3V
Data Path: 64Bit
Frequency : 266/200MHz
Please refer to the MB02 Key component list in detail.
1st Vendor : SST 49LF004A TSSOP Package 4Mbit LPC
flash ROM
2nd Vendor : <TBD>
4Mbit, 32 pin TSSOP package
PS: PLCC32 Package is just for DEBUG
None
Integrated in South Bridge (Intel ICH4-M)
Real Time Clock with 256 byte extended CMOS.
IBM AT Clock/Calendar/Alarm (14 Bytes)
Mitsubishi M38859 LPC KBC
Internal K/B, Touch Pad, External K/B or M/S
Supported A20Gate,firmware version 2.14
Mitsubishi M38859FFHP
Embedded Controller
Embedded in Intel Montara-GM
High Performance and high quality 3D
accelerator
Integrated dual DVO bridge
Integrated LVDS Interface
Integrated RGB analog Interface
High performance 2D accelerator
Complete TV-OUT/Digital Flat Panel Solution
RICOH R5C551 (PCI Card Bus controller)
PC/Card Bus Type II x1
Build in smart card (none)
AC’97 CODEC
Realtek ALC202
AC’97 Revision 2.2 Compliant
V.90, K56flex, ITU-T V.34, V.32, RJ11 Jack
TIA/EIA 602, V.42
ITU-T V.17, V.29, V.27ter, V.21 Ch2
TIA/EIA 578 Class1 FAX
Wake up on Ring
A-2 FIC MB02 Service Manual
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com
Page 3
Notebook Specification
On board LAN Intel ICH4-M + Intel 82562EZ
Support LAN boot
Support for auto-negotiation (10BASE-T and 100BASETX)
Wake up On LAN
3com Combo
802.11b Support by Intel Calexico Mini-PCI Wireless LAN Card
<Design Ready Only>
1394 RICOH R5C551, support one port
Cellular I/F Support PDC/PIAFS/CdmaOne/Dupa(None)
USB
Intel ICH4-M
IDE Interface
(Intel ICH4-M)
Printer
Interface
Serial Interface
External PS/2
Port
(M38859)
Universal Serial
Bus
(Intel ICH4-M)
Integrated in South Bridge Intel ICH4-M)
USB v.1.1 and Intel Universal HCI v.1.1 compatible
USB v.2.0 and Enhance Universal HCI v.2.0 compatible
Eighteen level (doublewords) data FIFO with full scatter
and gather capability
Root hub and four function ports
Integrated physical layer transceivers with optional
over-current detection status on USB inputs
Fast IDE, 2 ports:
--Integrated multithreaded I/O link mastering with read
pipelined streaming
--Dual independent IDE channel each with 16 DW FIFO
--Native and compatibility mode
--PIO mode 0,1,2,3,4, and multiword DMA mode 0,1,2
--Ultra DMA 33/66/100
None
None
External Keyboard or PS/2 Mouse
Exclusively connected.
Can use both device by using branch cable(option)
--Integrated multithreaded IO link mastering
--Dual independent OHCI controllers with root hub
--Support up to 6 USB ports
--Support legacy devices
--Over current detection equipped
--Option to separately configure each port as a wake-up
source
FIC MB02 Service Manual A-3
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com
Page 4
Notebook Specification
A.2 Display Specification
14.1” TFT LCD (AU)
LCD Model AU 14.1
LCD Type 14.1” TFT
Display Pixels H1024 x V768 pixels
Pixel Arrangement RGB vertical stripe
Display colors 262K Colors
Module Size 298.5(W) x 227.5(H) x 5.8(D) [mm]
Weight Approx. 500g
Contrast Ratio
Power Supply 3.3V
Response Time 30ms (max)
Operating Temperature
Storage Temperature -20 to 60 degrees Celsius
A.5 DVD/ RW Combo Drive Specification
200:1 (typ.)
0 to 50 degrees Celsius
Drive Manufacturer KME UJDA745
Physical Dimension
Weight 250g +/- 10g
Loading Manual tray loading
Ejection
Host Interface Enhanced IDE (ATAPI)
Average Access Time 150ms Typ.
Data Transfer Rate (burst) 16.7 MByte/s (PIO Mode 4)
Data Transfer Rate (sustained) Max. 2,100Kbyte/s (CD-RW) ; Max.3,600Kbyte/s(CD)
Data Write Rate Max. 1,200Kbyte/s (CD-R) ; Max.600Kbyte/s(CD-RW)
Starting Time
Data Buffer Capacity 2MB
Supply Voltage +5VDC +/- 15%
MTBF
128.0 x 12.7 x 129 [mm] ( W * H * D )
Manual eject using the eject button
Auto eject using the eject command on software
16.7 MByte/s (Multi word DMA transfer mode-2)
33.3 MByte/s (Ultra DMA transfer mode-2)
Max. 10 sec (from stand by to ready)
50,000POH or more
A.6 Keyboard Specification
Keyboard Type ALLTOP PAN-international
Type of key switch Membrane (PE) Switch
Number of keys 87 keys with embedded numeric keypad
Compatibility Enhanced 101/102 emulation
Travel
Keyboard Height
3.0 mm ± 0.3 mm
6.5 ± 0.3 mm
7.0 ± 0.3 mm (SPACE Key)
A-4 FIC MB02 Service Manual
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com
Page 5
Notebook Specification
Keycap Pull Off Force
Supply Voltage 6V
Operating Temperature -10 to 60 degrees Celsius
500g
≥
A.7 Touch Pad Specification
Interface PS/2 (compatible with Microsoft Mouse Driver)
Supply Voltage 5V
Supply Current 4.0mA (Max) Operating
Dimension W65 x H49 x D2.82 (D1.07 PCB ) mm
Weight 8g.
Operating Temperature 0 to 60 degrees Celsius
Storage Temperature -40 to 65 degrees Celsius
A.8 On board Modem Specification
Modem Type Askey / Actiontec
Wake Up Function Supports Ring-in Resume Wake Up function
Connection Mode V.90 Kbps
Speakerphone Full duplex speakerphone (FDSP)
Fax Transmission Way Half Duplex
Modem Speed 56 Kbps
Modulation Format V.90 PCM
A.9 On board LAN Specification
LAN Type
Speed 10/100 Mbps
Wake Up Function Supports Wake-on-LAN (WOL) function
Intel ICH4-M + Intel 82562EZ
A.10 Power Supply
AC POWER ADAPTER
Input Voltage 100 to 240VAC
Input Frequency 50 to 60 Hz
Input Current 1.32A Max at 110VAC
0.66A Max at 220VAC
Efficiency 83% Min
In-Rush Current (Cold Start) 50A Max at 100 VAC
100A Max at 240 VAC
Output Power 60W
Output Voltage +16Vdc (main)
Output Current 3.16A (Max)
Over Voltage Protection 24V Max
Over Current Protection 19V / 5A (max)
FIC MB02 Service Manual A-5
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com
Page 6
Notebook Specification
Dimension L110 x W50 x H29 [mm]
Weight 250g
BATTERY PACK
Model Sanyo Li-Ion Rechargeable Smart Battery
Cell Number 8
Rating (Nominal) Voltage 14.4V
Typical Capacity 3600 mAH
Watts 52 W
Charging Voltage 16.8V
Charging Efficiency 100%
EVD1 14.0V
EVDF 12.0V
A.11 Inverter Specification
Input Voltage 5.0V
Start Voltage 1200Vrms (min)
Output Current 6mA (max)
Frequency 30~70KHz
Efficiency 75% (min)
Brightness Control Voltage 0.94~1.86V
A.12 DC/DC Specification
Controller PMU 08
Input Voltage 8 ~ 20V
Output Current 4A (5V) / 4A (3.3V) / 100mA (12V)
Frequency 200KHz
Support Mode OVP / OCP
A.13 Charger Specification
Controller PMU 08
Input Voltage 18.5 ~ 20V
A.14 Mechanical Specification
Unit Dimensions
(W x D x H) in millimeters
Unit Weight
310MM X 266MM X 27.3 MM (H)
SUPPORTS KENSINGTON LOCK
AROUND 2.54 KG OR 4.5 LBS WITH 14.1” LCD SYSTEM
WITH HDD, FDD, CD-ROM AND ONE LI-ION BATTERY
PACK
A-6 FIC MB02 Service Manual
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com
Page 7
Notebook Specification
A.15 Environmental Requirements
Temperature
Operating Temperature
Storage Temperature
Humidity
Operating
Storage
Shock (Non-operating)
Unpacked
Drop
Package
Electro-Static Discharge (ESD)
5oC to 35oC
-20oC to 60oC
10% to 80% RH without condensation
5% to 90% RH without condensation
Acceleration: 30G/50G
Duration Time: 11ms
No. of Times: 3 Times
Direction: 6 face
Drop Height: 91cm (under 10Kg)
76cm (over 10Kg)
Drop Phase: 1 corner, 3 line, 6 face
Contact: +/- 6KV
Air: +/-10KV
FIC MB02 Service Manual A-7
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com
Loading...