Fiberlink 5100-B7L, 5101-B7L, 5102-B7L, Fiberlink 5100 Series, 5102-B1L User Manual

Single Color (Black)

Fiberlink®

5100 Series

10/100/1000 Base-T Ethernet over one
or two single mode or multimode bers.

World Headquarters

125 Comac Street
Ronkonkoma, New York 11779 USA
Tel: [phone]
Fax: [phone]

[e-mail]

commspecial.com

Communications Specialties’ Fiberlink® 5100 User’s Manual

Transmit 10/100/1000 Base-T

Ethernet over one or two single

mode or multimode bers.

The 5100 Series is full-featured

with auto-sensing 10/100/1000

Mbps Ethernet port with Auto

MDIX and full and half duplex

support. And, of course, the

signal delity you have come to

expect from Fiberlink®!

Fiberlink® 5100 Series User’s Manual

Fiberlink® 5100 Series

Contents

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Technical Specications

Model Part Number Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

General Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Operating Loss Budgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Maximum Useable Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Ethernet Cable Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Indicator LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Operating Pointers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Maintenance and Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Certications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Accessories and Related Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Contents

Page 3Fiberlink® 5100 Series User’s Manual

Fiberlink® 5100 Series

Welcome

Thank you for purchasing Communications Specialties, Inc.’s Fiberlink® 5100 Series. The

5100 Series is used to transmit 10/100/1000 Base-T Ethernet over one or two single mode

or multimode ber optic cores. The Fiberlink 5100 Series automatically adapts to the high-

est level of performance supported by the device connected to the Ethernet port. When the

connected device is a switch or a workstation that supports full-duplex, the Fiberlink 5100

adapts to the full-duplex mode and provides an eective 2000 Mbps bandwidth. When the

connected device is a HUB or a workstation that supports only half-duplex, the Fiberlink

5100 adapts to half-duplex mode providing the nominal 1000 Mbps.

With high performance data transmission and easy installation, the Fiberlink 5100

provides the ultimate ISP network solution for FTTH (Fiber To The Home), FTTC (Fiber To The

Curb) or for ISPs for FTTB (Fiber To The Building), and can also be utilized for small

oce network environments.

Features

• Auto-sensing 10/100/1000 Mbps Ethernet port with Auto MDIX

• IEEE 802.3, IEEE 802.3u, IEEE 802.3az, & IEEE 802.3z

• Full-duplex and half-duplex

• LEDs indicate Link Activity, Speed, Fault Detection/Collisions and Power

• Single mode & multimode versions available

• One or Two ber versions available

• Compact design, wall mountable

Package Contents

• One Fiberlink® 5100 Series Unit

• This User’s Manual

• Mounting Brackets

Welcome | Features | Package Contents

Fiberlink® 5100 Series User’s Manual

Fiberlink® 5100 Series

Model Part Number Specication

Fibers Unit Type Part Number 1000-Base-X

1 Single Mode or Multimode (1310/1490 nm) 5100-B7L BX10-U

1 Single Mode or Multimode (1490/1310 nm) 5101-B7L BX10-D

2 Single Mode or Multimode (1310 nm) 5102-B7L LX/LH

2 Multimode (850 nm) 5102-B1L SX

General Specications

Maximum Speed (1000Base-Tx/Fx) Full Duplex: 2000Mbps
Half Duplex: 1000Mbps

Packet Forwarding Rate 14880pps@10Mbps
148800pps@100Mbps
1488000pps@1000Mbps

Cabling/Maximum Distance See Optical Loss Budget &
Maximum Useable Distance sections
of this manual

Connectors Copper: RJ-45(Auto-MDI / MDI-X)
Fiber Optic: LC type

LEDs TX: LINK/ACT, SPD, FD / COL
FX: LINK/ACT, SPD, FD / COL
Power

Launch Power/Receiver Sensitivity 1 Fiber SM: -8 dBm min / -23 dBm max
2 Fiber SM: -9 dBm min / -21 dBm max
2 Fiber MM: -9 dBm min / -18 dBm max

Power Requirements Input: 100-240VAC, 50/60Hz
Output: 12V/1A

Operating Temperature Range 0 to +40º Celcius

Operating and Storage Humidity 10% to 90% relative humidity
(non-condensing)

Weight 2 pounds

Dimensions 4.25” x 3.14 “ x 1.02”
(108mm x 80mm x 26mm)

Technical Specications

Technical Specications