FiberHome AN5506-04-F, AN5506-04-F2 User Manual

AN5506-04-A
GPON Optical Network Unit
User Manual
Version: A
Code: MN000000423
FiberHome Telecommunication Technologies Co., Ltd.

Thank you for choosing our products.

We appreciate your business. Your satisfaction is our
goal. We will provide you with comprehensive technical
sup port and after-sales service. Please contact your
local sales representative, service representative or
distributor for any help needed at the contact information
shown below.
Fiberhome Telecommunication Technologies Co., Ltd.
Address: No. 5 Dongxin Rd., Hongshan Dist., Wuhan, China
Zip code: 430073
Tel: +86-27-87691549
Fax: +86 -27 -87691755
Website: http://www.fiberhomegroup.com
r
r

Legal Notice

are trademarks of FiberHome Telecommunication Technologies Co., Ltd.
(Hereinafter referred to as FiberHome)
All brand names and product names used in this document are used fo
identification purposes only and are trademarks or registered trademarks
of their respective holders.
TM
TM
TM
All rights reserved
No part of this document (including the electronic version) may be
reproduced or transmitted in any form or by any means without prio
written permission from FiberHome.
Information in this document is subject to change without notice.

Operation Safety Rules

High optical power can cause bodily harm, especially to eyes.
Never look directly into the end of the optical transmitter fiber
jumper or the end of its active connector.
Exercise care if you must bend fibers. If bends are necessary,
the fiber bending radius should never be less than 38mm.
Power socket overload, broken cables or broken plugs may
cause electric shock or fire. Regular check-ups on power
supply wires and cables are essential. If any appears
damaged, replace it at once.
Use the power supply adapter provided in the package only.
Using other adapters may cause equipment damages or
operation failures.
Install the equipment in ventilated environment without high
temperatures or direct sunlight to protect the equipment and
its components from overheating, which can result in
damages.
I
Avoid moisture, dampness and water damage. Equipment
exposed to water cannot work normally and can be extremely
hazardous due to shorting.
Do not lay this equipment on an unsteady base.
II

Packing List

After opening the packing case of the AN5506-04-A, please check
whether the accompanied articles are in the packing case according to
the packing list as below:
Item Quantity Remarks
AN5506-04-A 1 -
Certificate of quality 1 -
User manual 1
DC power adapter with two pins
RJ45 connector 5 -
1
AN5506-04-A GPON Optical Network Unit User Manual
DC power adapter with two pins for the AN5506-04-A
III

Contents

1Product Introduction ......................................................................... 1-1
1.1Product Functions.................................................................... 1-1
1.2 Product Types .......................................................................... 1-3
1.3 Technical Specifications ........................................................... 1-4
2 Appearance Description ................................................................... 2-1
2.1 Top Panel and LED Indicators ................................................. 2-1
2.2 Rear Panel and Interfaces ....................................................... 2-3
3 Product Installation ........................................................................... 3-1
3.1 Preparation Before Installation ................................................ 3-1
3.1.1
Unpacking Check ....................................................... 3-1
3.1.2Installation Precautions .............................................. 3-1
3.2 Placing the Device ................................................................... 3-2
3.3 Cable Connection .................................................................... 3-2
3.3.1 Connection of Network Cable .................................... 3-2
3.3.2 Connection of Optical Fiber ........................................ 3-3
3.3.3 Connection of Power Cable ....................................... 3-4
3.4 Examination after Installation ................................................... 3-5
4
FAQs ............................................................................................... 4-1
Loading...
+ 26 hidden pages