FiberHome AN5506-04-F, AN5506-04-F2 User Manual

AN5506-04-A

GPON Optical Network Unit

User Manual

Version: A

Code: MN000000423

FiberHome Telecommunication Technologies Co., Ltd.

May 2010

Thank you for choosing our products.

We appreciate your business. Your satisfaction is our

goal. We will provide you with comprehensive technical

sup port and after-sales service. Please contact your

local sales representative, service representative or

distributor for any help needed at the contact information

shown below.

Fiberhome Telecommunication Technologies Co., Ltd.

Address: No. 5 Dongxin Rd., Hongshan Dist., Wuhan, China

Zip code: 430073

Tel: [phone]

Fax: [phone]

Website: http://www.fiberhomegroup.com

r

r

Legal Notice

are trademarks of FiberHome Telecommunication Technologies Co., Ltd.

(Hereinafter referred to as FiberHome)

All brand names and product names used in this document are used fo

identification purposes only and are trademarks or registered trademarks

of their respective holders.









 





TM



TM

TM

All rights reserved

No part of this document (including the electronic version) may be

reproduced or transmitted in any form or by any means without prio

written permission from FiberHome.

Information in this document is subject to change without notice.



Operation Safety Rules

 High optical power can cause bodily harm, especially to eyes.

Never look directly into the end of the optical transmitter fiber

jumper or the end of its active connector.

 Exercise care if you must bend fibers. If bends are necessary,

the fiber bending radius should never be less than 38mm.

 Power socket overload, broken cables or broken plugs may

cause electric shock or fire. Regular check-ups on power

supply wires and cables are essential. If any appears

damaged, replace it at once.

 Use the power supply adapter provided in the package only.

Using other adapters may cause equipment damages or

operation failures.

 Install the equipment in ventilated environment without high

temperatures or direct sunlight to protect the equipment and

its components from overheating, which can result in

damages.

I

 Avoid moisture, dampness and water damage. Equipment

exposed to water cannot work normally and can be extremely

hazardous due to shorting.

 Do not lay this equipment on an unsteady base.

II

Packing List

After opening the packing case of the AN5506-04-A, please check

whether the accompanied articles are in the packing case according to

the packing list as below:

Item Quantity Remarks

AN5506-04-A 1 -

Certificate of quality 1 -

User manual 1

DC power adapter with two
pins

RJ45 connector 5 -

1

AN5506-04-A GPON Optical Network
Unit User Manual

DC power adapter with two pins for the
AN5506-04-A

III

Contents

1 Product Introduction ......................................................................... 1-1

1.1 Product Functions.................................................................... 1-1

1.2 Product Types .......................................................................... 1-3

1.3 Technical Specifications ........................................................... 1-4

2 Appearance Description ................................................................... 2-1

2.1 Top Panel and LED Indicators ................................................. 2-1

2.2 Rear Panel and Interfaces ....................................................... 2-3

3 Product Installation ........................................................................... 3-1

3.1 Preparation Before Installation ................................................ 3-1

3.1.1

 Unpacking Check ....................................................... 3-1

3.1.2 Installation Precautions .............................................. 3-1

3.2 Placing the Device ................................................................... 3-2

3.3 Cable Connection .................................................................... 3-2

3.3.1 Connection of Network Cable .................................... 3-2

3.3.2 Connection of Optical Fiber ........................................ 3-3

3.3.3 Connection of Power Cable ....................................... 3-4

3.4 Examination after Installation ................................................... 3-5

4

 FAQs ............................................................................................... 4-1