Fibaro FGBHFS-101 User Manual

OPERATING

MANUAL

EN

FIBARO FLOOD SENSOR

FGBHFS-101

CONTENTS

#1: Description and features 3
#2: Powering the accessory 4
#3: Pairing the accessory 5
#4: Physical installation 6
#5: Reset 7

v1.1

#6: Functionalities 8
#7: Congurable parameters 9
#8: Specications 10
#9: Regulations 11

2

Important safety information

Read this manual before attempting to install the device!

!

Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.

HomeKit technology

Apple HomeKit technology provides an easy, secure way to control

HomeKit-enabled accessories using Siri on your iPhone, iPad, or iPod
touch.

After installing your FIBARO Flood Sensor, congure it from a
compatible app with just a few simple steps.

You can even create your own custom scenes to control your home
settings. For example, you can create a scene to automatically turn
o the lights, lock your doors, close the garage door, and set the
thermostat to the desired temperature in just one step.

To control this HomeKit-enabled accessory, iOS 9.3.5 or later is

i

recommended.

Controlling this HomeKit-enabled accessory automatically and
away from home requires an Apple TV with tvOS 9.2 or later or
an iPad with iOS 9.3 or later set up as a home hub.

#1: Description and features

FIBARO Flood Sensor is a HomeKit-enabled water sensor using

Bluetooth® low energy technology.

Along with detecting ooding, the accessory measures the ambient
temperature.

Tampering is detected whenever the accessory is moved or casing is
opened.

Built-in LED indicator and an acoustic alarm signal ooding and
tampering. The LED can be also used to identify the accessory.

The accessory is designed to be placed on the oor or mounted on a
wall (in this case sensor should be extended using an external probe).

The accessory is sink-proof, which means it drifts on the water surface
and keeps on sending alarm signal in case of substantial inundation
of water.

3

Main features of FIBARO Flood Sensor:

• compatible with Apple HomeKit technology

• Bluetooth® low energy technology for wireless communication

• detects ooding

• detects tampering using accelerometer or when the casing is opened

• easy installation - simply put on a surface prone to ooding

• may be installed anywhere - sensor can be extended using
an external probe (not included)

• battery powered

• indicates state using LED diode and buzzer

DESCRIPTION AND FEATURES

4

#2: Powering the accessory

1. Turn the cover counter-clockwise and open it.

NOTE

i

If the accessory blinks
green after powering,
it is already paired and
has to be reset to pair
again.

2. Remove the battery blocker.

3. The accessory will glow red – it is ready to be paired.

4. Close the cover and turn it clockwise.

POWERING THE ACCESSORY