Fibaro FGBHDW-002 User Manual

OPERATING

MANUAL

EN

FIBARO DOOR/WINDOW SENSOR

FGBHDW-002

CONTENTS

#1: Description and features 3
#2: Powering the accessory 4
#3: Pairing the accessory 5
#4: Physical installation 6
#5: Reset 7

v1.1

#6: Functionalities 8
#7: Congurable parameters 9
#8: Specications 10
#9: Regulations 11

2

Important safety information

Read this manual before attempting to install the device!

!

Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.

HomeKit technology

Apple HomeKit technology provides an easy, secure way to control

HomeKit-enabled accessories using Siri on your iPhone, iPad, or iPod
touch.

After installing your FIBARO Door/Window Sensor, congure it from
a compatible app with just a few simple steps.

You can even create your own custom scenes to control your home
settings. For example, you can create a scene to automatically turn
o the lights, lock your doors, close the garage door, and set the
thermostat to the desired temperature in just one step.

To control this HomeKit-enabled accessory, iOS 9.3.5 or later is

i

recommended.

Controlling this HomeKit-enabled accessory automatically and
away from home requires an Apple TV with tvOS 9.2 or later or
an iPad with iOS 9.3 or later set up as a home hub.

#1: Description and features

FIBARO Door/Window Sensor is a HomeKit-enabled Hall eect

sensor using Bluetooth® low energy technology.

Along with detecting opening/closing, the accessory measures the
ambient temperature.

Opening is detected by separating the sensor’s body and the magnet.

Tampering is detected whenever the accessory is detached from the
surface or casing is opened.

Main features of FIBARO Door/Window Sensor:

• compatible with Apple HomeKit technology

3

• Bluetooth® low energy technology for wireless communication

• detects opening/closing using Hall eect sensor

• measures ambient temperature

• detects tampering

• easily mounted on doors, windows, garage gates and roller blinds

• battery powered

• indicates state using LED diode

• 7 color variations

DESCRIPTION AND FEATURES

4

#2: Powering the accessory

1. Open the cover.

2. Remove the battery blocker.

NOTE

i

If after powering ac­cessory blinks three
times, it is already
paired and has to be
reset to pair again.

3. The accessory will glow blue for 1.5 seconds – it is ready to be

paired.

4. Close the cover paying attention to the correct orientation of the

cover and sensor’s body.

POWERING THE ACCESSORY