FGM Enterprises FAMILY FLAKER MILL User Manual

FGM ENTERPRISES, INC. – FAMILY GRAIN MILL

® SYSTEM

LIMITED WARRANTY 5 year warranty

Should any manufacturing defect be discovered, FGM ENTERPRISES, Inc. agrees to
repair or replace the defective product or part at their expense, other than handling and

return freight charges, provided The Family Flaker Mill

attachment

is returned with
shipping charges prepaid.
This warranty is for the original purchaser and is for normal home use only. This
warranty is non-transferable.
This warranty does not apply to any unit that has been tampered with or to damage
incurred through negligence, misuse, faulty packing or mishandling in transit by any
common carrier or by damage caused by foreign objects used before, during or after the
milling process. Unclean grain sometimes will contain rock and/or metal objects, which can
cause damage to your mill. Always use quality, clean grains. Never grind POPCORN.
Upon receipt of you mill and attachments inspect all attachments for parts.
Report any missing pieces within two week of receipt of mill. FGM ENTERPRISES, Inc.
will not replace any missing parts after two week of receipt of mill.
NOTE: The warranty given by FGM DOES NOT APPLY to the appearance of
any Product or to any Product which has been subjected to misuse, mishandling or service
by any unapproved service person or to any Product which has been damaged, defaced,
modified, altered or tampered with, whether externally or internally or to any product sold
or used outside United States of America or Canada.

The SOLE AND EXCLUSIVE REMEDY under this warranty is REPAIR OR
REPLACEMENT AT CRIS’S OPTION of any Product that proves to be defective in
manufacture or materials within the 5 years period from the date of purchase. TO THE
FULLEST EXTENT PERMITTED BY LAW, CRIS DISCLAIMS ALL LIABILITY FOR ANY
OTHER DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ALLEGED TO BE
CAUSED BY A DEFECTIVE PRODUCT, IE. CRIS WILL NOT BE RESPONSIBLE FOR
ANY PERSONAL INJURY, PROPERTY DAMAGE OTHER THAN THE COST OF
REPLACING THE PRODUCT OR ANY OTHER MONETARY DAMAGES SUCH AS LOST
WAGES OR PROFITS CAUSED BY ANY USE OR INABILITY TO USE THE PRODUCT.

By using this product, YOU AGREE THAT REPAIR OR REPLACEMENT AT FGM’s option
will fully satisfy FGM’s warranty obligation to you, whether in contract, tort negligence, strict
liability or other applicable law.

To avoid malfunctions, do not drop the unit, or subject it to strong shocks. The warranty
does not cover any breakage due to this type of incident. Be sure to check the grain for
rocks or any foreign object. The warranty doe not guarantee any breakage due to any
foreign object that is passed through the mill.

SHOULD SERVICE BE REQUIRED:

1. Carefully pack the Product along with all of its accessories and other original

materials in the original carton and packing materials (if still available) or in another
suitable carton with sufficient protective padding to avoid injury to the Product during
shipping.

2. YOU MUST ENCLOSE:

Your original packing slip or other proof of date and purchase.
Your check or money order for $16.00, payable to FGM ENTERPRISES, INC.
A note describing the problem that needs to be repaired.

3. Ship the Products, prepaid by Insured Parcel Post or Insured United Parcel Services

(UPS) to:
FGM ENTERPRISES, INC.
1116 SAINT AUGUSTINE RD
Daytona Beach Fl 32114

FAMILY FLAKER MILL

BOSCH UNIVERSAL SYSTEM

USER’S GUIDE

The Family Flaker Mill is designed and built to give many years of service.

Before the first use, clean the flaker attachment with a dry cloth.

DO NOT USE CORN or BEANS IN THE FLAKER. THE FLAKER WAS DESIGNED TO
ONLY ROLL OR FLAKE OATS, GRAINS AND SEEDS.

Use only well cleaned grain. No guarantee will be granted if repair should become
necessary due to use of unclean grain, containing a lot of impurities, or because
foreign bodies (metal pieces, sand, pebbles, and or plastic parts) had been milled.

Never look over the hopper while flaking. Large grain can fly out of hopper.

Cleaning - Unplug from outlet when not in use, before putting on or taking off parts and
before cleaning. Always remove the attachments before disassembling or reassembling.

Never use harsh cleansers, chemicals or abrasive cleaners. Nylon and metal brushes
cannot be used. Non-kitchen detergents or bleach should not be used. Do not put The
Family Grain Mill attachment, or Flaker Mill attachment in the dishwasher.

IMPORTANT REMARKS:

Use only well cleaned grain to roll oats or flake grains. Hard foreign bodies such as small
stones, may damage the conveyer screw on the grain mill or the knurled roller on the flaker
mill. If the grain does not fall freely, grain particles may be sticking.

Avoid contacting moving parts. Keep fingers out of discharge opening or hopper. Never put
a hard object in the hopper while the machine is operating.

Wipe clean with a damp cloth and dry thoroughly. The guarantee does not apply in as of
damage due to inappropriate handling.

OPERATING THE FAMILY FLAKER MILL ON THE BOSCH UNIVERSAL MIXER

WHAT CAN BE FLAKED?

Any dry grains, or seeds such as Oats, wheat, rye, barley, spelt, kamut buckwheat ,millet
linseed, flax seed, coriander, cumin, fennel.

CLEANING THE FLAKER MILL

From time to time, or if the Family Flaker Mill has not been used form sometime, we
recommend a through cleaning of the mill work.
Clean the millwork with a dry soft brush. Do not immerse the parts in water or clean them
under running water. Wipe off the parts of the housing with damp cloth. The roller and the
cone should be cleaned dry with a soft brush. NEVER PUT THE FLAKER MILL IN THE
DISHWASHER.

DISMANTLING THE FLAKER MILL ATTACHMENT:

Unplug your Bosch Universal Mixer
Remove the flake mill from the Bosch Universal Mixer before dismantling the flaker mill.
Remove the funnel, (6) untighten the screws (5), Remove the housing (4) pull the knurled
roller (3), remove the key (2).

ASSEMBLING THE FLAKER MILL ATTACHMENT

The flaker mill must be removed from the Bosch Universal Stand Mixer before re­assembling the flaker mill.

1. Insert the key (2) into the slot that is provided in the front housing.

2, Push in the knurled roller (3).

3. Place the back housing piece against the front piece and fix it with the screws (5) 4.
replace the funnel.

1. Housing

2. Key

3. Knurled roller

4. Housing

5. Screws

6. Funnel

MOUNTING

ATTACHMENTS TO THE BOSCH UNIVERSAL STAND MIXER

1. Before attaching the grain mill or flaker mill, turn off and unplug the mixer.

2. Place the Bosch Universal Mixer on it’s side.

3. Insert the grain mill with the silver notch fitting into the coupling of the Bosch Universal
Mixer

4. The white lever on the back of the flaker mill will lock in the mill. The lever should be
pointing to 9 o’clock and must be turned clockwise until the lever has locked the flaker
mill on to the mixer (pointing to 3 o’clock.)

5. Place the hopper into the opening.

REMOVING

ATTACHMENTS TO THE BOSCH UNIVERSAL STAND MIXER

1. Before removing the grain mill or flaker mill, turn off and unplug the mixer.

2. Remove the hopper

3. Turn the white Lever on the back of the flaker mill from the 3 o’clock position to the
9 o’clock position

4. Remove the Flaker Mill.

FLAKER MILL

ILLUSTRATED ON BOSCH MIXER