Fezz Audio Titania, Silver Luna PRESTIGE, Alfa Lupi User Manual

Titania

USER’S MANUAL

2

SAFETY TIPS______________________________________________

• Never place the Fezz Audio Titania amplifier near heat sources, such as radiators,

heaters or direct sunlight. Ensure adequate ventilation and airflow

• We also warn against exposure of the amplifier to conditions such as very low

temperatures and/or high humidity.

• During normal operation, the vacuum tubes radiate significant amounts of heat -

there is a risk of burns.

• The amplifier should be plugged directly into a wall socket. If you must use an

extension cord, please make sure that it has load parameters sufficient to ensure
proper handling of current delivery to the device.

• When cleaning, always disconnect the Titania amplifier from the power source. Usea

dry, soft cloth. Do not use water or cleaning agents.

• If your amplifier starts to misbehave or to work incorrectly, if it’s temperature gets

too high or you start feeling smoke - immediately disconnect the device from the
mains.

• Due to the risk of exposure to high voltages – please do not open the lid of the

amplifier. ATTENTION: This warning remains in force also in a situation where the
device is already disconnected from the wall outlet.

• Always replace fuses in accordance with the original, intended specification.

• Do not make repairs on your own, or adjustments beyond those as described in this

manual. Execution of any unauthorized repairs or modifications of the device result
in a loss of warranty.

In order to obtain the highest possible sound reproduction quality and
for the sake of your own safety, please kindly refer to the following
safety guidelines and please adhere to them.

3

TABLE OF CONTENTS_______________________________________

SAFETY TIPS 2

INTRODUCTION 4

Vacuum tube amplfier 4

INSTALLATION OF THE DEVICE 5

Unpacking 5

Contents of the package 5

Discription of elements of the amplifier 6

Installation of the vacuum tubes 7

Where to place Your amplifier 7

INTERCONNECTIONS 8

Hook-up of the speakers 9

Hook-up of the signal sources 9

Hook-up of the supply cord 9

FIRST POWER-UP AND GETTING STARTED 9

„Burning-in” the amplifier 10

Replacement of the vacuum tubes 10

OPTIONAL EQUIPMENT 11

Vacuum tube protective cage 11

HT (pre-in) input 11

Remote control 11

TROUBLE-SHOOTING GUIDE 12

TECHNICAL DATA 12

DECLARATION OF CE CONFORMITY 13

WYGRZEWANIE WZMACNIACZA ___15___

POSTEPOWANIE W PRZYPADKU AWARII ___16___
DANE TECHNICZNE ___17___

WARUNKI GWARANCJI OGRANICZONEJ ___18___

4

INTRODUCTION___________________________________________

Thank you for your trust and for choosing the Fezz Audio Titania amplifier.

At times when the audio world becomes increasingly digital, Fezz Audio does not forget
about analog lovers. Titania is the Polish, series produced integrated vacuum tube amplifier,
which is designed for both people starting out in their audio adventure, but also for those
experienced with the “vacuum tube sound” before. The Fezz brand is a team of people who
are fascinated since multiple years with theworld of sound in its pure, analog form, a team
which adapts proven technologies so as to meet the expectations of a contemporary
audience.
We invite you to familiarize yourself with a clear sound, characterized by excellent
separation, imaging and dynamics. Let the wide sound scene take on a new, multiple depths
dimension.

VACUUM TUBE AMPLIFIER

Many of us, when looking upon audio amplifiers of decades ago, keep repeating a slogan,
like a mantra: "Such things are not manufactured anymore". When we finalny manage to
acquire such a amplifier, we treat it in a very unique way. We look for the best possible
location to present it, we adore the moment that we switch it on and we shall certainly not
fail to mention in passing about this new "treasure" of ours to Any of our visiting guests.
Whatever we do is all underlined by a great feeling of fondness to those times long past.
Why is this happening? The most likely reason is that it is a vacuum tube amplifier. An
amplifier with a specific warmth to its sound, with a natural ambience, timber. We also do
know that the ‘Big Names’ have created their memorable music albums using vacuum tubes.
When one explores this topic in depth, it turns out that many a prominent musician, till this
present day, plays backmusic and creates music using solely analog amplifiers, and they
justify their decision with just a few words: "The vacuum tube simply sounds better, it has a
soul and an ambience".

Once that we purchase such an amplifier, set it up, hook it up, a kind of hesitance kicks in …
"Gee, this equipment is 40 years old". Will it continue to be reliable? We are aware that
there is contemporary production of vacuum tube amplifiers out there, but these amplifiers
are very expensive. Thus, in praxis, they are exclusively destined for the audiophile circles.

And it is at this very point where the unique offering of Fezz Audio comes into play. A unique
vacuum tube sound, made available at a price point similar to a new, "transistor" based
device as sourced from a market.