Fetch TV Yes TV Quick Start Manual

Quick Start Guide

IMM01887 1418547 Optus TV Fetch Gen 3 Quick Start Guide 220x220mm v6.indd 1 29/01/2016 6:43 pm

1

Make sure you have
these items handy

What we’ve sent you:

What you should already have:

A. Yes TV by Fetch box

J. Broadband Modem or Router

B. Ethernet Cable (3m)

(You'll receive 3 of these if you’ve ordered
a Power Line Adaptor – 1 x 3m & 2 x 1.5m)

K. TV and TV Remote

I. Activation Code

(We’ve previously sent this
to you via SMS or Email)

E. HDMI Cable (1.8m) F. Power Supply (1. 5m) G. 2 x AAA Batteries

H. Yes TV Remote Control

C. Powerline Adaptors

(If you've ordered a pair)

Apps

Back
Text

Info

TV

Guide

Av

123

TV

Exit

Menu

R

IMM01887 1418547 Optus TV Fetch Gen 3 Quick Start Guide 220x220mm v6.indd 2-1 29/01/2016 6:43 pm

2 3

Your set-up checklist

INTERNETANTENNA POWERUSBHDMIOPTICAL

12V DC

(A)

(J)

(B)

To make sure you don’t get lost along the way, here’s
a checklist of the 3 main connections you’ll need to
make while setting up:

1 Connect to your broadband modem

(via Ethernet cable or WiFi)

2 Connect to your TV antenna

3 Connect to your TV

Connecting to the internet

There are 3 different ways you can connect your
Yes TV box to the internet – that’s via Ethernet Cable
direct to your modem, using a pair of Power Line
Adaptors or WiFi. The best option for you depends
on the location of your broadband modem or router
in your home.

Top Tip: Using an Ethernet Cable or a pai r
of Power Line Adaptors will help you get the
most out of your connection.

Option 1

USING ETHERN ET CABLE

Recommended if your modem’s within 3 metres
of your TV.

1 Grab the Ethernet Cable (B) and plug one end

into the port labelled ‘INTERNE T’ on the back
of your Yes TV box (A).

2 Plug the other end into a spare port on the

back of your broadband modem or router (J).

Step 1

Option 2

POWERLINE ADAPTO RS (PLAs)

If your modem’s in a different room or more than
3 metres away from your TV.

What are Powerline Adaptors? They’re a pair of
devices that transmit high-speed data between two
power points in different parts of your home using
existing electrical wiring - super handy hey!

1 If you already have a pair of PLAs continue onto

Step 2 (below). If you need a pair of PLAs just give
us a call on 1300 760 013 and we can arrange to
send a pair out to you for a small cost.

2 Grab one of the PLAs (C) and plug it into the

power point nearest to your modem.

3 Using the Ethernet Cable (B), plug one end into the

port on that PLA and the other e nd into a free port
on the back of your broadband modem or router (J).

4 Grab the other PLA (C) and plug it into the power

point nearest to your TV (K) and Yes TV box (A).

5 Finally, plug one end of the second Ethernet

Cable (B) into the PLA and the other end into
the port labelled ‘INTER NET’ on the back of your
Yes TV box (A).

Still need a hand? No problem.
Visit optus.com.au/yestv/plcinstall to download
our full PLA Setup Guide.

Option 3

WIFI

If you modem’s more than 3 metres away from your
TV and you have strong WiFi available.

If you’re going to connect using WiFi check out Step 6
of this guide after you’ve completed Steps 2, 3, 4 and

5. For now, continue onto Step 2.

INTERNETANTENNA P OWERUSBHDMIOPTICAL

12V DC

(A)

(J)

(B) (B)

THE ROOM WITH YOUR MODEM THE ROOM WITH YOUR YES TV BOX AND TV

(C) (C)

INTERNET DELIVERED

THROUGH YOUR POWER LINES

IMM01887 1418547 Optus TV Fetch Gen 3 Quick Start Guide 220x220mm v6.indd 2-3 29/01/2016 6:43 pm