Festo FDG-...-ZR-RF Series, FDG-25-ZR-RF, FDG-40-ZR-RF, FDG-63-ZR-RF Operating Instructions Manual

Driveless guide axis

FDG-...-ZR-RF

(en) Operating
instructions

8104202
2018-12a
[8104204]

FDG-...-ZR-RF

Translation of the original instructions

Identification of hazards and instructions on how to prevent them:

Danger

Immediate dangers which can lead to death or serious injuries

Warning

Hazards that can cause death or serious injuries

Caution

Hazards that can cause minor injuries

Other symbols:

Note

Material damage or loss of function

Recommendations, tips, references to other documentation

Essential or useful accessories

Information on environmentally sound usage

Text designations:
 Activities that may be carried out in any order

1. Activities that should be carried out in the order stated
– General lists
è Result of an action/References to more detailed information

2

Festo FDG-...-ZR-RF 2018-12a

FDG-...-ZR-RF

For all available product documentation è www.festo.com/pk

Passive guide axis type FDG-...-ZR-RF English

1 Operating parts and connections

1234

1

Internal thread for fastening the axis

2 Lubrication nipple

3 Centring recesses with or without fastening thread

5

6

7

4 Groove for fastening the work load

5 Slot for inserting the sliding blocks (only size 25)

6 Internal thread for fastening a switching lug

7 Groove for fastening the sensor supports

Fig. 1

Festo FDG-...-ZR-RF 2018-12a English

3

FDG-...-ZR-RF

2 Function

The slides of the guide axis support a load whilst moving.

When the load is shifted along the direction of the axis, the slide follows very
smoothly.

An extended slide enables a loading with higher torques.

8

Fig. 2: Basic representation

8 Bridge (transverse connection kit)

3 Application

The FDG-...-ZR-RF has been designed as a basic structure for boom or portal
systems consisting of a driving linear axis and a passive guide axis.

4

Festo FDG-...-ZR-RF 2018-12a English

FDG-...-ZR-RF

4 Conditions of use

Please note

S Make sure that the specifications in this chapter are always observed.

The product will then function correctly and reliably.

S Compare the maximum values specified in these operating instructions with

your actual application (e.g. forces, masses, temperatures, torques).
Only if the loading limits are observed can the product be operated in

accordance with the relevant safety guidelines.

S Take into account the ambient conditions

at the location.
Corrosive environments will impair the

service life of the product.

S Remove the packing from the product.

The packing is intended for recycling

(except for: oiled paper which must be
disposed of).

S Observe the specifications applicable to your location, as well as all local and

national laws and regulations.

S Use the product in its original state without undertaking any modifications.

S Make sure that safety measures cannot be ignored.

5 Transport and storage

[°C] [%] [mbar]

Fig. 3

S Consider the weight of the FDG-...-ZR-RF.

It weighs up to 100 kg.

S If necessary fasten the slide, which runs

very smoothly, with adhesive tape.

Festo FDG-...-ZR-RF 2018-12a English

Fig. 4

5