Fervi T063 Operation And Maintenance Mannual

OPERATION AND

fervi.com

MAINTENANCE MANUAL

High accuracy digital multimeter

temperature meter with holster

Art. T063

ORIGINAL INSTRUCTIONS

MEAS

URING

INSTRUMENTS

fervi.com

FOREWORD

Read this manual before any operation

ORIGINAL INSTRUCTIONS

Before starting any operation it is compulsory to read this instruction manual. The guarantee
of smooth operation and full performance of the instrument is highly dependent on the
application of all the instructions contained in this manual.

Operator Qualification

The workers responsible for using this tool must have all the necessary information,
education and receive adequate training regarding safety, including:
a) The conditions of use of the equipment;
b) Foreseeable abnormal situations, pursuant to Article 73 of Legislative Decree
81/08.

We guarantee the instrument complies with the specifications and technical

instructions described in the Manual on the date of its issuance (shown in this page).

On the other hand, the instrument may also be subject to important technical changes

in the future, without the manual being updated.

Therefore, see FERVI for information about modifications that could be implemented.

REV. 3 December 2013

Page 2 of 14

MEASURING

INSTRUMENTS

fervi.com

CONTENTS

1 INTRODUCTION ........................................................................................4

2 SPECIFICATIONS ......................................................................................5

2.1 General Characteristics .................................................................................................5

2.2 Technical Specifications ................................................................................................6

2.2.1 Voltage DCV .............................................................................................................. 6

2.2.2 Voltage ACV .............................................................................................................. 6

2.2.3 Direct current DCA ..................................................................................................... 6

2.2.4 Alternating current ACA .............................................................................................. 7

2.2.5 Resistance ................................................................................................................ 7

2.2.6 Capacity ...................................................................................................................7

2.2.7 Inductance (L)........................................................................................................... 8

2.2.8 Temperature (with probe supplied) .............................................................................. 8

2.2.9 Frequency ................................................................................................................. 8

2.2.10 Diode and continuity tests........................................................................................... 8

2.2.11 hFE transistor test...................................................................................................... 8

3 USING THE MULTIMETER ..........................................................................9

3.1 Preliminary notes..........................................................................................................9

3.2 Description of the instrument panel..............................................................................9

3.3 Measuring DCV and ACV voltage ................................................................................. 10

3.4 Measurement of DCA and ACA current ........................................................................10

3.5 Measuring resistors..................................................................................................... 11

3.6 Measuring capacitors .................................................................................................. 11

3.7 Measuring inductance ................................................................................................. 11

3.8 Measuring frequency................................................................................................... 12

3.9 Measuring temperature...............................................................................................12

3.10 Diode tests...............................................................................................................12

3.11 Transistor tests........................................................................................................ 13

4 REPLACING THE BATTERY AND THE FUSES ............................................. 14

Page 3 of 14

MEAS

URING

INSTRUMENTS

fervi.com

1 INTRODUCTION

This is a compact instrument, easy to handle, powered with a 9V battery, with a 65x42mm
backlit LCD screen, designed for use by electrical and electronic engineers, electricians,
students, hobbyists, who require an instrument that is: accurate, reliable and ready for use.

Using the instrument, it is possible to measure: Voltage (AC/DC), Current (AC/DC),
resistance, capacitance, inductance, temperature, frequency, diode and triode checks and
continuity tests and also the instrument is equipped with a button for instant AC/DC
conversion.

BEFORE USING THIS DIGITAL MULTIMETER, CAREFULLY READ THIS MANUAL THAT
DESCRIBES THE VARIOUS USES.

Page 4 of 14

MEASURING

INSTRUMENTS

fervi.com

2 SPECIFICATIONS

2.1 General Characteristics

 65x42mm backlit LCD screen with maximum reading of 1999.
 Numbers measuring 27 mm
 Switch with 30 positions for selecting functions (FUNCTION) and ranges (RANGE) that

allows easy and quick operations to be performed.

 Quick AC/DC conversion button
 Soft casing.
 Measurement update every 2-3 seconds.
 Out of range indication: “1” / OL
 Low battery indication: “ ”
 Auto power off 15 minutes after switching on. After this occurs, press the power button to

be able to re-use the instrument.

 Power supply: 9V battery
 Operating temperature 0°÷40°C.
 Maximum humidity when operating and during storage 80%
 Dimensions: 190x93.5x37mm.
 Weight: Approximately 448g (including the battery).
 Accessories:

o Instruction manual
o Couple of probes
o 9V battery
o Probe for the temperature control.
o Spare fuse

Page 5 of 14