Fervi MD01 Operation And Maintenance Manual
fervi.com
OPERATION AND
MAINTENANCE MANUAL
Metal detector
Art. MD01
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
STRUMENTI DI
MISURA
Pagina 2 di 14
Tutti i diritti di riproduzione e divulgazione del presente Manuale Tecnico e della documentazione citata e/o allegata, sono riservati. E' fatto espresso divieto di riprodurre, pubblicare o distribuire informazioni tratte dal presente Manuale. Copyright by FERVI
Read this manual before operating any machinery
ORIGINAL INSTRUCTIONS
Before starting any operation it is compulsory to read this instruction manual. The guarantee
of smooth operation and full performance of the instrument is highly dependent on the
application of all the instructions contained in this manual.
Operator Qualification
The workers responsible for using this device must have all the necessary information,
education and receive adequate training regarding safety, including:
a) The conditions of use of the equipment;
b) Foreseeable abnormal situations, pursuant to Article 73 of Legislative Decree
81/08.
We guarantee the instrument complies with the specifications and technical
instructions described in the Manual on the date of its issuance (shown in this page).
On the other hand, the instrument may also be subject to important technical changes
in the future, without the manual being updated.
Therefore, see FERVI for information about modifications that could be implemented.
REV. 1
March 2014
fervi.com
FOREWORD
STRUMENTI DI
MISURA
Pagina 3 di 14
Tutti i diritti di riproduzione e divulgazione del presente Manuale Tecnico e della documentazione citata e/o allegata, sono riservati. E' fatto espresso divieto di riprodurre, pubblicare o distribuire informazioni tratte dal presente Manuale. Copyright by FERVI
fervi.com
CONTENTS
1 INTRODUCTION ........................................................................................ 4
1.1 General safety information ........................................................................................... 4
2 DESCRIPTION AND CHARACTERISTICS .................................................... 5
3 TECHNICAL SPECIFICATIONS ................................................................... 7
4 ASSEMBLY ................................................................................................. 7
4.1 Installing the battery .................................................................................................... 8
4.2 Using headphones ......................................................................................................... 8
5 HOW TO USE ............................................................................................. 9
5.1 Switching on the instrument ......................................................................................... 9
5.2 Resetting the instrument .............................................................................................. 9
5.3 Testing and use of the instrument ................................................................................ 9
5.3.1 Testing inside buildings. .............................................................................................. 9
5.3.2 Testing and outdoor use ........................................................................................... 10
5.4 Operating tips ............................................................................................................. 10
6 TUNING OF THE INSTRUMENT ................................................................ 11
6.1 False positives ............................................................................................................ 12
7 LOCATING THE OBJECT ........................................................................... 13
8 FREQUENT PROBLEMS ............................................................................. 14
9 CARE AND MAINTENANCE ....................................................................... 14
STRUMENTI DI
MISURA
Pagina 4 di 14
Tutti i diritti di riproduzione e divulgazione del presente Manuale Tecnico e della documentazione citata e/o allegata, sono riservati. E' fatto espresso divieto di riprodurre, pubblicare o distribuire informazioni tratte dal presente Manuale. Copyright by FERVI
fervi.com
1 INTRODUCTION
Using this metal detector, it is possible to hunt for coins, relics and jewellery made of ferrous
and non-ferrous metals. The use of this instrument is suitable for any type of person and
requires no special skills or qualifications. The instrument is very versatile and easy to use.
1.1 General safety information
Protect the instrument from bumps or falls. Use extreme caution when handling the
instrument.
Protect the instrument from extreme temperatures and dust. Store the instrument in a
clean, dry place.
When the instrument is not being used for a long period of time it is necessary to
remove the batteries to prevent damage from the leakage of corrosive substances.
Use the device only for the purpose for which it was designed.
Always observe local regulations in force.
STRUMENTI DI
MISURA
Pagina 5 di 14
Tutti i diritti di riproduzione e divulgazione del presente Manuale Tecnico e della documentazione citata e/o allegata, sono riservati. E' fatto espresso divieto di riprodurre, pubblicare o distribuire informazioni tratte dal presente Manuale. Copyright by FERVI
1
Armrest
4
Locking ring
2
Handle
5
Search coil
3
Control unit
1 2 3
4
5
fervi.com
2 DESCRIPTION AND CHARACTERISTICS
Figure 1 - Overview of the device
Loading...