Ferroli NEW ELITE C 24 E, NEW ELITE C 30 E, NEW ELITE F30 E, NEW ELITE F 24 E BROCHURE
Wall hung gas fired boilers with
micro-storage heater for indoor installation
NEW ELITE
FERROLI, in line with its position as a comfort multinational, one of the major players at a world level, permanently carries out research and trials on new products, so as to respond to the continuously evolving expectations
of the users and the market.
Exceptional comfort, avantgarde technology, elegant design, reliability, quality and absolute
safety: these the objectives that the FERROLI Research and Development department focused on when
designing the NEW ELITE.
Consequently, the NEW ELITE on one hand confirms FERROLI's solid experience and tradition in the heating
sector, while on the other brings advanced design concepts to fruition. Furthermore, it offers comfort and
functions combined with an original style, in line with the latest architectural trends: the attractive appearance
and the futuristic control panel mean that the appliances can be installed in any environment, even in those
where, as well as practicality, the user places emphasis on the aesthetics of the furnishing.
The NEW ELITE boilers therefore represent the top of the FERROLI range of traditional wall-hung applian-
ces, and are therefore especially designed for and dedicated to those who wish to stand out.
The FERROLI history and tradition in the heating sector, along with its quality, certified in compliance with the
UNI EN ISO 9001:2000 standards, for the user mean guarantees, quality and safety.
The NEW ELITE series features four models, all with automatic electronic ignition and instant production of
domestic hot water; two of the models have natural draught and open flues (C 24 E and C 30 E) and
two have forced draught and are room sealed (F 24 E and F 30 E); all the models are factory fitted for
operation on natural gas, or alternatively LPG.
Main advantages
2
MICRO-STORAGE
The boiler is fitted with
a micro-storage heater (3 litres)
on the DHW circuit,
virtually eliminating
the waiting time
for the delivery
of domestic hot water.
THE STRUCTURE
The entire structure
of the boiler and in particular
the support frame is made
from very thick metal plate,
making it particularly sturdy.
FILLING THE SYSTEM
The boiler is fitted with
a solenoid valve for filling
the central heating circuit.
MICROPROCESSORS
The boiler's electronic
board features two
microprocessors.
CONTROL PANEL
The boiler features
a newly-designed digital
control panel, with complete,
user-friendly display.
AUTOMATIC BYPASS
Standard.
WATER AND GAS CONNECTIONS
The water and gas fittings
are positioned so as to assist
the installation operations.
DUAL HEAT EXCHANGER
The boiler is fitted with
the highly efficient and
comprehensively tested
FERROLI dual copper
heat exchanger.
COMBUSTION CHAMBER
Insulated with ecological fibre.
Model F 30E
introduction
NEW ELITE
THE MICRO-STORAGE HEATER
So as to achieve maximum comfort in the DHW circuit, a 3-litre micro-storage hea-
ter, complete with self-regulating electric heater, is installed downstream of the dual
heat exchanger; the user can enable/disable this feature at any time. When the heater is on (COMFORT rather that ECO mode), the waiting times for the delivery
of domestic hot water at the desired temperature are reduced to the minimum, and practically eliminated.
THE D
UAL HEAT EXCHANGER
The NEW ELITE boilers are fitted with the highly efficient and comprehensively tested
FERROLI dual heat exchanger, made from finned and braze welded copper pipes,
and featuring an ecological aluminium-based enamel coating. This exchanger has for
the last two decades been a synonym of high efficiency - both in central heating and in DHW production - and constant performance over time.
THE MICROPROCESSORS
All of the NEW ELITE models feature two notoriously very fast and precise microprocessors: one supervises the management and control of the various functions of
the boiler, while the other controls the ignition (electronic), flame detection, the
attempts at automatic re-ignition if the flame is extinguished, as well as the definitive
lock out of the boiler (requiring manual reset).
TH
E FILLING SYSTEMS
The NEW ELITE boilers are fitted with a system filling device - solenoid valve - that
can be set for automatic or semiautomatic operation. The appliances are factory set
for semiautomatic mode, however the user can switch to automatic mode using the
special button on the control panel.
In addition, if the system needs to be filled to the required pressure (the recommended pressure is 1 bar), and the boiler is disconnected from the mains power supply, it
can be filled completely manually (this mode is recommended for the first filling).
Micro-storage heater
(cross-section)
L’elettrovalvola
per il riempimento
automatico/semiautomatico
Dual heat exchanger
Electronic board
with microprocessor
Micro-storage heater
3
strong points
NEW ELITE
Loading...