Ferris Industries Ddskav15, Ddskav23, Ddskav17 User Manual
22880
Revision 03
Rev. Date: 02/2005
TP 100-7056-02-WD-F
Ferris Industries
5375 North Main Street
Munnsville, NY 13409
800-933-6175
HydroWalk Series
Dual Drive Walk-Behind Mowers
Powerhead
Model Number
DDSKAV15
DDSKAV15CE
DDSKAV17
DDSKAV17CE
DDSKAV23
DDSKAV23CE
Mower Deck
Model Number
DDS48
DDS48R
DDS52
DDS52R
DDSH52
DDS61
DDSH61
OPERATOR’S
MANUAL
1
WARNING
Engine exhaust from this product contains
chemicals known, in certain quantities,to cause
cancer,birth defects, or other reproductive harm.
Safety Rules & Information................................2
Identification Tags ...............................................5
Safety Decals.......................................................6
Safety Interlock System......................................7
Features & Controls............................................8
Control Functions....................................................8
Safety Interlock System ..........................................9
Operating the Dual Drive Walk-Behind
General Operating Safety .....................................10
Checks Before Starting.........................................10
Starting the Engine ...............................................11
Stopping the Mower..............................................11
Driving the Mower.................................................11
Mowing..................................................................12
Pushing the Mower by Hand.................................12
Storage..................................................................13
Starting After Long Term Storage .........................13
Regular Maintenance
Maintenance Schedule .........................................14
Checking Tire Pressures.......................................14
Checking/Adding Fuel...........................................15
Fuel Filter..............................................................15
Oil & Filter Change ...............................................15
Check / Change Air FIlter .....................................15
Check Hydraulic Oil Level.....................................15
Lubrication ............................................................16
Battery Maintenance.............................................17
Checking Battery Fluid ......................................17
Cleaning the Battery and Cables.......................17
Servicing the Mower Blades .................................18
Troubleshooting, Adjustments & Service
Troubleshooting the Mower...................................19
Troubleshooting the Mower Deck..........................20
Mowing Height Adjustment ...................................21
Idler Pulley Height Adjustment (48” models) ........21
Deck Leveling Adjustment (DDSH models) ..........22
Mowing Height Adjustment (DDSH models).........23
Mower Belt Replacement......................................24
Mower Belt Replacement (DDSH models) ...........25
Transmission Drive Belt Replacement..................26
Transmission Neutral & Tracking Adjustments......27
Neutral Adjustment ............................................27
Tracking Adjustment...........................................27
Transmission Maintenance & Service...................28
Changing Oil & Filters .......................................28
PTO Clutch Adjustment ........................................29
Battery Service .....................................................30
Checking the Battery Voltage ............................30
Charging A Completely Discharged Battery......30
Jump Starting with
Auxiliary (Booster) Battery .............................30
Replacement Parts & Accessories..................32
Lawn Care & Mowing Information...............LC-1
International Symbols...................................LC-8
Technical Manuals.........................................LC-8
NOTE: In this manual, “left” and “right” are referred to as
seen from the operating position.
WARNING
You must read, understand and comply with all safety
and operating instructions in this manual before
attempting to set-up and operate your machine.
Failure to comply with all safety and operating
instructions can result in loss of machine control,
serious personal injury to you and / or bystanders,
and risk of equipment and property damage. The
triangle in the text signifies important cautions or
warnings which must be followed.
Table of Contents
2
TP 600-7124-03-UV-F
OPERATION
1. Never run an engine in an enclosed area.
2. Mow only in the daylight or with good artificial light,
keeping away from holes and hidden hazards.
3. Be sure all drives are in neutral and parking brake is
engaged before starting engine. Only start engine
from the operator’s position. Use seat belts if provided.
4. Be sure of your footing while using pedestrian controlled equipment, especially when backing up. Walk,
don’t run. Reduced footing could cause slipping.
5. Slow down and use extra care on hillsides. Be sure
to travel in the recommended direction on hillsides.
Turf conditions can affect the machines stability. Use
caution when operating near drop-offs.
6. Do not mow in reverse unless absolutely necessary.
Always look down and behind before and while traveling in reverse.
7. Be aware of the mower discharge direction and do
not point it at anyone. Do not operate the mower
without either the entire grass catcher or the deflector in place.
8. Slow down and use caution when making turns and
when changing directions on slopes.
9. Never raise deck with the blades running.
10. Never leave a running unit unattended. Always disengage the PTO, set parking brake, stop engine, and
remove keys before dismounting. Keep hands and
feet away from the cutting units.
11. Turn off the PTO switch to disengage the blades
when not mowing.
12. Never operate with guards not securely in place. Be
sure all interlocks are attached, adjusted properly
and functioning properly.
13. Never operate with the discharge deflector raised,
removed or altered, unless using a grass catcher.
14. Do not change the engine governor setting or overspeed the engine.
15. Stop on level ground, lower implements, disengage
drives, engage parking brake, shut off engine before
leaving the operator’s position for any reason including emptying the grass catchers or unclogging the
chute.
16. Stop equipment and inspect blades after striking
objects or abnormal vibration occurs. Make necessary repairs before resuming operations.
17. Keep hands and feet away from the cutting units.
18. Look behind and down before backing up to be sure
of a clear path.
19. Never carry passengers and keep pets and
bystanders away.
20. Do not operate the unit while under the influence of
alcohol or drugs.
21. Slow down and use caution when making turns and
crossing roads and sidewalks. Stop blades if not
mowing.
22. Use care when loading or unloading the machine
into a trailer or truck.
TRAINING
1. Read, understand, and follow all instructions in the
manual and on the unit before starting. If the operator(s) or mechanic(s) can not read English it is the
owner’s responsibility to explain this material to them.
2. Become familiar with the safe operation of the equipment, operator controls, and safety signs.
3. All operators and mechanics should be trained. The
owner is responsible for training the users.
4. Only allow responsible adults, who are familiar with
the instructions, to operate the unit.
5. Never let children or untrained people operate or
service the equipment. Local regulations may
restrict the age of the operator.
6. The owner/user can prevent and is responsible for
accidents or injuries occurring to themselves, other
people or property.
7. Data indicates that operators, age 60 years and
above, are involved in a large percentage of riding
mower-related injuries. These operators should evaluate their ability to operate the riding mower safely
enough to protect themselves and others from serious injury.
PREPARATION
1. Evaluate the terrain to determine what accessories
and attachments are needed to properly and safely
perform the job. Use only accessories and attachments approved by the manufacturer.
2. Wear appropriate clothing including safety shoes,
safety glasses and ear protection. Long hair, loose
clothing or jewelry may get tangled in moving parts.
3. Inspect the area where the equipment is to be used
and remove all objects such as rocks, toys and wire,
which can be thrown by the machine.
4. Use extra care when handling gasoline and other
fuels. They are flammable and vapors are explosive.
a) Use only an approved container.
b) Never remove fuel cap or add fuel with the engine
running. Allow engine to cool before refueling. Do
not smoke.
c) Never refuel or drain the machine indoors.
5. Check that operator’s presence controls, safety
switches and shields are attached and functioning
properly. Do not operate unless they are functioning
properly.
Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control
of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.
This mowing deck is capab
le of amputating hands and f
eet and throwing objects.
The triangle in text signifies important cautions or warnings which must be followed.
Safety Rules & Information
Safety Rules & Information
23. Use care when approaching blind corners, shrubs,
trees or other objects that may obscure vision.
24. To reduce fire hazard, keep unit free of grass, leaves
& excess oil. Do not stop or park over dry leaves,
grass or combustible materials.
25. The engine in this unit is not factory equipped with a
spark arrester. It is a violation of California Public
Resource Code Section 4442 to use or operate the
engine on or near any forest-covered, brush-covered,
or grass-covered land unless the exhaust system is
equipped with a spark arrester meeting any applicable local or state laws. Other states or federal area
may have similar laws.
26. OSHA regulations may require the use of hearing
protection when exposed to sound levels greater
than 85 dBA for an 8 hour time period.
SLOPE OPERATION
Slopes are a major factor related to loss-of-control and tipover accidents, which can result in severe injury or death.
All slopes require extra caution. If you cannot back up the
slope or if you feel uneasy on it, do not drive on it.
Do
1. Mow across slopes, not up and down.
2. Remove obstacles such as rocks, tree limbs, etc.
3. Watch for holes, ruts, or bumps. Uneven terrain
could overturn the unit. Tall grass can hide obstacles.
4. Use slow speed. Choose a slow speed so that you
will not have to stop or change speed while on the
slope.
5. Use extra care with grass catchers or other attachments. These can change the stability of the unit.
6. Keep all movement on the slopes slow and gradual.
Do not make sudden changes in speed or direction.
7. See your authorized dealer for recommendations of
available weights to improve stability.
Do Not
1. Avoid starting, stopping, or turning on a slope. If
tires lose traction (i.e. machine stops forward motion
on a slope), disengage the blade(s) (PTO) and drive
slow off the slope.
2. Do not turn on slopes unless necessary, and then,
turn slowly and gradually uphill, if possible. Never
mow down slopes.
3. Do not mow near drop-offs, ditches, or embankments. The operator could lose footing or balance or
mower could suddenly turn over if a wheel is over
the edge of a cliff or ditch, or if an edge caves in.
4. Do not mow on wet grass. Reduced footing or traction could cause sliding.
5. Do not try to stabilize the unit by putting your foot on
the ground. (ride-on units)
6. Do not mow excessively steep slopes.
7. Do not use grass catcher on steep slopes.
8. Do not mow slopes if you cannot back up them.
TOWED EQUIPMENT (RIDE-ON UNITS)
1. Tow only with a machine that has a hitch designed
for towing. Do not attach towed equipment except at
the hitch point.
2. Follow the manufacturer’s recommendations for
weight limit for towed equipment and towing on
slopes. See attaching a trailer under OPERATION.
3. Never allow children or others in or on towed equipment.
4. On slopes, the weight of the towed equipment may
cause loss of traction and loss of control.
5. Travel slowly and allow extra distance to stop.
6. Do not shift to neutral and coast down hill.
CHILDREN
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the
unit and the mowing activity. Never assume that children
will remain where you last saw them.
1. Keep children out of the mowing area and under the
watchful care of another responsible adult.
2. Be alert and turn unit off if children enter the area.
3. Before and during reverse operation, look behind and
down for small children.
4. Never carry children, even with the blade(s) off. They
may fall off and be seriously injured or interfere with
safe unit operation. Children who have been given
rides in the past may suddenly appear in the mowing
area for another ride and be run over or backed over
by the machine.
5. Never allow children to operate the unit.
6. Use extra care when approaching blind corners,
shrubs, trees, or other objects that may obscure
vision.
EMISSIONS
1. Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.
2. Look for the relevant Emissions Durability Period and
Air Index information on the engine emissions label.
CAUTION
This machine produces sound levels in
excess of 85 dBA at the operator’s ear and
can cause hearing loss though extended
periods of exposure.
Wear hearing protection when operating this
machine.
3
WARNING
Never operate on slopes greater than 17.6 percent
(10°) which is a rise of 3-1/2 feet (106 cm) vertically in
20 feet (607 cm) horizontally.
Select slow ground speed before driving onto slope.
Use extra caution when operating on slopes with rearmounted grass catchers.
Mow across the face of slopes, not up and down,use
caution when changing directions and DO NOT
START OR STOP ON SLOPE.
Safety Rules & Information
SERVICE AND MAINTENANCE
To av
oid per
sonal injury or property damage, use
extreme care in handling gasoline.
Gasoline is
extremely flammable and the vapors are explosive.
Safe Handling of Gasoline
1. Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
2. Use only approved gasoline containers.
3. Never remove the gas cap or add fuel with the
engine running. Allow the engine to cool before refueling.
4. Never fuel the machine indoors.
5. Never store the machine or fuel container where
there is an open flame, spark, or pilot light such as
near a water heater or other appliance.
6. Never fill containers inside a vehicle or on a truck
bed with a plastic bed liner. Always place containers
on the ground away from your vehicle before filling.
7. Remove gas-powered equipment from the truck or
trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a
portable container, rather than from a gasoline dispenser nozzle.
8. Keep nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is complete. Do not use a nozzle lock-open device.
9. If fuel is spilled on clothing, change clothing immediately.
10. Never over-fill the fuel tank. Replace gas cap and
tighten securely.
11. Use extra care in handling gasoline and other fuels.
They are flammable and vapors are explosive.
12. If fuel is spilled, do not attempt to start the engine
but move the machine away from the area of spillage
and avoid creating any source of ignition until fuel
vapors have dissipated.
13. Replace all fuel tank caps and fuel container caps
securely.
Maintenance and Storage
1. Always observe safe refueling and fuel handling
practices when refueling the unit after transportation
or storage.
2. Always follow the engine manual instructions for storage preparations before storing the unit for both
short and long term periods.
3. Always follow the engine manual instructions for
proper start-up procedures when returning the unit to
service.
4. Never store the machine or fuel container inside
where there is an open flame, such as in a water
heater. Allow unit to cool before storing.
5. Shut off fuel while storing or transporting. Do not
store fuel near flames or drain indoors.
6. Keep all hardware, especially blade attachment bolts,
tight and keep all parts in good working condition.
Replace all worn or damaged decals.
7. Never tamper with safety devices. Check their proper operation regularly.
8. Disengage drives, lower implement, set parking
brake, stop engine and remove key or disconnect
spark plug wire. Wait for all movement to stop before
adjusting, cleaning or repairing.
9. Clean grass and debris from cutting units, drives,
mufflers, and engine to prevent fires. Clean up oil or
fuel spillage.
10. Let engine cool before storing and do not store near
flame.
11. Stop and inspect the equipment if you strike an
object. Repair, if necessary, before restarting.
12. Park machine on level ground. Never allow untrained
personnel to service machine.
13. Use jack stands to support components when
required.
14. Carefully release pressure from components with
stored energy.
15. Disconnect battery or remove spark plug wire before
making any repairs. Disconnect the negative terminal first and the positive last. Reconnect positive first
and negative last.
16. Use care when checking blades. Wrap the blade(s)
or wear gloves, and use caution when servicing
them. Only replace blades. Never straighten or weld
them.
17. Keep hands and feet away from moving parts. If
possible, do not make adjustments with the engine
running.
18. Charge batteries in an open well ventilated area,
away from spark and flames. Unplug charger before
connecting or disconnecting from battery. Wear protective clothes and use insulated tools.
19. Grass catcher components are subject to wear, damage, and deterioration, which could expose moving
parts or allow objects to be thrown. Frequently
check components and replace with manufacturer’s
recommended parts, when necessary.
20. Check brake operation frequently. Adjust and service
as required.
21. Use only factory authorized replacement parts when
making repairs.
22. Always comply with factory specifications on all settings and adjustments.
23. Only authorized service locations should be utilized
for major service and repair requirements.
24. Never attempt to make major repairs on this unit
unless you have been properly trained. Improper
service procedures can result in hazardous operation, equipment damage and voiding of manufacturer’s warranty.
25. Units with hydraulic pumps, hoses, or motors:
WARNING: Hydraulic fluid escaping under pressure
may have sufficient force to penetrate skin and cause
serious injury. If foreign fluid is injected into the skin
it must be surgically removed within a few hours by a
doctor familiar with this form of injury or gangrene
may result. Keep body and hands away from pin
holes or nozzles that eject hydraulic fluid under high
pressure. Use paper or cardboard, and not hands, to
search for leaks. Make sure all hydraulic fluid connections are tight and all hydraulic hoses and lines
are in good condition before applying pressure to the
system. If leaks occur, have the unit serviced immediately by your authorized dealer.
26. WARNING: Stored energy device. Improper release
of springs can result in serious personal injury.
Springs should be removed by an authorized technician.
27. Models equipped with an engine radiator: WARNING:
Stored energy device. To prevent serious bodily
injury from hot coolant or steam blow-out, never
attempt to remove the radiator cap while the engine
is running. Stop the engine and wait until it is cool.
Even then, use extreme care when removing the
cap.
4
5
Identification Numbers
ENGINE REFERENCE DATA
Unit Model Number
PRODUCT REFERENCE DATA
Unit SERIAL Number
Dealer Name
Date Purchased
Engine Make
Engine Model
Mower Deck Model Number
Mower Deck SERIAL Number
6
GENERAL
This unit has been designed and manufactured to provide you with the safety and reliability you would expect
from an industry leader in outdoor power equipment
manufacturing.
Although reading this manual and the safety instructions
it contains will provide you with the necessary basic
knowledge to operate this equipment safely and effectively, we have placed several safety labels on the unit to
remind you of this important information while you are
operating your unit.
All DANGER, WARNING, CAUTION and instructional
messages on your rider and mower should be carefully
read and obeyed. Personal bodily injury can result when
these instructions are not followed. The information is for
your safety and it is important!
The safety decals below are on your rider and mower.
If any of these decals are lost or damaged, replace them
at once. See your local dealer for replacements.
These labels are easily applied and will act as a con-
stant visual reminder to you, and others who may use
the equipment, to follow the safety instructions necessary for safe, effective operation.
Safety Decals
7
Safety Interlock System
SAFETY INTERLOCK
SYSTEM
This unit is equipped with safety interlock switches.
These safety systems are present for your safety, do not
attempt to bypass safety switches, and never tamper
with safety devices. Check their operation regularly.
Operational SAFETY Checks
Test 1 — Engine should NOT crank if:
• PTO switch is engaged, OR
• Parking brake is not engaged, OR
• Motion control handle is not in the NEUTRAL position
Test 2 — Engine SHOULD crank if:
• PTO switch is NOT engaged, AND
• Parking brake is engaged, AND
• Motion control handle is in the NEUTRAL position
Test 3 — Engine should SHUTOFF if:
• Operator releases the operator presence handles
with PTO engaged, OR
• Operator releases the operator presence handles
with parking brake disengaged.
Test 4 — Blade Brake Check
Mower blades and mower drive belt should come to a
complete stop within seven seconds after electric PTO
switch is turned off (or operator releases the operator
presence handles). If mower drive belt does not stop
within seven seconds, see your dealer.
NOTE: Once the engine has stopped, PTO switch must
be turned off, parking brake must be engaged, and the
motion control handle must be returned to the NEUTRAL position in order to start the engine.
WARNING
If the unit does not pass a safety test, do not
operate it. See your authorized dealer. Under no
circumstance should you attempt to defeat the
purpose of the safety interlock system.
8
Features & Controls
CONTROL FUNCTIONS
The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing
require the combined use of several controls applied in specific sequences. To learn what combination and
sequence of controls to use for various tasks see the OPERATION section.
9
Features & Controls
Parking Brake Handle
The parking brake is applied by pushing DOWN on the
parking brake handle until it stops. To release the parking brake, pull UP on the handle until it locks over center.
PTO (Power Take Off) Switch
The PTO switch engages and disengages the mower.
Pull UP on the switch to engage, and push DOWN to
disengage.
Engine Kill/Operator Presence Handles
These handles are a major factor in the safety interlock
system of the mower. Both handles are tied together so
depressing one handle depresses both. The operator
must depress the handles in order to deactivate the
engine kill system. Handles must be depressed to disengage the parking brake and engage the PTO switch.
Throttle Control
The throttle controls engine speed. Move the throttle forward to increase engine speed and back to decrease
engine speed. Always operate at FULL throttle.
Choke
Close the choke for cold starting. Open the choke once
the engine starts. A warm engine may not require choking. Pull the knob UP to close the choke. Push to knob
DOWN to open the choke.
Neutral Return Pedal
The neutral return pedal provides a hands-free return to
neutral. This is used in conjunction with the Reverse
Speed Control Levers (B) to properly stop the machine.
See the Operating the Dual Drive Walk-Behind Mower
section for steering instructions.
Fuel Tank Cap
To remove the cap, turn counterclockwise.
Fuel Shut Off Valve (not shown)
The fuel shut off valve is located under the fuel tank.
Turning the handle until it is VERTICAL will allow fuel to
be supplied to the engine. Turning the handle until it is
HORIZONTAL shuts off the fuel supply to the engine.
10
Operation
GENERAL OPERATING SAFETY
Before first time operation:
• Be sure to read all information in the Safety and
Operation sections before attempting to operate this
tractor and mower.
• Become familiar with all of the controls and how to
stop the unit.
• Drive in an open area without mowing to become
accustomed to the unit.
CHECKS BEFORE STARTING
• Check that crankcase is filled to full mark on dipstick.
See the engine Operator’s Manual for instructions
and oil recommendations.
• Make sure all nuts, bolts, screws and pins are in
place and tight.
• Fill the fuel tank with fresh fuel. Refer to engine
manual for fuel recommendations.
WARNING
Before leaving the operator’s position for any
reason, engage the parking brake,disengage the
PTO, stop the engine and remove the key.
To reduce fire hazard, keep the engine, tractor and
mower free of grass, leaves and excess grease.
Do not stop or park tractor over dry leaves, grass
or combustible materials.
Gasoline is highly flammable and must be
handled with care. Never fill the tank when the
engine is still hot from recent operation. Do not
allow open flame, smoking or matches in the area.
Avoid over-filling and wipe up any spills.
Figure 2. Pre-start Checks
A. Crankcase Oil Fill
B. Fuel Tank Filler Neck
A
B
WARNING
If you do not understand how a specific control
functions, or have not yet thoroughly read the
FEATURES & CONTROLS section, do so now.
Do NOT attempt to operate the tractor without
first becoming familiar with the location and
function of ALL controls.
STARTING THE ENGINE
1. Engage the parking brake and make sure the PTO
switch is disengaged and the motion control lever is
in the NEUTRAL position.
2. Set the engine throttle control to FAST throttle position. Then fully close the choke by pulling the knob
OUT fully.
NOTE: A warm engine may not require choking.
3A.Insert the key into the ignition switch and turn it to
the RUN position (15hp & 17hp models). Firmly and
sharply pull the recoil until the engine starts.
3B.Insert the key into the ignition switch and turn it to
the START position (23hp model).
4. After the engine starts, gradually open the choke
(push knob down fully).
Warm up the engine by running it for at least a minute
before engaging the PTO switch or driving the mower.
5. After warming the engine, ALWAYS operate the
unit at FULL THROTTLEwhen mowing.
In the event of an emergency the engine can be
stopped by simply turning the ignition switch to
STOP. Use this method only in emergency situations.
For normal engine shut down follow the procedure given
in STOPPING THE MOWER
STOPPING THE MOWER
1. Gently squeeze both steering control levers evenly to
stop the machine.
3. Once the machine is stopped, firmly depress the
neutral return pedal to place the transmissions in
neutral.
2. Disengage the PTO by pushing down on the PTO
switch.
3. Engage the parking brake by pushing the handle forward until it stops.
4. Move the throttle control to mid-throttle position and
turn the ignition key to OFF Remove the key.
Operation
DRIVING THE MOWER
The hydrostatic transmission has an infinite number of
speeds between full speed forward and reverse, with the
faster speeds being achieved by moving the speed control lever and steering control levers farthest in the direction of travel.
TO MOVE FORWARD
1. Disengage the parking brake.
2. Gently move the speed control lever forward until
desired speed is achieved.
TO MOVE BACKWARD
1. Disengage the parking brake.
2. Gently squeeze both steering control levers evenly,
until desired speed is achieved.
TO SLOW OR STOP MACHINE
1. Gently squeeze both steering control levers evenly to
slow the machine.
2. Continuing to squeeze the steering control levers will
stop the machine.
3. Once the machine is stopped, firmly depress the
neutral return pedal to place the transmissions in
neutral.
TO TURN MACHINE
To make a left-hand turn:
Gently squeeze the left-hand steering control lever. A
sharp or gentle turn is determined by the amount of
force applied to the steering control lever.
To make a right-hand turn:
Gently squeeze the right-hand steering control lever. A
sharp or gentle turn is determined by the amount of
force applied to the steering control lever.
NOTE: ALWAYS REDUCE SPEED IN A TURN
For normal use, the throttle should be kept fully open
and the ground speed of the machine determined by the
speed control lever. When transporting the machine or
when loading or unloading from a truck or trailer, partial
throttle should be used to slow the reaction time of the
controls and reduce noise.
Practice maneuvering the machine at a slow engine
speed on level ground with the blade engagement switch
in the "OFF" position until you are familiar with the controls.
11
12
Operation
Figure 3. Hydraulic System By-Pass
A. Hydraulic Release Lever (right-hand side shown)
A
MOWING
Before mowing, set the cutting height as described in
the
Troubleshooting, Adjustments & Service
section.
1. Engage the parking brake. Make sure the PTO
switch is disengaged and the motion control lever is
in the NEUTRAL position.
2. Start the engine (see STARTING THE ENGINE).
3. Set the throttle to FULL.
4. Engage the PTO by pulling up on the PTO switch (E,
Figure 1).
5. Begin mowing. See
Lawn Care
section for tips on
mowing patterns, lawn care, and trouble shooting
information.
6. When finished, shut off the PTO.
7. Stop the engine (see STOPPING THE TRACTOR
AND ENGINE).
PUSHING THE MOWER BY HAND
1. Disengage the PTO, engage the parking brake, turn
the ignition OFF, and remove the key.
2. To disengage the transmissions (free-wheel position),
lift the hydraulic release levers (A, Figure 3) located
in front of the transmission fan screen. Lock into
position shown in Figure 3.
3. Disengage the parking brake.
The mower can now be pushed by hand.
4. After moving the mower, re-engage the transmissions (drive position) by unlocking the levers and
returning them to the down position. If the levers are
not completely down, a partial by-pass may potentially damage the transmissions.
DO NOT TOW MACHINE
Towing the machine will cause hydraulic
transaxle damage. Do not use another vehicle to push or pull this unit.
Loading...