Ferrari stereo User Manual

USEnglisch.bk : Griff.fm5 Seite 1 Freitag, Februar 1, 2002 10:33 AM

Operation Guide

Mode d’emploi

ENGLISH

FRANCAIS

USEnglisch.bk : Inhalt.fm5 Seite 2 Freitag, Februar 1, 2002 10:33 AM

Contents

Contents 2

Bottom Arrangements 4

Anti-theft Device 5

Code number entry 5 Remove portable panel 6 Inserting portable panel 6

General Operation 7

Switch on / off 7 Adjust volume 7 Mute function 7 Activate tone menu 7 Adjust bass 8 Adjust treble 8 Adjust balance 8 Fader 8 Loudness on /off 9 Linear adjustment 9 Adjust mono / stereo 9

Radio Operation 10

Select operating mode 10 Select waveband 10 Switch on radio menu mode 10 Setting procedures for station selection 11 FM, AM station search 11 Scan search 11 Direct frequency input 11 Program type display/search (PTY) 12

FM 1/FM 2 station - retrieve/store 12 AM station - retrieve/store 13 AM / FM autostore 13 Manual tuning 13 Traffic Program (TP) 14 Traffic program station - display / select 14 Announcement standby - switch on/off 14 Telephone mute function 15 Time request 15

Tape Operation 16

Cassettes - insert / eject 16 Track switching 16 Radio operation during forward / rewind 16 Fast forward / rewind 17 Music search - forwards / backwards 17 Dolby NR 17 Skip blank 18 Scan - search 18 Cleaning the cassette mechanism 18

USEnglisch.bk : Inhalt.fm5 Seite 3 Freitag, Februar 1, 2002 10:33 AM

CD/MD Changer Operation 19

Compact Disc (CD) instructions 19 Operational readiness of CD/MD changer 19 CD magazine - load / unload 20 Playing CD/MDs 20 Track skip - forwards / reverse 21 Scan search 21 Fast forward / rewind 21 Relative time, number of tracks, total playing time 22 Random play 22 Direct track selection 22

User Menu 23

User menu - request / quit 23 DRIVER setting 23 User memory 24 LED setting 24 GAL setting 24 Telephone mute characteristics (PHONE) 25 Viewing angle setting (ANGLE) 25 Country setting (COUNTRY) 26

Contents

Connection Instructions 27

General Instructions 28

RBDS system 28 PTY (Program Type) 28

Technical Data 29

USEnglisch.bk : TASTEN.fm Seite 4 Freitag, Februar 1, 2002 10:33 AM

Bottom Arrangements

1 Volume control 2 On / off switch ( ) 3 Tone button ( ) 4 Road traffic announcement button ( ) 5LED 6 Operating mode switching button ( M 7 Function button ( ) 8 Waveband switching button ( B

9 Tape eject button ( ) 10 Right rotary control 11 Multifunction buttons 12 Display

ode)

and)

USEnglisch.bk : DIEB.fm Seite 5 Freitag, Februar 1, 2002 10:33 AM

Code number entry

If the car radio is disconnected from the power supply, it is theft-protected upon reconnection. After switching on at the button, the prompt CODE, followed by 4 stars is displayed. The four-digit code must then be entered using the multifunction buttons “1-0”.

Example : Code number 1530 (the code number can be found on the enclosed

CODE CARD).

Enter code number using the multifunction buttons.

The first star is extinguished after entry of the first digit. The second star is extinguished after entry of the second digit, etc. The unit switches on automatically after entry of the 4th digit if this and all other digits have been correctly entered.

Note : It is essential that the CODE CARD be kept in a safe place outside

the vehicle. Thus, illegal use is not possible. The accompanying sticker should be attached to the inside of the vehicle windshield/ window.

Anti-theft Device

If an incorrect code number is entered, the prompt CODE with the four stars is displayed again. After entering incorrect code three times WAIT is displayed and the unit is disabled for approx. 60 minutes. Three further incorrect entries block the unit again for 60 minutes.

Note : The waiting time applies only to ignition and unit switched on.

USEnglisch.bk : DIEB.fm Seite 6 Freitag, Februar 1, 2002 10:33 AM

Anti-theft Device

Remove portable panel

As an effective anti-theft device, the portable panel (A) can be removed from the unit. For this purpose, press and hold button. The display folds forwards. The portable component can then be pulled out. The volume is limited to a maximum value after the display has been folded down. After 20 seconds an audible signal indicates that the control component is folded down. The unit is switched to mute. The unit switches off after a further 10 seconds.

Note : For safety reasons, it is not permissible to leave the portable panel

open when driving

Note : Please insert the portable panel in the accompanying protective

cover after removal. Do not touch the metal contacts on the portable panel or on the radio.

Inserting portable panel

Insert the portable panel so that it engages first in the lower left catch and then in the lower right. Then press the portable panel into the upper catches. Or position portable panel directly over all four catches and press in firmly to engage. For proper functioning, ensure that the portable panel is firmly engaged in all four catches.

If a new portable panel or one from another unit is utilised, the code number must be entered, as previously described, in order to activate the unit.

USEnglisch.bk : Allgemeine.fm Seite 7 Freitag, Februar 1, 2002 10:33 AM

Switch on / off

Press button. Further on / off switching possibilities: Via ignition. In order to switch on via the ignition, the unit must previously have been switched off via the ignition. After switching off the ignition, the unit can be prevented from switching off by pressing the button within 3 seconds.

Note : The unit can also be switched on with the ignition switched off via

the button, but will switch off automatically after 1 hour.

Adjust volume

Turn volume control to right / left. The volume is increased or decreased. The current volume level is shown on the display.

Mute function

The unit can be switched to mute in each operating mode by pressing the volume control. MUTE appears on the display. The mute function is cancelled by pressing the volume control, changing the operating mode, changing the waveband or inserting a tape/CD.

General Operation

Activate tone menu

Press button. The tone menu is activated. The following functions can be called up: BASS (Bass), TREB (Treble), BAL (Balance), FAD (Fader), LOUD (Loudness) and STEREO (Reception optimization). Bass and treble settings for the AM/FM wavebands, for road traffic announcements and tape/CD operation are stored separately (values from -7 to +7). The settings for fader, balance and loudness (no loudness with AM) are stored together for all operating modes (values from -7 to +7).

USEnglisch.bk : Allgemeine.fm Seite 8 Freitag, Februar 1, 2002 10:33 AM

General Operation

Adjust bass

Press button and then multifunction button “-” or “+”. BASS and the set value are displayed. Set the desired bass via both buttons.

Center setting: Press both buttons simultaneously.

Adjust treble

Press button and then multifunction button “-” or “+”. TREB and the set value are displayed. Set the desired treble via both buttons.

Center setting: Press both buttons simultaneously.

Adjust balance

Press button and then multifunction button “ ” or “ ”. BAL and the set value are displayed. Set the desired balance via both buttons.

Center setting: Press both buttons simultaneously.

Fader

Press button and then multifunction button “ ” or “ ”. FAD and the set value are displayed. Set the desired fade level via both buttons.

Center setting: Press both buttons simultaneously.

USEnglisch.bk : Allgemeine.fm Seite 9 Freitag, Februar 1, 2002 10:33 AM

Loudness on /off

Press button and then multifunction button “LD”. LOUD ON or LOUD OFF are displayed. The loudness can be switched on or off alternately by

pressing the multifunction button.

Linear adjustment

Activate tone menu. Then again press and hold button for more than 2 seconds. The tone values for the set signal source (e.g. radio/FM) are set to an average value FM LINEAR. Press and hold button for more than 4 seconds. All tone values for the signal sources radio and tape / CD are set to an average value ALL LINEAR.

Adjust mono / stereo

Three different reception optimisation settings can be set in order to suppress reception dependent interference and reflections. Repeatedly press multifunction button “ST” in tone menu until the desired optimisation is set.

General Operation

AUTO: Setting for normal operation - i.e., the unit switches from stereo to mono and back depending upon reception location (provides the optimum setting for almost all reception areas). STEREO: Setting for unusal reception situations - i.e. the unit is set permanently to stereo (e.g. for private radio stations in city areas) MONO: Setting for reception conditions in which reflections constantly occur

- i.e., the unit is set constantly to mono.

The setting is effective immediately after pressing the multifunction button “ST” and is also retained on switching off.

+ 20 hidden pages