Ferm FEAS-18K2, FEAS-1440 User Manual

Ferm BV • P.O. Box 30159 • 8003 CD Zwolle • The Netherlands • www.ferm.com 0412-08

UK Subject to change
D Änderungen vorbehalten

www.ferm.com

UK

D

USERS MANUAL 03

GEBRAUCHSANWEISUNG 07

Art.nr. CDM1045

FEAS-18K2

Ferm 15

2 Ferm

Fig. A

Fig. B

Fig. C

Fig. D

Fig. E

3

4

6

1

5

14 Ferm

CORDLESS DRILL

THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2

TECHNICAL DATA

PRODUCT INFORMATION

Fig. A

1 On/off switch
3 Torque setting ring
4 Chuck
5 Battery
6 Direction switch

CONTENTS OF CARRYING CASE

The carrying case contains:
1 Cordless drill
2 FEASB-18 batteries
1 FEASL-18 battery charger
13 Accessories
1 Operating instructions
1 Warranty card

Check the appliance, any loose parts and accessories for
damage caused during transport.

SAFETY INSTRUCTIONS

When using electric machines always observe the safety
regulations applicable in your country to reduce the risk
of fire, electric shock and personal injury. Read the
following safety instructions and also the enclosed safety
instructions.
Keep these instructions in a safe place!

1. Keep work area clear.

Cluttered areas and benches invite injuries.

2. Consider work area environment.

Do not expose power tools to rain. Do not use power
tools in damp or wet locations. Keep work area well lit.
Do not use power tools in presence of flammable liquids
or gases.

3. Guard against electric shock.

Prevent body contact with grounded surfaces (e.g. pipes,
radiators, refrigerators).

4. Keep visitors away.

Visitors should be kept away from the work area at all
times. Do not let visitors handle the Electric Rotary
Hammer Drill at any time.

5. Store unused tools.

When not is use keep tools out of reach of children. Store
in a dry and secure location.

6. Do not force tool.

Do not apply undue pressure as this may affect
performance and may cause damage to the machine.
Forcing the job also increases the potential for accidents.

7. Use right tool.

Do not force small tools or attachments to do the job of
heavy duty tool. Do not use a tool for purposes not
intended.

8. Dress properly.

Do not wear loose clothing or Jewellery. They can be
caught in moving parts. Rubber gloves and nonskid
footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.

9. Use safety glasses.

Also use face or dust mask when operation is dusty.

10. Connect dust extraction equipment

If devices are provided for the connection of dust
extraction and collection facilities ensure these are
connected and properly used.

11. Do not abuse cord.

Never carry tool by cord or yank it to disconnect it from
electrical socket. Keep cord from heat, oil and sharp
edges.

12. Secure work.

Use clamps or a vice to hold work. It’s safer than using
your hand and it frees both hands to operate tool.

13. Do not overreach.

Keep proper footing and balance at all times.

14. Maintain tools with care.

Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodically and,
if damaged, have repaired by authorized service facility.
Inspect extension cords periodically and replace if
damaged. Keep handles dry, clean and free from oil and
grease.

15. Disconnect tools.

When not in use, before servicing and when changing
accessories such as blades, bits and cutters.

Voltage | 18 V

—

--­Charger voltage | 230 V
Charger frequency | 50 Hz
Battery output | 1.2 Ah
Charging time | 3 - 5 hour
Drill speeds | 1
Max. torque (low speed) | 12 Nm
No-load speed | 0-900/min
Chuck capacity | 0.8-10 mm
Weight (incl. battery) | 1.56 kg
Lpa (sound pressure) | < 75 dB(A)
Vibration | < 2.5 m/s

2

Ferm 3