FENDA TECHNOLOGY IMW885 User Manual

Item # IMW 855

Owner’s Manual

Introduction

Thank you for purchasing the Altec Lansing IMW855 XLSOUNDBLADE Portable Bluetooth Speaker. You can
use this speaker to listen to audio wirelessly from devices such as smart phones, computers, iPods, tablets
and most other Bluetooth sound sources. Please read this manual carefully FIRST in order to get the most out
of your speaker.

Important Safety Precautions

When using your speaker basic safety precautions should always be followed, including the following:

1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER.

2. Never expose your speaker to high temperatures or undue moisture or humidity.

3. In order to avoid the risk of electric shock, never attempt to open your speaker or repair it without the
assistance of certified professionals.

4. If your speaker is exposed to water, please power it off immediately.

5. If you do not intend on using your speaker for an extended period of time, please unplug the AC power
adapter from the power outlet and also disconnect it from your speaker.

Features

-Seamlessly stream music from your iPad, iPhone, Android device, laptop, tablet or other Bluetooth enabled

device.

-Class-D digital amplifier offers high energy efficiency and superior sound.

-Supports Bluetooth protocol V

-AUX IN port allows you to connect additional audio sources using the included 3.5mm Auxiliary Cable.

-Charge Smartphones or tablets by connecting them to the built in 5V USB port.

2.1+EDR and A2DP1.2 audio streaming profile.

Package Contents

1. IMW855 XLSOUNDBLADE Portable Bluetooth Speaker

2. AC Adapter

3. 3.5mm Auxiliary Cable

4. Owner’s Manual with Warranty Information

Technical Specifications

Speaker Units: 2”*2
Input: 100V-240V~50/60Hz
Output: 9V 2A
Dimensions: W 338 × D 80 × H 103mm

A Quick Look at Your Device
Charging Your Speaker

1. Connect one end of the included AC adapter to the DC IN jack on your speaker. Then plug the other end of

the AC adapter into a suitable power outlet. The red POWER light on your speaker will flash slowly to indicate
the internal battery is being charged. You can also use your speaker to steam music while it is charging.

NOTE: The internal battery of your speaker takes approximately four hours to charge when completely
drained. It can last up to seven hours before needing to be recharged.

Understanding the LED Status Indicators

Bluetooth PAIR Indicator Light

Blinking Blue LED = Bluetooth not connected. (Ready to pair.)
Solid Blue LED = Bluetooth connected.

POWER Indicator Light

Solid Red LED (speaker connected to AC adapter) =Battery Fully Charged
Red LED Blinking Slowly (speaker connected to AC adapter) = Battery Charging
Solid Red LED (speaker not connected to AC adapter)=Battery Ready for Use
Red LED Blinking Rapidly (speaker not connected to AC adapter) = Battery Power Low