FENDA TECHNOLOGY B530R, B530L User Manual
B530-R
B530
TWS Earphone
USER GUIDE (EN)
06/03/19 V01
PACKAGE LIST
Wireless Earbud * 2
Magnetic Charging Case *1
USB Charging Cable * 1
Ear tips * 3 pairs
User manual *1
Gift Box * 1
IMPORTANT NOTES
Before using B530 wireless earbuds, please charge both case and earbuds;
While you are trying to connect the earbuds to a new device, make sure the
earbuds are not connected with any other devices;
We provide 3 pairs of ear tips (include one pair installed on the earbuds), please
select the best one for different occasions;
A Key to sound quality in any earbud is the FIT of rubber ear tips to the listener. If
you don't have a snug fit, you could lose up to 30-75% of the sound quality;
If the earbuds cut in and out frequently in routine use, it should be a defective item.
Feel free to contact us. We would help to solve your issue within 8 hours normally.
How to contact us?
(Don’ t forget to provide your order number while contacting us):
us@tranya.com (US, CA, MX)
eur@tranya.com (Europe)
jp@tranya.com (Japan)
support@tranya.com (other markets)
Our website (www.tranya.com) and Facebook(Tranya) are available now, and you
can get the help quickly and some discounts of new products if you
SUBSCRIBE/FOLLOW/LIKE us.
1
English English English English English English English English English English English
CONNECT SETTINGS FOR STEREO MODE
Stereo Mode (Dual Mode: The left and right earbuds are as a whole item.)
Follow the tips to connect your earbuds:
Step 1: Power on
The earbuds will power on
AUTOMATICALLY when you remove
the earbuds from the charging case with
a voice prompt of “POWER ON“.
Or you can also press the power keys on
both earbuds up to 3 seconds to turn
them on manually.
3s
Step 2: Pairing
When both earbuds are on, the left
and right earbuds will connect with
each other AUTOMATICALLY with a
voice prompt of “DU” from each
earbud.
Once two earbuds are connected, the
right earbud (master device) will enter
the pairing mode AUTOMATICALLY
with a voice prompt of “PAIRING”.
Step 3: Connected
Search and select “B530-R” on your
smart phone to finish your settings,
with a voice prompt of
“CONNECTED” from the right
earbud.
Step 4: Power off
Return to the charging case or press
the power key on either one of the
earbuds up to 5 seconds to turn off
the earbuds.
R
(master device)
RL (master device)
B530-R
5s
CONNECT SETTINGS FOR MONO MODE
(Single Mode: The left or right earbud is as a separate item.)
Mono Mode
Follow the tips to connect only the LEFT earbud:
Note: Make sure that the right earbud keeps off throughout the whole process.
Step 1: Power off firstly
Press the power key on the left earbud
up to 5 seconds to turn it off if it is on
when you start setting.
Step 2: Power on and Pairing
Press the power key on the left earbud
up to 5 seconds to power on and enter
pairing mode with voice prompt of
"POWER ON" and "PAIRING" within
20 seconds. (Don't take your finger
away until you hear "PAIRING". )
L
5s
20s
5s
L
pairing
mode
Step 3: Connected
Search and select “B530-L” on your
smart phone to finish your settings, with
a voice prompt of “CONNECTED” from
the left earbud.
L
(master device)
B530-L
Step 4: Power off
Return the left earbud to the charging
case or press the power key up to
5 seconds to turn it off.
L
Note: The above steps are also applicable to the right earbud.
ATTENTION:
If you want to switch to Stereo Mode, either way would be helpful below:
(1) Clear “B530-L” on the Bluetooth list of your smartphone;
(2) Turn on the RIGHT earbud first, then the LEFT earbud subsequently.
If the above ways don’t work, switch to the “FAQ” about “How to back to stereo
mode”.
CONTROLS
AUDIO PLAYING
Press Play / pause
X1
Press and hold the power key of the right earbud up to 2 seconds
2s
2s
Press and hold the power key of the left earbud up to 2 seconds
Double press the right earbud Volume+
5s
X2
Double press the left earbud Volume -
X2
Note: Above Volume control is available for Mono Mode.
Next track
Previous Track
CALLING
Short Press Answer / End call
X1
Press and hold for 2 second Reject call
2s
Triple click the power key on either one of the earbuds
X3
Note: Please make sure your mobile device supports this function.
CHARGING
(1) Charging the Earbuds:
The earbuds will be charged
automatically when you return them to
the charging case.
(2) Charging the Case:
Use 5V adapter (not included) to charge
the case.The white LED indicators are
blinking while charging. All of them will
keep on when fully charged.
VOICE ASSISTANT
Activate Siri / other
voice control software
Earbud status indicator
Steady red Charging
Off Fully charged
Note: Charge the charging case before first
use of earbuds. Place the earbuds in the
charging case before you start charging.
Clean the charging pin on regular basis to
prevent poor connection.
99
100
(3) Battery LED Indicator:
Trigger this function by the following action:
Put the earbud back into the case.
The four LED indicators correspond to different
battery levels:
100%
RESET
Reset your earbuds if you can’t go back to the stereo mode or if you can only hear
sound on either side:
Step 1: Clear up“B530-L” and “B530-R”
on the Bluetooth list of your cell phones,
then turn off the Bluetooth in your cell phones;
Step 2: Pick up both the left and right
earbuds and long press the power keys up
to 5 seconds to turn off the earbuds;
Step 3: Press and hold the power keys up
to 15 seconds until you hear the voice
prompt of “RESET” from BOTH earbuds;
Step 4: Put both earbuds into the charging
case and wait 10 seconds.
Step 5: Turn on both earbuds and keep
the two earbuds "within 5 cm" during the
whole process (the most important key
to back to stereo mode);
Step 6: Turn on the Bluetooth of your
smartphones, then select the "B530-R"
to pair with your smartphone, it would be
RESET successfully. (If both B530-R and
B530-L show in the Bluetooth list at the
same time, please do not connect but
repeat step 4- step 6, until only B530-R
shows in Bluetooth list of your smartphone).
1
3
5
A
6
Reset
Turn on
B530-L
15s
R
2
Turn off
4
B
B530-R
<5cm
3s
5s
10s
10 English
FAQ
Q: How to back to stereo mode after faulty operation?
A:
Either way would be helpful below:
(1) Clear “B530-L” on the Bluetooth list of your smartphone;
(2) Turn on the RIGHT earbud first, then the LEFT earbud subsequently. Make sure
that do NOT select “B530-L” on your smart phone at any time if you want to go
back to stereo mode.
If you still can’t go back to stereo mode, try to reset the earbuds.
Q: Will there be latency when watching a video from your laptop or cell phone?
A: The following tips may be helpful.
(1) Video latency depends not only on the earbuds, but also the cell phones and the apps.
(2) Due to the Bluetooth 5.0 and high sensitivity antenna, the latency is hardly
noticed on IOS devices, such as iPhone and iPad series.
(3) For Android and Windows devices, the latency may be noticed in a few apps, but
they perform pretty well on YouTube.
Q: Why does signal interruption occur in someplaces, such as along railway,
in airport?
A: Generally, there are plenty of cables underlying in theplace mentioned above,
which are more likely to produce electromagnetic interference and result in
signal interruption.
If the earbuds cut in and out frequently in routine use, it should be a defective
item. Feel free to contact us. We would help to solve your issue within 8 hours
normally.
Q: Why can’t the earbuds power on/off automatically?
A: If the battery of charging case is low, the earbuds can NOT power on/off
automatically. Please charge the case and try it again.
11 122 3 5 6 7 8 94
SPECIFICATIONS
Bluetooth Version: 5.0
Range: 10M
Water Proof: IPX5
Battery Capacity:
Playing Time: 6-8 hours
Charging Time: 2 hours
Voice Assistant: Siri
Support: iPhone/iPad/Huawei Battery Indication
4pt font is not achievable on B530 due to product dimensions.
FCC IDs and MICs are printed in charging case.
55mAh (each earbuds)
800mAh (charging case)
FCC Compliance Statement
1. This device complies with Part 15 of
the FCC rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
2. Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the equipment.
FCC Interference Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Disposal
The Waste Electrical and
Electronic Equipment (WEEE)
Directive aims to minimize the
impact of electrical and
electronic goods on the environment,
by increasing re-use and recycling and
by reducing the amount of WEEE going
to landfill. The symbol on this product
or its packaging signifies that this
product must be disposed separately
from ordinary household wastes at its
end of life. Be aware that this is your
responsibility to dispose of electronic
equipment at recycling centers in order
to conserve natural resources. Each
country should have its collection
centers for electrical and electronic
equipment recycling. For information
about your recycling drop off area,
please contact your related electrical
and electronic equipment waste
management authority, your local city
office, or your household waste
disposal service.
Battery Disposal
Do not dispose of used
batteries with your household
waste. Take them to an
appropriate disposal/collection site.
support@tranya.com
Loading...