Femco B7410, B7610, B7800, B7510, B2410 Owner's Manual

INSTRUCTIONS

WEATHERBRAKE

2185

FITS

Kubota: B7410, B7510, B7610, B7800,

B2410, B2710, B2910

General Offices

1132 W. 1ST STREET
M

cPherson, KS 67460
Phone: [phone]
Web: www.femcomfg.com

Form No. 286331300 / 09-2007

IMPORTANT

CAREFULLY STUDY THE PHOTO DIAGRAMS SHOWING THE

LOCATION OF EACH PART. LEAVE ALL HARDWARE LOOSE

UNTIL INSTRUCTED TO TIGHTEN.

YOKE BRACKET

1. Remove bolt from center of dash cowl.

A

DOOR POST

1. Remove plastic plug from floor mat and drill hole out
to 9/32” diameter

2. Attach door post (A) using one 1/4” x 3/4” bolt and
nut.

2. Attach yoke bracket (A) using one 8mm bolt.

3. Tighten Bolts.

A

A

MOTOR COVER

1. Arrange motor cover over hood of tractor.

2. Slide 3” hem of motor cover down over top of door
post.

PEDAL GUARD

1. Remove plastic plug from floor mat and drill hole out
to 9/32” diameter.

2. Attach pedal guard (A) using one 1/4” x 3/4” bolt and
nut.

A

A

YOKE

1. Insert yoke into top 3” of motor cover.

2. Attach yoke to yoke bracket using two 1/4” x 3/4”
bolts and nuts.

3. Attach yoke to door post using one 1/4” x 1” bolt and
nut. Note: head of bolt inside, nut outside.