Fema Electronica Series MAG-35, MAG-35-36 User Manual

FEMA ELECTRÓNICA - Page 1

Panel meters for PROCESS signals in Vdc

FEMA ELECTRÓNICA

STANDARD

PANEL

METERS

USER’S MANUAL

(HT9693-r011206)

Series MAG-35

IDEAL SOLUTION to display process signals in 0/10 Vdc and similar up to
200Vdc, with display scaled in engineering units. Provides excitation
voltage output to power-up transducers. Available options for relay output,
analogue output, serial outputs and others. Multiple input signal ranges
selectable by internal jumpers.

MAG-35-36 for process 0/10 Vdc and similar

FEMA ELECTRÓNICA - Page 2

User’s Manual - MAG-35 Process (Model 36)

Instrument for PROCESS in Vdc

Panel meter to measure process signals in 0/10 Vdc and
similar, up to 200 Vdc. Display scalable in engineering units.
Input ranges selectable by internal jumpers and scaling of the
display by potentiometers. Provides excitation voltage from 10
to 24 Vdc regulated, to power-up transducers. Accepts signals
from transducers using 2, 3 and 4 wire connection techniques.

Additional options with relay outputs (1 or 2 relay), analogue
outputs (in mA and Vdc), digital outputs in serial code (RS232
or RS485), parallel BCD code, display «Hold» function and
power options in AC and DC.

Model MAG-35-36

OUTPUT AND CONTROL OPTIONS

MAG-35 instruments can be supplied with different options for
data output and control. Compatibility between them is
indicated at the «Ordering Reference» section down on this
page. Technical data and operating instructions for these
options are indicated in a separate user’s manual.

«SP11» 1 Relay Output
«SP21» 2 Relay Output
«SAR» Analogue Output
«HM» Hold of display
«MPA2» Detection of «peak and drop» signals
«SDA» Parallel BCD
«RS2» Serial RS232 output
«RS4» Serial RS485 output

POWER OPTIONS

MAG-35 instruments can be supplied with different power
options, for different AC and DC power ranges. The instruments
do not have internal protection fuse. The value and type of the
recommended fuse for each power type is indicated below.

Ref. Power Recommended Fuse

«0» 230 Vac 50/60 Hz 50 mA Time Lag
«1» 115 Vac 50/60 Hz 100 mA Time Lag
«2» 24 Vac 50/60 Hz 300 mA Time Lag
«3» 48 Vac 50/60 Hz 150 mA Time Lag
«6» 24 Vdc (15/30 Vdc Isolated) 350 mA Fast Fuse
«8» 48 Vdc (24/65 Vdc Isolated) 200 mA Fast Fuse

DISPLAYS Led 7 Segments Red Color
DIGIT HEIGHT 14 mm (0.55’’)
DISPLAY ±1.8.8.8
POLARITY Automatic ±
DECIMAL POINTS Jumper selectable

INPUT CONFIGURATION Bipolar Simple
A/D CONVERTER Dual slope
INTEGRATION TIME 80 mSec.
NUMBER OF READINGS 3.12 per second
WARM-UP TIME 2 minutes

ACCURACY 0.15% ±1 digit
NMRR 50 dB
THERMAL DRIFT 100 ppM
TEMPCO ZERO 0.13% /ºC F.S.

OVERRANGE +1999 flash
UNDERRANGE -1999 flash

WORKING TEMP. 0°C to +50°C
STORAGE TEMP. -40°C to +80°C
BURN-IN 48 hours
RECALIBRATION Yearly

HOUSING DIN 43700
DIMENSIONS 96 x 48 x 117 mm
PANEL CUT-OUT 44.5 x 92.5 mm
WEIGHT 310 gr.
CONNECTIONS Plug-in screw clamps

CONSUMPTION 5.5 VA in AC

3.5 W in DC

GENERAL SPECIFICATIONS

Model Power Option1 Option2 Option3 Scaling

MAG-35 - - - - - -

36 0 SP11 SAR HM 0/10 Vdc = 0/150.0 mm

1 SP21 MPA2 -20/+150 Vdc = 0/580 BAR
2 SDA ...
3 RS2
6 RS4
8

ORDERING REFERENCE