Felton Digital SMARTFLOW User Manual

USER GUIDE

SMARTFLOW

Digital Thermostatic Shower Mixer

FD-SFCSMC

IMPORTANT SAFETY INFORMATION

Please read these instructions carefully before using this system and keep in a safe place for future reference.

To reduce the risk of electric shock and injury, basic safety precautions, including the following, should always be followed when
using electrical appliances. Children MUST be supervised at all times when using this shower control. Training should be given
to children and vulnerable individuals before permitting them to operate the control. Do not pull on the power cable: this may
damage it and cause electric shock. Never operate any appliance with damaged cable or plug. Do not use an appliance that has
been dropped or damaged or after any malfunctions.

WARNING

Continuously turning the control wheel in the clockwise direction may override the preset maximum
temperature, with consequent risk of scalding. Always take care when operating the control wheel,
and do not leave children unattended whilst the product is in operation.

IMPORTANT: Once powered up, the control must be programmed within one hour, this will set the maximum temperatures,
maximum run time and hygiene intervals.

PRECAUTIONS

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.

2. Children should be supervised to ensure that they do not play with the appliance.

3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied persons in order
to avoid a hazard.

4. This appliance contains battery that are only replaceable by skilled persons.

5. An electronic copy of installation and user guides are available on Felton Digital website – please visit www.feltondigital.co.nz

to view le.

FELTON DIGITAL SMARTFLOW

Felton Digital’s Smartow is an entry level digital, thermostatic shower mixer. Utilising Swiss technology, it features three

customisable memory settings for your perfect shower temperature and ow of water.

It saves water and energy because it heats up to your pre-set shower temperature more quickly and eciently than a regular

shower mixer. Its ease of use, ergonomic operation and thermostatic mixer allows for a safer shower for the whole family –

especially children and the elderly.

Regular shower mixers rely on manual control to regulate ow and temperature. When the hot or cold water supply to a manual

shower mixer uctuates, so does the temperature of the shower.

This may cause a sudden, unpleasant cold shock or potentially dangerous hot scald as the user scrambles to adjust the mixer

back to a comfortable shower temperature.

Smartow is a thermostatic shower mixer which automatically adjusts itself to maintain the shower temperature you have set it to

and shows temperature colour visualisation.

The Smartow was built from a Swiss technology which allows you to alter your water temperature and ow comfortably at the

touch of a button. Additional functions can be set on installation, including maximum run time and temperature, diagnostics and

clean mode. A safety stop slows temperature increase after 40 degrees, and it has a maximum temperature setting of 45°C.

Memory setting

Safe cleaning mode

Eco stop

Anti-scald

Thermal disinfection

Diagnostic

Factory Setting

Three programmable settings for temperature and ow rate

Disabling the unit for 45 sec

The control unit switches o after 30 minutes by default

Slower temperature increase after 40°C

Flushing the outlet with hot water for 2 min

Checking wheel with error indicator

Resetting back to factory settings

FELTON INDUSTRIES LTD

8 Farmhouse Lane, Glen Innes, Auckland 1072

CONTENTS

Operating the water control system

Operating the control 4

Setting the temperature 4

Operating the ow control 5

Setting the temperature and ow memory 5

Advanced activation set up 6 - 7

Troubleshooting 10

Warranty 11

OPERATING THE CONTROL SYSTEM

To turn ON

Press the control

once, the control will
illuminate and water
will start to ow.

To turn OFF

Press the control once,
the water and light will
turn o.

SETTING THE TEMPERATURE

Important: Risk of scalding, please read the Safety Information before using.

COLD WARM HOT

Turn the control
anti-clockwise,
the control will illuminate
blue and will ash until
the set temperature is
reached.

Turn the control
clockwise, the control
will illuminate Orange,
the light will ash until
the temperature is
reached.

4

Continue turning the
control clockwise, the
control will illuminate
Red, the light will ash
until the set temperature
is reached.