Fellowes CC4-2 User Manual

PLEASE READ AND SAVE THIS MANUAL WITH YOUR ORIGINAL RECEIPT

Customer Service: 1-800-955-0959

PRODUCT USAGE GUIDE

CC4-2

Sheet capacity*: 5
Shred type: Confetti
Shred size: 5/32" x 2"
Entry width: 9-1/2"
Recommended use: 10-20 shredding passes per day
Maximum running time: 5-7 min. on/15 minutes off

*Sheet capacity measured with 20 lb., 8-1/2" x 11" paper with the shredder operating at rated voltage.
Different paper weights, humidity, and electrical currents will affect capacity.

USE AND CARE MANUAL

PAPER SHREDDER

Personal Series

MODELS

CC4-2

IMPORTANT SAFEGUARDS

¥ NEVER insert hands or fingers into paper entry as

serious personal injury may result.

¥ THIS MACHINE IS NOT A TOY. Keep children and

pets away from shredder AT ALL TIMES as serious
injury may result. Always unplug shredder when not
in use.

¥ Keep loose objects (jewelry, ties, long hair) away

from shredder. These items and others like them
may cause serious injury if they accidentally fall into
the paper entry.

¥ Confetti cut shredders contain sharp edges on the

underside of the machine. Use caution when posi-

tioning the shredder head onto the basket.
¥ Do not exceed recommended sheet capacity.
¥ Do not shred plastic, continuous forms, adhesive

labels, transparencies, glossy paper, newsprint, or

cardboard.
¥ This personal shredder is intended for paper only.

Do not attempt to shred paper clips or other hard

materials (except staples).
¥ Do not place shredder near or over a heat source or

water.
¥ Always turn off and unplug unit before moving or

cleaning and when not in use.
¥ Do not insert aerosol cleaners into or around the

shredder. Some agents may combust, causing seri-

ous injury.
¥ Never use flammable synthetic oil, petroleum- based

or aerosol lubricants to oil the cutting blades. Some

agents may combust, causing serious injury. Use

only a recommended oil in a non-aerosol con-

tainer. See "MAINTENANCE."

¥ Do not use this product if it or the cord has been

damaged in any way.
¥ Do not open the cover for any reason. Doing so can

expose you to dangerous voltages and will void your

warranty.

Power Cord Care

¥ Place power cord in an easily accessible position,

because it is the main disconnect switch.
¥ Do not place machine where adults, children or ani-

mals may walk on the cord.
¥ Do not rest anything on the power cord.
¥ If an extension cord is used, be sure that all prod-

ucts plugged into the extension cord do not exceed

the extension cord ampere rating.

PARTS OF THE SHREDDER

ASSEMBLY

NOTE: This shredder will operate only when used with

the supplied basket. The supplied basket has a built-in
safety feature which prevents the shredder from oper­ating if used with any other basket or if improperly
assembled.

To assemble shredder:

This shredder contains sharp edges

on the underside of the shredder
head. Use caution when positioning the shredder head
onto the basket.

1. Position shredder head over basket as shown in

Figure 1.

2. Align slot on back of shredder head with the tab on

the inside rear of the basket.

3. Lower shredder head onto basket (while maintain-

ing tab/slot alignment).

Figure 1

A. Paper entry
B. Basket
C. Red LED
D. Auto-start sensor

E. Power switch
F. Shredder head

A

B

E

D

F

C

®