Fellowes BTHS02 Users Manual

Download

Page 1

Bluetooth®Adapter

FOR MOBILE PHONES WITH 2.5MM UNIVERSAL JACK—USER’S GUIDE

Bluetooth Adapter 030105 3/1/05 2.24pm Page BC1

Page 2

NOTES

______________________________________________________________________

Notice

This Users Guide is published without warranty as to the Guide, and it provides no warranty in the referenced product except as provided in the End User Limited Product Warranty. Improvements and modifications to this manual, including those necessitated by typographical errors, inaccuracies or improvements to equipment may be made at any time and without notice.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to your device not expressly approved by Fellowes can void the user's authority to operate the equipment.

BLUETOOTH®is a trademark of the Bluetooth SIG, Inc. The Bluetooth®logo and trademarks are owned by Bluetooth SIG, Inc.

Overview and Phone Compatibility

This Users Guide provides directions on how to use your Body Glove®Bluetooth®Adapter with your mobile phone. The Bluetooth®Adapter only works with mobile phones that have a 2.5mm Universal jack found on Sanyo, most Samsung, Motorola, Kyocera, LG, and other phones. Just pair the adapter to your Bluetooth

Headset (see page 4 for pairing instructions), plug the adapter into your mobile phone, and then use your headset to talk. Now, you can keep your hands free for other tasks at the office or in the car.

NOTE: Please remember driving is your first priority when in the car.

What is Bluetooth® Wireless Technology?

Bluetooth®wireless technology makes it possible to connect consumer electronic devices using a radio link instead of cables to transmit voice and data information. Bluetooth®technology uses a global frequency range to ensure compatible communication with a variety of devices worldwide.

IMPORTANT: If you cannot get your Body Glove

Bluetooth®Adapter to work properly, do NOT return it to the place of purchase. Contact Customer Service directly by dialing 1-800-945-4545 in the U.S. or 008 001 810 1810 in Europe or via email at www.fellowes.com/techsupport/bluetooth.aspx. Please also contact customer service if you need any replacement parts.

FAQs

Throughout this manual, you will find FAQs or Frequently Asked Questions in each section to help guide you through adapter operation. You can also find an expanded list of FAQs at www.fellowes.com/bluetooth. If you have a question that has not been answered in this manual, please contact Customer Service directly by dialing 1-800-945-4545 in the U.S. or 008 001 810 1810 in Europe or via email at www.fellowes.com/techsupport/bluetooth.aspx.

Bluetooth Adapter 030105 3/1/05 2.24pm Page A1

NOTE: To comply with the FCC RF  exposure compliance requirements,  this device and its antenna must not be  co-located or operating to conjunction  with any other antenna or transmitter.

Page 3

NOTE: In the event that you purchase a Bluetooth

enabled mobile phone, you will no longer need your Bluetooth®Adapter. Simply pair your headset to your new Bluetooth®enabled phone to operate your headset as before. For pairing instructions, consult your headset and mobile phone’s users manual.

Pairing FAQs:

What does the pin number have to be on my Bluetooth

headset for it to successfully pair to my Body Glove

Bluetooth®Adapter?

A: You can only pair a Body Glove®Bluetooth®Adapter

with a headset pin number of 0000. If your headset has another pin number, consult your headset users manual for instructions on how to change it.

How do I get the Bluetooth®Adapter to work with my mobile phone?

A: Simply plug the adapter into the connector on your

phone. This makes your non-Bluetooth phone Bluetooth-enabled.

Making and Receiving Calls

Once you have set up the Bluetooth®Adapter to work with your mobile phone, you can make and receive calls using the headset as long as both are turned on and within range of each other (up to 10m. /30 ft.).

NOTE: The LED Indicator Light flashes green during calls to indicate phone communication.

Limited Warranty

Fellowes warrants this product to be free from defects in manufacturing for one year from the date of original retail purchase. This warranty extends only to the original retail purchaser, and does not apply if the product has been damaged or fails to function properly as a result of misuse, abuse, alteration, or improper cleaning or maintenance. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL RETAIL PURCHASE. Fellowes’ sole obligation under this warranty or any implied warranty, and the purchaser’s sole remedy, is limited to the repair or replacement, at Fellowes’ option, of the product or any defective part. IN NO EVENT SHALL FELLOWES, ITS AFFILIATES, SUBSIDIARIES, RELATED ENTITIES OR THEIR RESPECTIVE OFFICERS, DIRECTORS, OR EMPLOYEES, BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR SPECIAL DAMAGES. To make a claim, write to WARRANTY CLAIMS, Fellowes, Inc., 1789 Norwood Ave., Itasca, IL 60143.

Technical Specifications

Bluetooth®Profile GAP, SPP Range Up to 10 meters Frequency Range 2.4 - 2.4835 GHz RF Transmit Power 0 dbm Receiver Sensitivity -79 dBm Operating Temperature -20° to +70°C

Bluetooth®Adapter Controls

Attaching and Detaching the Belt Clip

To attach Belt Clip:

1. Position belt clip onto corresponding side of adapter (Figure 1).

2. Push other side of belt clip towards adapter until it snaps into position (Figure 2).

To detach Belt Clip:

1. Apply light pressure to one side of belt clip, away from the adapter, until belt clip detaches. Only one side needs to be unclipped to detach the belt clip.

Getting Started

It Only Takes 4 Easy Steps to Use Your Body Glove

Bluetooth Adapter:

1. Charge Adapter 2. Pair Adapter to Headset

Figure 1 Figure 2

Figure 3

3. Plug Adapter into Mobile Phone

4. Use Headset to Talk

Bluetooth Adapter 030105 3/1/05 2.24pm Page A3

Page 4

General Adapter Operation

To turn Bluetooth®Adapter on: Press and hold

on/off button briefly. The LED Indicator Light will flash green, then at intervals to show unit is on.

To turn Bluetooth®Adapter off: Press and hold on/off button briefly. The LED Indicator Light will flash green once and then stay off. The unit is now off.

Pairing

What is Pairing?

“Pairing” creates the wireless connection between your Body Glove

Bluetooth®Adapter and your Bluetooth®Headset. When the adapter and headset are paired to each other, they will only communicate with each other, until you choose to pair them with a different device

NOTE: If your Bluetooth®Adapter is not paired with the headset, you will be unable to use your Bluetooth

Headset with your mobile phone.

Pairing the Adapter to Your Bluetooth

Headset

1. Put your Body Glove®Bluetooth®Headset into pairing mode as described by your headset’s users manual.

2. Now, put the Bluetooth®Adapter in pairing mode as well. Simply press the pairing button on the Bluetooth®Adapter until the LED Indicator Light flashes red and green.

3. When both the Bluetooth®Adapter and Bluetooth

Headset are in pairing mode, they will search for each other. After 8-10 seconds, they will pair to each other. NOTE: Make sure that there are no other active Bluetooth®devices in the area as it can disrupt the pairing process.

4. If pairing between the headset and the Bluetooth

Adapter is successful, the Bluetooth®Adapter’s LED Indicator Light will flash solid green for 2 seconds and then return to standby mode. Your headset should also go into standby mode. You can now plug your Bluetooth®Adapter into the headset jack of your phone and use your Bluetooth®Headset.

5. If the Bluetooth®Adapter finds no devices or finds more than one device, it will flash red for 2 seconds to indicate an error and then return to standby mode.

6. If pairing is unsuccessful, repeat the entire pairing process. Make sure that both the Bluetooth®Adapter and your Bluetooth®Headset are in pairing mode at the same time.

Connecting the Adapter to the Charger

The plug configuration of the power supply is appropriate to the country where your Bluetooth

Adapter was purchased. If you travel to foreign countries and wish to charge your Bluetooth®Adapter, you will need to purchase the appropriate plug adapter for the country you are visiting. Your charger has a cable approx. 23cm (9 inches) long.

Please refer to the Illustration below before charging your adapter.

IMPORTANT NOTE: The charger is ‘keyed’ to fit only ONE WAY into your Bluetooth

Adapter. Do not force the charger cable into the connecting port of the Bluetooth®Adapter as this may damage the unit and void your warranty.

Charging FAQs:

How do I know when my adapter is fully charged?

A: The LED Indicator Light will turn from red to green

when headset is fully charged.

My adapter won’t charge. What should I do?

A: Your adapter is not charging if there is no light shown

on the LED. Try taking your adapter off the charger and reconnecting it until you see the red light.

LED Light Color Battery or Charging Status

Solid Red Battery charging while Bluetooth®Adapter is off Solid Green When Bluetooth®Adapter is off and fully charged, LED light glows green 2 Red Flashes Low battery power (LED light will flash until the battery runs out or is charged)

Charging Your Adapter

The Body Glove®Bluetooth®Adapter uses a rechargeable Lithium-Polymer Battery that must be fully charged before you use the adapter for the first time.

• Use only the charger supplied with the adapter. (Other chargers may damage unit and void the warranty)

• Use the table below as your reference for charging status

Figure 5

Figure 6

Figure 4

Bluetooth Adapter 030105 3/1/05 2.24pm Page A5

Fellowes BTHS02 Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual