Fellowes 120, 120CC User Manual

Paper shredder 120 CC

POWERSHRED

OPERATING INSTRUCTIONS

NOTICE D'UTILISATION

MANUAL DEL PROPIETARIO

BETRIEBSANLEITUNG

120

®

POWERSHRED 320

ON

120
120CC

Edition 11/00 1.598.999.100 1

1.598.999.100 – Edition 11/00

120
120 CC Paper shredder

USA

Paper shredder Fellowes 120/120 CC ............................................................. 3 – 8

F

Déchiqueteuse Fellowes 120/120 CC ............................................................ 9 – 14

Destructora de documentos Fellowes 120/120 CC ...................................... 15 – 20

E

D

Aktenvernichter Fellowes 120/120 CC .......................................................... 21 - 26

2 1.598.999.100 Edition 11/00

120

Paper shredder 120 CC

Contents

Contents Page

1. Important Safety Instructions.................................................................................. 4

2. Parts Identification .................................................................................................. 4

3. Caution ................................................................................................................... 4

4. Technical Specifications ......................................................................................... 5

5. Supplies.................................................................................................................. 6

6. Installation .............................................................................................................. 6

7. Operation................................................................................................................ 6

8. Checklist for Inoperative Machine .......................................................................... 7

9. Malfunctions ........................................................................................................... 7

10. Maintenance ........................................................................................................... 7

11. Warranty ................................................................................................................. 8

12. Customer Service ................................................................................................... 8

Edition 11/00 1.598.999.100 3

USA

120
120 CC Paper shredder

1. Important Safety Instructions

1. Read all instructions before use.

2. Save these instructions for later use.

3. Follow all warnings and instructions
marked on the proudct.

4. Unplug this product before cleaning.
Clean with a damp cloth using a mild
soap and water solution. (Do not use
abrasives or petroleum products.)

5. Place this product as close as possible to
power source for quick and easy
unplugging.

6. Do not use this product near water.

7. This product should never be placed near
or over a radiator or heat source.

8. Operate from the type power source
indicated on the marking label. If you are
not sure of the type of power available,
consult your dealer or local electric
company.

9. Do not allow anything to rest on the power
cord. Do not place this product where
people may walk on the cord.

10. If an extension cord is used with this
product, make sure that the total of the
ampere ratings on the products plugged
into the extension cord do not exceed the
extension cord ampere rating. Also, make
sure that the total of all products plugged
into the wall outlet does not exceed 15 amps.

11. Do not attempt to service this product
yourself, as opening or removing covers
may expose you to dangerous live parts
or other risks.

12. Unplug this product and refer servicing to
qualified personnel under the following
conditions:

A) When the power cord or plug is damaged

or frayed.

B) If liquid has been spilled on the product.
C) If the product has been exposed to rain.
D) If the product does not operate normally

when the operating instructions are
followed.

E) If the product has been dropped or

the casing has been damaged.

13. Keep out of reach of children.

14. This shredder should be operated only with an
operator in attendance.

2. Parts Identification

8

7
6

1. Rocker switch

2. Cover

3. Serial label

4. Caution label

5. Cabinet

6. Waste container

7. Paper feed opening

8. Automatic start stop control

POWERSHRED 320

3. Caution

Never insert hand, fingers or any
foreign objects into the feed
opening.

Serious injury may result.

Keep all loose articles of
clothing, ties, jewelery, long hair
or other loose objects away from
feed opening.

Injury may result.

Always turn off and unplug the
machine before moving,
servicing, cleaning or any other
conduct other than normal
operation.

Serious injury may result.

1
2

ON

Fellowes Manufacturing Co.
1789 Norwood Avenue

R

Itasca, IL 60143 USA

Model:
Serial #:
Voltage: Motor:
Current: Manufactured:

R

3

R

4

5

4 1.598.999.100 Edition 11/00

USA

Paper shredder 120 CC

4. Technical Specifications

Model 120 Model 120CC

Cutting style Strip cut Cross cut
Shred size 5/32" 5/32" x 1"

(3.9 mm) (3.9 x 30 mm)

120

Security rating

DIN 32757–1 23

Sheet capacity ­ 8-1/2" x 11" - 20 lb. 12 8
A4, 70g/m2 (16 lb.) 14 10

Speed 20FPM 22FPM

(80 mm/s) (90 mm/s)

Entry width approx. 93/4" approx. 93/4"

(240 mm) (240 mm)

**Motor power 2/3 H.P. 2/3 H.P.

(270 W) (270 W)

Input voltage 100 V, 50 Hz 100 V, 50 Hz

(Depending on country) 115V, 60 Hz 115V, 60 Hz

220/240V, 50 Hz 220/240V, 50 Hz

3

Dimensions 14

/4" x 10" x 211/2" (375 x 250 x 550 mm)

Weight 241/4 lbs. (11 kg)
Waste container volume 7.6 gallons (29 liters)
Noise level 53 dB in idle – 59 - 63 dB under load

*Paper DIN 19307 SM 4a – 70
** for the maximum number of sheets

Edition 11/00 1.598.999.100 5

USA

120
120 CC Paper shredder

5. Supplies

– Bags for cut material

(Packed in dispenser carton, 50 or 100 bags
to a roll depending on size. For bag informa­tion, see label on inside of the waste container.
If label is missing, contact Fellowes or your
local Fellowes dealer for the stock number of
the bag that fits your machine.)

– Cutting block oil for cross-cut units

Stock # 35250.

6. Installation

– The paper shredder is supplied ready for

operation.

– Operate this product only from the type of

power source indicated on the marking label.

– Install the paper shredder so that the plug is

easily accessible.

– Shredder must be operated in upright position

only.

– Set up paper shredder so that the ventilation

slots are unobstructed. To ensure sufficient
ventilation of the shredder a minimum distance
of 4" (10 cm) to the wall or to the furniture must
be maintained.

Switching equipment ON

1

– Press rocker switch to pos. (1)

• Controller switch locks in "on" position.

• Equipment is ready for operation

(standby).

– Feed paper

• The shredding process is started by
automatic start stop control in the paper
feed opening. Insert paper and
shredding begins automatically.

• When the shredding is complete, the
cutting system automatically stops
after approx. 3 seconds.

Switching equipment OFF

– Press rocker switch to pos. (3)

• switch resets to center position and

3

stops the cutting system.

7. Operation

Read operating instructions before
operating the shredder.

Insert plug in power outlet.

To avoid motor overload, the paper
shredders may cut out automatically
after approx. 20 minutes of continuous
operation.

6 1.598.999.100 Edition 11/00

USA

120

Paper shredder 120 CC

8. Checklist for Inoperative Machine

If the equipment does not work properly, please
check the following points first:

– Is the plug inserted ?
– Is the switch turned on ?
– Is waste container pushed in properly ?
– Is waste container full ?

Empty container
– Is there a paper jam in the shredder ?
See Malfunctions
– Is the motor overheated ?

Switch machine off and allow motor to

cool down for approximately 15–20 min.

If none of the above applies and the equipment still
does not run, please contact the appropriate
customer service department.

9. Malfunctions

Paper jam

Door contact interrupted

– Paper shredder switches off automati-

cally. Press rocker switch to center (2)

2

position.

• Check whether cut material container is
properly pushed into bottom frame.

1

• Return switch to "on" position (1) and
continue shredding.

Cut material container full

– Paper shredder switches off automati-

cally.

2

• Press rocker switch to center (2)
position.

• Empty cut material container or
exchange cut material bag.

1

• Return switch to "on" position (1) and
continue shredding.

• Press rocker switch to center position

2

(2) to stop the cutting system.

• Press and hold down rocker switch in
pos. (3) to reverse the cutting system

3

and back out jammed material
(paper is pushed out)

Caution!

1

Do not

forwards/backwards in pos. (1 and 3)

3

press rocker switch alternately

• Remove excess paper.

• Return switch to pos. (1) and continue

1

shredding in smaller quantities so as
not to jam the machine further.

10. Maintenance

(Cross cut unit only)

– When tearing capacity drops or the noise

increases:

• Spray special cutting block oil onto
cutting system.

• Run cutting system forward (1) and

1

backward (3) several times without

3

feeding paper.

• Continue shredding.

Edition 11/00 1.598.999.100 7

USA

120
120 CC Paper shredder

11. Warranty

FELLOWES® POWERSHRED LIMITED
WARRANTY

1 year
5 years

Fellowes® warrants this product to be free from
defects in material and workmanship for a
period of one year from the date of purchase by
the original consumer. At it's option, Fellowes
will repair or replace without charge for material
or labor, any component found to be defective
during the warranty period. Additionally, the
cutting cylinders are warranted for 5 years from
the original purchase date and will be replaced
without charge for material or labor if found by
Fellowes® to be defective.

Warranty Exclusions

The parties agree that the buyer's sole and
exclusive remedy against Fellowes® shall be for
the repair or replacement of defective parts as
provided herein. The buyer agrees that no
other remedy (including, but not limited to,
incidental or consequential damages for lost
profits, lost sales, injury to property or any other
incidental or consequential loss) shall be
available to him. This warranty shall NOT apply
and is void under the following circumstances:

1. When this product or any part thereof has been
subjected to accident, alteration, abuse, or
misuse.

2. When the original Model and Serial Number
Plate has been altered, effaced or removed.

3. When repair or service covered under this
warranty (other than routine maintenance
(as described in the
performed by personnel without the express
written consent of Fellowes®.

4. When the product has been used pursuant to
any verbal or written rental, lease or loan
agreement.

THIS WARRANTY DESCRIBED HEREIN SHALL
BE IN LIEU OF ANY OTHER WARRANTY,
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. ANY REPRESENTA­TIONS OR PROMISES INCONSISTENT WITH OR
IN ADDITION TO THIS WARRANTY ARE
UNAUTHORIZED AND SHALL NOT BE BINDING
UPON FELLOWES.

on all parts and labor

parts and labor on cutting cylinders

Owner's Manual

) has been

®

12. Customer Service

United States

Fellowes Manufacturing Co.
1789 Norwood Avenue
Itasca, IL 60143

Tel.: [phone]

Canada

Fellowes Manufacturing of Canada Ltd.
2750 John Street
Markham, Ontario L3R 2W4

Tel.: [phone]

United Kingdom

Fellowes Manufacturing UK Ltd.
Doncaster Road
Kirk Sandall
Doncaster, South Yorkshire DN3 1HT

Tel.: [phone]

Australia

Fellowes Manufacturing (Australia) Pty.Ltd.
10 Fellowes Court
Tullamarine, Victoria 3043

Tel.: [phone] in Melbourne

1-800-331-177 outside Melbourne

Nederland

Fellowes
P.O. Box 180
4130 Ed Vianen
Nederland

Tel.: [phone]

Germany

Fellowes GmbH
Dieselstraße 27
D-30827 Garbsen

Tel.: [phone]

France

Fellowes Lynx S.A.
194 allée de la Croix des Hormes
69250 Montanay

Tel.: [phone]

8 1.598.999.100 Edition 11/00

USA